Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_LPC1549/LPC15xx.h
- Committer:
- ricardobtez
- Date:
- 2016-04-05
- Revision:
- 118:16969dd821af
- Parent:
- 86:04dd9b1680ae
- Child:
- 105:8ed44a420e5c
File content as of revision 118:16969dd821af:
/****************************************************************************************************//**
* @file LPC15xx.h
*
* @brief CMSIS Cortex-M3 Peripheral Access Layer Header File for
* LPC15xx from .
*
* @version V0.3
* @date 17. July 2013
*
* @note Generated with SVDConv V2.80
* from CMSIS SVD File 'H2_v0.3.svd' Version 0.3,
*
* modified by Keil
* modified by ytsuboi
*******************************************************************************************************/
/** @addtogroup (null)
* @{
*/
/** @addtogroup LPC15xx
* @{
*/
#ifndef LPC15XX_H
#define LPC15XX_H
#ifdef __cplusplus
extern "C" {
#endif
/* ------------------------- Interrupt Number Definition ------------------------ */
typedef enum {
/* ------------------- Cortex-M3 Processor Exceptions Numbers ------------------- */
Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation
and No Match */
BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
related Fault */
UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
SysTick_IRQn = -1, /*!< 15 System Tick Timer */
/* --------------------- LPC15xx Specific Interrupt Numbers --------------------- */
WDT_IRQn = 0, /*!< 0 WDT */
BOD_IRQn = 1, /*!< 1 BOD */
FLASH_IRQn = 2, /*!< 2 FLASH */
EE_IRQn = 3, /*!< 3 EE */
DMA_IRQn = 4, /*!< 4 DMA */
GINT0_IRQn = 5, /*!< 5 GINT0 */
GINT1_IRQn = 6, /*!< 6 GINT1 */
PIN_INT0_IRQn = 7, /*!< 7 PIN_INT0 */
PIN_INT1_IRQn = 8, /*!< 8 PIN_INT1 */
PIN_INT2_IRQn = 9, /*!< 9 PIN_INT2 */
PIN_INT3_IRQn = 10, /*!< 10 PIN_INT3 */
PIN_INT4_IRQn = 11, /*!< 11 PIN_INT4 */
PIN_INT5_IRQn = 12, /*!< 12 PIN_INT5 */
PIN_INT6_IRQn = 13, /*!< 13 PIN_INT6 */
PIN_INT7_IRQn = 14, /*!< 14 PIN_INT7 */
RIT_IRQn = 15, /*!< 15 RIT */
SCT0_IRQn = 16, /*!< 16 SCT0 */
SCT1_IRQn = 17, /*!< 17 SCT1 */
SCT2_IRQn = 18, /*!< 18 SCT2 */
SCT3_IRQn = 19, /*!< 19 SCT3 */
MRT_IRQn = 20, /*!< 20 MRT */
UART0_IRQn = 21, /*!< 21 UART0 */
UART1_IRQn = 22, /*!< 22 UART1 */
UART2_IRQn = 23, /*!< 23 UART2 */
I2C0_IRQn = 24, /*!< 24 I2C0 */
SPI0_IRQn = 25, /*!< 25 SPI0 */
SPI1_IRQn = 26, /*!< 26 SPI1 */
C_CAN0_IRQn = 27, /*!< 27 C_CAN0 */
USB_IRQ_IRQn = 28, /*!< 28 USB_IRQ */
USB_FIQ_IRQn = 29, /*!< 29 USB_FIQ */
USBWAKEUP_IRQn = 30, /*!< 30 USBWAKEUP */
ADC0_SEQA_IRQn = 31, /*!< 31 ADC0_SEQA */
ADC0_SEQB_IRQn = 32, /*!< 32 ADC0_SEQB */
ADC0_THCMP_IRQn = 33, /*!< 33 ADC0_THCMP */
ADC0_OVR_IRQn = 34, /*!< 34 ADC0_OVR */
ADC1_SEQA_IRQn = 35, /*!< 35 ADC1_SEQA */
ADC1_SEQB_IRQn = 36, /*!< 36 ADC1_SEQB */
ADC1_THCMP_IRQn = 37, /*!< 37 ADC1_THCMP */
ADC1_OVR_IRQn = 38, /*!< 38 ADC1_OVR */
DAC_IRQn = 39, /*!< 39 DAC */
CMP0_IRQn = 40, /*!< 40 CMP0 */
CMP1_IRQn = 41, /*!< 41 CMP1 */
CMP2_IRQn = 42, /*!< 42 CMP2 */
CMP3_IRQn = 43, /*!< 43 CMP3 */
QEI_IRQn = 44, /*!< 44 QEI */
RTC_ALARM_IRQn = 45, /*!< 45 RTC_ALARM */
RTC_WAKE_IRQn = 46 /*!< 46 RTC_WAKE */
} IRQn_Type;
/** @addtogroup Configuration_of_CMSIS
* @{
*/
/* ================================================================================ */
/* ================ Processor and Core Peripheral Section ================ */
/* ================================================================================ */
/* ----------------Configuration of the Cortex-M3 Processor and Core Peripherals---------------- */
#define __CM3_REV 0x0201 /*!< Cortex-M3 Core Revision */
#define __MPU_PRESENT 0 /*!< MPU present or not */
#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
/** @} */ /* End of group Configuration_of_CMSIS */
#include "core_cm3.h" /*!< Cortex-M3 processor and core peripherals */
#include "system_LPC15xx.h" /*!< LPC15xx System */
/* ================================================================================ */
/* ================ Device Specific Peripheral Section ================ */
/* ================================================================================ */
/** @addtogroup Device_Peripheral_Registers
* @{
*/
/* ------------------- Start of section using anonymous unions ------------------ */
#if defined(__CC_ARM)
#pragma push
#pragma anon_unions
#elif defined(__ICCARM__)
#pragma language=extended
#elif defined(__GNUC__)
/* anonymous unions are enabled by default */
#elif defined(__TMS470__)
/* anonymous unions are enabled by default */
#elif defined(__TASKING__)
#pragma warning 586
#else
#warning Not supported compiler type
#endif
/* ================================================================================ */
/* ================ GPIO_PORT ================ */
/* ================================================================================ */
/**
* @brief General Purpose I/O (GPIO) (GPIO_PORT)
*/
typedef struct { /*!< GPIO_PORT Structure */
__IO uint8_t B[76]; /*!< Byte pin registers */
__I uint32_t RESERVED0[45];
__IO uint32_t W[76]; /*!< Word pin registers */
__I uint32_t RESERVED1[1908];
__IO uint32_t DIR[3]; /*!< Port Direction registers */
__I uint32_t RESERVED2[29];
__IO uint32_t MASK[3]; /*!< Port Mask register */
__I uint32_t RESERVED3[29];
__IO uint32_t PIN[3]; /*!< Port pin register */
__I uint32_t RESERVED4[29];
__IO uint32_t MPIN[3]; /*!< Masked port register */
__I uint32_t RESERVED5[29];
__IO uint32_t SET[3]; /*!< Write: Set port register Read: port output bits */
__I uint32_t RESERVED6[29];
__O uint32_t CLR[3]; /*!< Clear port */
__I uint32_t RESERVED7[29];
__O uint32_t NOT[3]; /*!< Toggle port */
} LPC_GPIO_PORT_Type;
/* ================================================================================ */
/* ================ DMA ================ */
/* ================================================================================ */
/**
* @brief DMA controller (DMA)
*/
typedef struct { /*!< DMA Structure */
__IO uint32_t CTRL; /*!< DMA control. */
__I uint32_t INTSTAT; /*!< Interrupt status. */
__IO uint32_t SRAMBASE; /*!< SRAM address of the channel configuration table. */
__I uint32_t RESERVED0[5];
__IO uint32_t ENABLESET0; /*!< Channel Enable read and Set for all DMA channels. */
__I uint32_t RESERVED1;
__O uint32_t ENABLECLR0; /*!< Channel Enable Clear for all DMA channels. */
__I uint32_t RESERVED2;
__I uint32_t ACTIVE0; /*!< Channel Active status for all DMA channels. */
__I uint32_t RESERVED3;
__I uint32_t BUSY0; /*!< Channel Busy status for all DMA channels. */
__I uint32_t RESERVED4;
__IO uint32_t ERRINT0; /*!< Error Interrupt status for all DMA channels. */
__I uint32_t RESERVED5;
__IO uint32_t INTENSET0; /*!< Interrupt Enable read and Set for all DMA channels. */
__I uint32_t RESERVED6;
__O uint32_t INTENCLR0; /*!< Interrupt Enable Clear for all DMA channels. */
__I uint32_t RESERVED7;
__IO uint32_t INTA0; /*!< Interrupt A status for all DMA channels. */
__I uint32_t RESERVED8;
__IO uint32_t INTB0; /*!< Interrupt B status for all DMA channels. */
__I uint32_t RESERVED9;
__O uint32_t SETVALID0; /*!< Set ValidPending control bits for all DMA channels. */
__I uint32_t RESERVED10;
__O uint32_t SETTRIG0; /*!< Set Trigger control bits for all DMA channels. */
__I uint32_t RESERVED11;
__O uint32_t ABORT0; /*!< Channel Abort control for all DMA channels. */
__I uint32_t RESERVED12[225];
__IO uint32_t CFG0; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT0; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG0; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED13;
__IO uint32_t CFG1; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT1; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG1; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED14;
__IO uint32_t CFG2; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT2; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG2; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED15;
__IO uint32_t CFG3; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT3; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG3; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED16;
__IO uint32_t CFG4; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT4; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG4; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED17;
__IO uint32_t CFG5; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT5; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG5; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED18;
__IO uint32_t CFG6; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT6; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG6; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED19;
__IO uint32_t CFG7; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT7; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG7; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED20;
__IO uint32_t CFG8; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT8; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG8; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED21;
__IO uint32_t CFG9; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT9; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG9; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED22;
__IO uint32_t CFG10; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT10; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG10; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED23;
__IO uint32_t CFG11; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT11; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG11; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED24;
__IO uint32_t CFG12; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT12; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG12; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED25;
__IO uint32_t CFG13; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT13; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG13; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED26;
__IO uint32_t CFG14; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT14; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG14; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED27;
__IO uint32_t CFG15; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT15; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG15; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED28;
__IO uint32_t CFG16; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT16; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG16; /*!< Transfer configuration register for DMA channel 0. */
__I uint32_t RESERVED29;
__IO uint32_t CFG17; /*!< Configuration register for DMA channel 0. */
__I uint32_t CTLSTAT17; /*!< Control and status register for DMA channel 0. */
__IO uint32_t XFERCFG17; /*!< Transfer configuration register for DMA channel 0. */
} LPC_DMA_Type;
/* ================================================================================ */
/* ================ USB ================ */
/* ================================================================================ */
/**
* @brief USB device controller (USB)
*/
typedef struct { /*!< USB Structure */
__IO uint32_t DEVCMDSTAT; /*!< USB Device Command/Status register */
__IO uint32_t INFO; /*!< USB Info register */
__IO uint32_t EPLISTSTART; /*!< USB EP Command/Status List start address */
__IO uint32_t DATABUFSTART; /*!< USB Data buffer start address */
__IO uint32_t LPM; /*!< Link Power Management register */
__IO uint32_t EPSKIP; /*!< USB Endpoint skip */
__IO uint32_t EPINUSE; /*!< USB Endpoint Buffer in use */
__IO uint32_t EPBUFCFG; /*!< USB Endpoint Buffer Configuration register */
__IO uint32_t INTSTAT; /*!< USB interrupt status register */
__IO uint32_t INTEN; /*!< USB interrupt enable register */
__IO uint32_t INTSETSTAT; /*!< USB set interrupt status register */
__IO uint32_t INTROUTING; /*!< USB interrupt routing register */
__I uint32_t RESERVED0;
__I uint32_t EPTOGGLE; /*!< USB Endpoint toggle register */
} LPC_USB_Type;
/* ================================================================================ */
/* ================ CRC ================ */
/* ================================================================================ */
/**
* @brief Cyclic Redundancy Check (CRC) engine (CRC)
*/
typedef struct { /*!< CRC Structure */
__IO uint32_t MODE; /*!< CRC mode register */
__IO uint32_t SEED; /*!< CRC seed register */
union {
__O uint32_t WR_DATA; /*!< CRC data register */
__I uint32_t SUM; /*!< CRC checksum register */
};
} LPC_CRC_Type;
/* ================================================================================ */
/* ================ SCT0 ================ */
/* ================================================================================ */
/**
* @brief Large State Configurable Timers 0/1 (SCT0/1) (SCT0)
*/
typedef struct { /*!< SCT0 Structure */
__IO uint32_t CONFIG; /*!< SCT configuration register */
__IO uint32_t CTRL; /*!< SCT control register */
__IO uint32_t LIMIT; /*!< SCT limit register */
__IO uint32_t HALT; /*!< SCT halt condition register */
__IO uint32_t STOP; /*!< SCT stop condition register */
__IO uint32_t START; /*!< SCT start condition register */
__IO uint32_t DITHER; /*!< SCT dither condition register */
__I uint32_t RESERVED0[9];
__IO uint32_t COUNT; /*!< SCT counter register */
__IO uint32_t STATE; /*!< SCT state register */
__I uint32_t INPUT; /*!< SCT input register */
__IO uint32_t REGMODE; /*!< SCT match/capture registers mode register */
__IO uint32_t OUTPUT; /*!< SCT output register */
__IO uint32_t OUTPUTDIRCTRL; /*!< SCT output counter direction control register */
__IO uint32_t RES; /*!< SCT conflict resolution register */
__IO uint32_t DMAREQ0; /*!< SCT DMA request 0 register */
__IO uint32_t DMAREQ1; /*!< SCT DMA request 1 register */
__I uint32_t RESERVED1[35];
__IO uint32_t EVEN; /*!< SCT event enable register */
__IO uint32_t EVFLAG; /*!< SCT event flag register */
__IO uint32_t CONEN; /*!< SCT conflict enable register */
__IO uint32_t CONFLAG; /*!< SCT conflict flag register */
union {
__I uint32_t CAP0; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH0; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP1; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH1; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP2; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH2; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP3; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH3; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP4; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH4; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP5; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH5; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__I uint32_t CAP6; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH6; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__IO uint32_t MATCH7; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP7; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__I uint32_t CAP8; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH8; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__IO uint32_t MATCH9; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP9; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__IO uint32_t MATCH10; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP10; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__IO uint32_t MATCH11; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP11; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__IO uint32_t MATCH12; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP12; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__IO uint32_t MATCH13; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP13; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
union {
__I uint32_t CAP14; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
__IO uint32_t MATCH14; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
};
union {
__IO uint32_t MATCH15; /*!< SCT match value register of match channels 0 to 15; REGMOD0
to REGMODE15 = 0 */
__I uint32_t CAP15; /*!< SCT capture register of capture channel 0 to 15; REGMOD0 to
REGMODE15 = 1 */
};
__IO uint32_t FRACMAT0; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__IO uint32_t FRACMAT1; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__IO uint32_t FRACMAT2; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__IO uint32_t FRACMAT3; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__IO uint32_t FRACMAT4; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__IO uint32_t FRACMAT5; /*!< Fractional match registers 0 to 5 for SCT match value registers
0 to 5. */
__I uint32_t RESERVED2[42];
union {
__IO uint32_t CAPCTRL0; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL0; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t MATCHREL1; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL1; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t MATCHREL2; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL2; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t CAPCTRL3; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL3; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL4; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL4; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL5; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL5; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t MATCHREL6; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL6; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t MATCHREL7; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL7; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t CAPCTRL8; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL8; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL9; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL9; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL10; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL10; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL11; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL11; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t MATCHREL12; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL12; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t MATCHREL13; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
__IO uint32_t CAPCTRL13; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
};
union {
__IO uint32_t CAPCTRL14; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL14; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
union {
__IO uint32_t CAPCTRL15; /*!< SCT capture control register 0 to 15; REGMOD0 = 1 to REGMODE15
= 1 */
__IO uint32_t MATCHREL15; /*!< SCT match reload value register 0 to 15; REGMOD0 = 0 to REGMODE15
= 0 */
};
__IO uint32_t FRACMATREL0; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__IO uint32_t FRACMATREL1; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__IO uint32_t FRACMATREL2; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__IO uint32_t FRACMATREL3; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__IO uint32_t FRACMATREL4; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__IO uint32_t FRACMATREL5; /*!< Fractional match reload registers 0 to 5 for SCT match value
registers 0 to 5. */
__I uint32_t RESERVED3[42];
__IO uint32_t EV0_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV0_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV1_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV1_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV2_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV2_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV3_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV3_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV4_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV4_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV5_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV5_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV6_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV6_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV7_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV7_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV8_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV8_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV9_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV9_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV10_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV10_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV11_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV11_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV12_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV12_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV13_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV13_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV14_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV14_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV15_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV15_CTRL; /*!< SCT event control register 0 */
__I uint32_t RESERVED4[96];
__IO uint32_t OUT0_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT0_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT1_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT1_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT2_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT2_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT3_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT3_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT4_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT4_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT5_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT5_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT6_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT6_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT7_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT7_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT8_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT8_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT9_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT9_CLR; /*!< SCT output 0 clear register */
} LPC_SCT0_Type;
/* ================================================================================ */
/* ================ SCT2 ================ */
/* ================================================================================ */
/**
* @brief Small State Configurable Timers 2/3 (SCT2/3) (SCT2)
*/
typedef struct { /*!< SCT2 Structure */
__IO uint32_t CONFIG; /*!< SCT configuration register */
__IO uint32_t CTRL; /*!< SCT control register */
__IO uint32_t LIMIT; /*!< SCT limit register */
__IO uint32_t HALT; /*!< SCT halt condition register */
__IO uint32_t STOP; /*!< SCT stop condition register */
__IO uint32_t START; /*!< SCT start condition register */
__I uint32_t RESERVED0[10];
__IO uint32_t COUNT; /*!< SCT counter register */
__IO uint32_t STATE; /*!< SCT state register */
__I uint32_t INPUT; /*!< SCT input register */
__IO uint32_t REGMODE; /*!< SCT match/capture registers mode register */
__IO uint32_t OUTPUT; /*!< SCT output register */
__IO uint32_t OUTPUTDIRCTRL; /*!< SCT output counter direction control register */
__IO uint32_t RES; /*!< SCT conflict resolution register */
__IO uint32_t DMAREQ0; /*!< SCT DMA request 0 register */
__IO uint32_t DMAREQ1; /*!< SCT DMA request 1 register */
__I uint32_t RESERVED1[35];
__IO uint32_t EVEN; /*!< SCT event enable register */
__IO uint32_t EVFLAG; /*!< SCT event flag register */
__IO uint32_t CONEN; /*!< SCT conflict enable register */
__IO uint32_t CONFLAG; /*!< SCT conflict flag register */
union {
__I uint32_t CAP0; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH0; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
union {
__I uint32_t CAP1; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH1; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
union {
__I uint32_t CAP2; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH2; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
union {
__IO uint32_t MATCH3; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
__I uint32_t CAP3; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
};
union {
__I uint32_t CAP4; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH4; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
union {
__IO uint32_t MATCH5; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
__I uint32_t CAP5; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
};
union {
__I uint32_t CAP6; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH6; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
union {
__I uint32_t CAP7; /*!< SCT capture register of capture channel 0 to 7; REGMOD0 to REGMODE7
= 1 */
__IO uint32_t MATCH7; /*!< SCT match value register of match channels 0 to 7; REGMOD0 to
REGMODE7 = 0 */
};
__I uint32_t RESERVED2[56];
union {
__IO uint32_t CAPCTRL0; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL0; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
union {
__IO uint32_t CAPCTRL1; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL1; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
union {
__IO uint32_t CAPCTRL2; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL2; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
union {
__IO uint32_t MATCHREL3; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
__IO uint32_t CAPCTRL3; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
};
union {
__IO uint32_t CAPCTRL4; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL4; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
union {
__IO uint32_t MATCHREL5; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
__IO uint32_t CAPCTRL5; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
};
union {
__IO uint32_t CAPCTRL6; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL6; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
union {
__IO uint32_t CAPCTRL7; /*!< SCT capture control register 0 to 7; REGMOD0 = 1 to REGMODE7
= 1 */
__IO uint32_t MATCHREL7; /*!< SCT match reload value register 0 to 7; REGMOD0 = 0 to REGMODE7
= 0 */
};
__I uint32_t RESERVED3[56];
__IO uint32_t EV0_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV0_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV1_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV1_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV2_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV2_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV3_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV3_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV4_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV4_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV5_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV5_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV6_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV6_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV7_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV7_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV8_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV8_CTRL; /*!< SCT event control register 0 */
__IO uint32_t EV9_STATE; /*!< SCT event state register 0 */
__IO uint32_t EV9_CTRL; /*!< SCT event control register 0 */
__I uint32_t RESERVED4[108];
__IO uint32_t OUT0_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT0_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT1_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT1_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT2_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT2_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT3_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT3_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT4_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT4_CLR; /*!< SCT output 0 clear register */
__IO uint32_t OUT5_SET; /*!< SCT output 0 set register */
__IO uint32_t OUT5_CLR; /*!< SCT output 0 clear register */
} LPC_SCT2_Type;
/* ================================================================================ */
/* ================ ADC0 ================ */
/* ================================================================================ */
/**
* @brief 12-bit ADC controller ADC0/1 (ADC0)
*/
typedef struct { /*!< ADC0 Structure */
__IO uint32_t CTRL; /*!< A/D Control Register. Contains the clock divide value, enable
bits for each sequence and the A/D power-down bit. */
__IO uint32_t INSEL; /*!< A/D Input Select Register: Selects between external pin and
internal source for various channels */
__IO uint32_t SEQA_CTRL; /*!< A/D Conversion Sequence-A control Register: Controls triggering
and channel selection for conversion sequence-A. Also specifies
interrupt mode for sequence-A. */
__IO uint32_t SEQB_CTRL; /*!< A/D Conversion Sequence-B Control Register: Controls triggering
and channel selection for conversion sequence-B. Also specifies
interrupt mode for sequence-B. */
__IO uint32_t SEQA_GDAT; /*!< A/D Sequence-A Global Data Register. This register contains
the result of the most recent A/D conversion performed under
sequence-A */
__IO uint32_t SEQB_GDAT; /*!< A/D Sequence-B Global Data Register. This register contains
the result of the most recent A/D conversion performed under
sequence-B */
__I uint32_t RESERVED0[2];
__I uint32_t DAT[12]; /*!< A/D Channel 0 Data Register. This register contains the result
of the most recent conversion completed on channel 0. */
__IO uint32_t THR0_LOW; /*!< A/D Low Compare Threshold Register 0 : Contains the lower threshold
level for automatic threshold comparison for any channels linked
to threshold pair 0. */
__IO uint32_t THR1_LOW; /*!< A/D Low Compare Threshold Register 1: Contains the lower threshold
level for automatic threshold comparison for any channels linked
to threshold pair 1. */
__IO uint32_t THR0_HIGH; /*!< A/D High Compare Threshold Register 0: Contains the upper threshold
level for automatic threshold comparison for any channels linked
to threshold pair 0. */
__IO uint32_t THR1_HIGH; /*!< A/D High Compare Threshold Register 1: Contains the upper threshold
level for automatic threshold comparison for any channels linked
to threshold pair 1. */
__I uint32_t CHAN_THRSEL; /*!< A/D Channel-Threshold Select Register. Specifies which set of
threshold compare registers are to be used for each channel */
__IO uint32_t INTEN; /*!< A/D Interrupt Enable Register. This register contains enable
bits that enable the sequence-A, sequence-B, threshold compare
and data overrun interrupts to be generated. */
__I uint32_t FLAGS; /*!< A/D Flags Register. Contains the four interrupt request flags
and the individual component overrun and threshold-compare flags.
(The overrun bits replicate information stored in the result
registers). */
__IO uint32_t TRM; /*!< ADC trim register. */
} LPC_ADC0_Type;
/* ================================================================================ */
/* ================ DAC ================ */
/* ================================================================================ */
/**
* @brief 12-bit DAC Modification (DAC)
*/
typedef struct { /*!< DAC Structure */
__IO uint32_t VAL; /*!< D/A Converter Value Register. This register contains the digital
value to be converted to analog. */
__IO uint32_t CTRL; /*!< DAC Control register. This register contains bits to configure
DAC operation and the interrupt/dma request flag. */
__IO uint32_t CNTVAL; /*!< DAC Counter Value register. This register contains the reload
value for the internal DAC DMA/Interrupt timer. */
} LPC_DAC_Type;
/* ================================================================================ */
/* ================ ACMP ================ */
/* ================================================================================ */
/**
* @brief Analog comparators ACMP0/1/2/3 (ACMP)
*/
typedef struct { /*!< ACMP Structure */
__IO uint32_t CTRL; /*!< Comparator block control register */
__IO uint32_t CMP0; /*!< Comparator 0 source control */
__IO uint32_t CMPFILTR0; /*!< Comparator 0 pin filter set-up */
__IO uint32_t CMP1; /*!< Comparator 1 source control */
__IO uint32_t CMPFILTR1; /*!< Comparator 0 pin filter set-up */
__IO uint32_t CMP2; /*!< Comparator 2 source control */
__IO uint32_t CMPFILTR2; /*!< Comparator 0 pin filter set-up */
__IO uint32_t CMP3; /*!< Comparator 3 source control */
__IO uint32_t CMPFILTR3; /*!< Comparator 0 pin filter set-up */
} LPC_ACMP_Type;
/* ================================================================================ */
/* ================ INMUX ================ */
/* ================================================================================ */
/**
* @brief Input multiplexing (INMUX) (INMUX)
*/
typedef struct { /*!< INMUX Structure */
__IO uint32_t SCT0_INMUX[7]; /*!< Pinmux register for SCT0 input 0 */
__I uint32_t RESERVED0;
__IO uint32_t SCT1_INMUX[7]; /*!< Pinmux register for SCT1 input 0 */
__I uint32_t RESERVED1;
__IO uint32_t SCT2_INMUX[3]; /*!< Pinmux register for SCT2 input 0 */
__I uint32_t RESERVED2[5];
__IO uint32_t SCT3_INMUX[3]; /*!< Pinmux register for SCT3 input 0 */
__I uint32_t RESERVED3[21];
__IO uint32_t PINTSEL[8]; /*!< Pin interrupt select register 0 */
__IO uint32_t DMA_ITRIG_INMUX[18]; /*!< Trigger input for DMA channel 0 select register. */
__I uint32_t RESERVED4[14];
__IO uint32_t FREQMEAS_REF; /*!< Clock selection for frequency measurement function reference
clock */
__IO uint32_t FREQMEAS_TARGET; /*!< Clock selection for frequency measurement function target clock */
} LPC_INMUX_Type;
/* ================================================================================ */
/* ================ RTC ================ */
/* ================================================================================ */
/**
* @brief Real-Time Clock (RTC) (RTC)
*/
typedef struct { /*!< RTC Structure */
__IO uint32_t CTRL; /*!< RTC control register */
__IO uint32_t MATCH; /*!< RTC match register */
__IO uint32_t COUNT; /*!< RTC counter register */
__IO uint32_t WAKE; /*!< RTC high-resolution/wake-up timer control register */
} LPC_RTC_Type;
/* ================================================================================ */
/* ================ WWDT ================ */
/* ================================================================================ */
/**
* @brief Windowed Watchdog Timer (WWDT) (WWDT)
*/
typedef struct { /*!< WWDT Structure */
__IO uint32_t MOD; /*!< Watchdog mode register. This register contains the basic mode
and status of the Watchdog Timer. */
__IO uint32_t TC; /*!< Watchdog timer constant register. This 24-bit register determines
the time-out value. */
__O uint32_t FEED; /*!< Watchdog feed sequence register. Writing 0xAA followed by 0x55
to this register reloads the Watchdog timer with the value contained
in WDTC. */
__I uint32_t TV; /*!< Watchdog timer value register. This 24-bit register reads out
the current value of the Watchdog timer. */
__I uint32_t RESERVED0;
__IO uint32_t WARNINT; /*!< Watchdog Warning Interrupt compare value. */
__IO uint32_t WINDOW; /*!< Watchdog Window compare value. */
} LPC_WWDT_Type;
/* ================================================================================ */
/* ================ SWM ================ */
/* ================================================================================ */
/**
* @brief Switch Matrix (SWM) (SWM)
*/
typedef struct { /*!< SWM Structure */
union {
__IO uint32_t PINASSIGN[16];
struct {
__IO uint32_t PINASSIGN0; /*!< Pin assign register 0. Assign movable functions U0_TXD, U0_RXD,
U0_RTS, U0_CTS. */
__IO uint32_t PINASSIGN1; /*!< Pin assign register 1. Assign movable functions U0_SCLK, U1_TXD,
U1_RXD, U1_RTS. */
__IO uint32_t PINASSIGN2; /*!< Pin assign register 2. Assign movable functions U1_CTS, U1_SCLK,
U2_TXD, U2_RXD. */
__IO uint32_t PINASSIGN3; /*!< Pin assign register 3. Assign movable function . */
__IO uint32_t PINASSIGN4; /*!< Pin assign register 4. Assign movable functions */
__IO uint32_t PINASSIGN5; /*!< Pin assign register 5. Assign movable functions */
__IO uint32_t PINASSIGN6; /*!< Pin assign register 6. Assign movable functions */
__IO uint32_t PINASSIGN7; /*!< Pin assign register 7. Assign movable functions */
__IO uint32_t PINASSIGN8; /*!< Pin assign register 8. Assign movable functions */
__IO uint32_t PINASSIGN9; /*!< Pin assign register 9. Assign movable functions */
__IO uint32_t PINASSIGN10; /*!< Pin assign register 10. Assign movable functions */
__IO uint32_t PINASSIGN11; /*!< Pin assign register 11. Assign movable functions */
__IO uint32_t PINASSIGN12; /*!< Pin assign register 12. Assign movable functions */
__IO uint32_t PINASSIGN13; /*!< Pin assign register 13. Assign movable functions */
__IO uint32_t PINASSIGN14; /*!< Pin assign register 14. Assign movable functions */
__IO uint32_t PINASSIGN15; /*!< Pin assign register 15. Assign movable functions */
};
};
__I uint32_t RESERVED0[96];
__IO uint32_t PINENABLE0; /*!< Pin enable register 0. Enables fixed-pin functions */
__IO uint32_t PINENABLE1; /*!< Pin enable register 0. Enables fixed-pin functions */
} LPC_SWM_Type;
/* ================================================================================ */
/* ================ PMU ================ */
/* ================================================================================ */
/**
* @brief Power Management Unit (PMU) (PMU)
*/
typedef struct { /*!< PMU Structure */
__IO uint32_t PCON; /*!< Power control register */
__IO uint32_t GPREG0; /*!< General purpose register 0 */
__IO uint32_t GPREG1; /*!< General purpose register 0 */
__IO uint32_t GPREG2; /*!< General purpose register 0 */
__IO uint32_t GPREG3; /*!< General purpose register 0 */
__IO uint32_t DPDCTRL; /*!< Deep power-down control register */
} LPC_PMU_Type;
/* ================================================================================ */
/* ================ USART0 ================ */
/* ================================================================================ */
/**
* @brief USART0 (USART0)
*/
typedef struct { /*!< USART0 Structure */
__IO uint32_t CFG; /*!< USART Configuration register. Basic USART configuration settings
that typically are not changed during operation. */
__IO uint32_t CTRL; /*!< USART Control register. USART control settings that are more
likely to change during operation. */
__IO uint32_t STAT; /*!< USART Status register. The complete status value can be read
here. Writing ones clears some bits in the register. Some bits
can be cleared by writing a 1 to them. */
__IO uint32_t INTENSET; /*!< Interrupt Enable read and Set register. Contains an individual
interrupt enable bit for each potential USART interrupt. A complete
value may be read from this register. Writing a 1 to any implemented
bit position causes that bit to be set. */
__O uint32_t INTENCLR; /*!< Interrupt Enable Clear register. Allows clearing any combination
of bits in the INTENSET register. Writing a 1 to any implemented
bit position causes the corresponding bit to be cleared. */
__I uint32_t RXDATA; /*!< Receiver Data register. Contains the last character received. */
__I uint32_t RXDATASTAT; /*!< Receiver Data with Status register. Combines the last character
received with the current USART receive status. Allows DMA or
software to recover incoming data and status together. */
__IO uint32_t TXDATA; /*!< Transmit Data register. Data to be transmitted is written here. */
__IO uint32_t BRG; /*!< Baud Rate Generator register. 16-bit integer baud rate divisor
value. */
__I uint32_t INTSTAT; /*!< Interrupt status register. Reflects interrupts that are currently
enabled. */
} LPC_USART0_Type;
/* ================================================================================ */
/* ================ SPI0 ================ */
/* ================================================================================ */
/**
* @brief SPI0 (SPI0)
*/
typedef struct { /*!< SPI0 Structure */
__IO uint32_t CFG; /*!< SPI Configuration register */
__IO uint32_t DLY; /*!< SPI Delay register */
__IO uint32_t STAT; /*!< SPI Status. Some status flags can be cleared by writing a 1
to that bit position */
__IO uint32_t INTENSET; /*!< SPI Interrupt Enable read and Set. A complete value may be read
from this register. Writing a 1 to any implemented bit position
causes that bit to be set. */
__O uint32_t INTENCLR; /*!< SPI Interrupt Enable Clear. Writing a 1 to any implemented bit
position causes the corresponding bit in INTENSET to be cleared. */
__I uint32_t RXDAT; /*!< SPI Receive Data */
__IO uint32_t TXDATCTL; /*!< SPI Transmit Data with Control */
__IO uint32_t TXDAT; /*!< SPI Transmit Data with Control */
__IO uint32_t TXCTL; /*!< SPI Transmit Control */
__IO uint32_t DIV; /*!< SPI clock Divider */
__I uint32_t INTSTAT; /*!< SPI Interrupt Status */
} LPC_SPI0_Type;
/* ================================================================================ */
/* ================ I2C0 ================ */
/* ================================================================================ */
/**
* @brief I2C-bus interface (I2C0)
*/
typedef struct { /*!< I2C0 Structure */
__IO uint32_t CFG; /*!< Configuration for shared functions. */
__IO uint32_t STAT; /*!< Status register for Master, Slave, and Monitor functions. */
__IO uint32_t INTENSET; /*!< Interrupt Enable Set and read register. */
__O uint32_t INTENCLR; /*!< Interrupt Enable Clear register. */
__IO uint32_t TIMEOUT; /*!< Time-out value register. */
__IO uint32_t DIV; /*!< Clock pre-divider for the entire I2C block. This determines
what time increments are used for the MSTTIME and SLVTIME registers. */
__I uint32_t INTSTAT; /*!< Interrupt Status register for Master, Slave, and Monitor functions. */
__I uint32_t RESERVED0;
__IO uint32_t MSTCTL; /*!< Master control register. */
__IO uint32_t MSTTIME; /*!< Master timing configuration. */
__IO uint32_t MSTDAT; /*!< Combined Master receiver and transmitter data register. */
__I uint32_t RESERVED1[5];
__IO uint32_t SLVCTL; /*!< Slave control register. */
__IO uint32_t SLVDAT; /*!< Combined Slave receiver and transmitter data register. */
__IO uint32_t SLVADR0; /*!< Slave address 0. */
__IO uint32_t SLVADR1; /*!< Slave address 0. */
__IO uint32_t SLVADR2; /*!< Slave address 0. */
__IO uint32_t SLVADR3; /*!< Slave address 0. */
__IO uint32_t SLVQUAL0; /*!< Slave Qualification for address 0. */
__I uint32_t RESERVED2[9];
__I uint32_t MONRXDAT; /*!< Monitor receiver data register. */
} LPC_I2C0_Type;
/* ================================================================================ */
/* ================ QEI ================ */
/* ================================================================================ */
/**
* @brief Quadrature Encoder Interface (QEI) (QEI)
*/
typedef struct { /*!< QEI Structure */
__O uint32_t CON; /*!< Control register */
__I uint32_t STAT; /*!< Encoder status register */
__IO uint32_t CONF; /*!< Configuration register */
__I uint32_t POS; /*!< Position register */
__IO uint32_t MAXPOS; /*!< Maximum position register */
__IO uint32_t CMPOS0; /*!< position compare register 0 */
__IO uint32_t CMPOS1; /*!< position compare register 1 */
__IO uint32_t CMPOS2; /*!< position compare register 2 */
__I uint32_t INXCNT; /*!< Index count register */
__IO uint32_t INXCMP0; /*!< Index compare register 0 */
__IO uint32_t LOAD; /*!< Velocity timer reload register */
__I uint32_t TIME; /*!< Velocity timer register */
__I uint32_t VEL; /*!< Velocity counter register */
__I uint32_t CAP; /*!< Velocity capture register */
__IO uint32_t VELCOMP; /*!< Velocity compare register */
__IO uint32_t FILTERPHA; /*!< Digital filter register on input phase A (QEI_A) */
__IO uint32_t FILTERPHB; /*!< Digital filter register on input phase B (QEI_B) */
__IO uint32_t FILTERINX; /*!< Digital filter register on input index (QEI_IDX) */
__IO uint32_t WINDOW; /*!< Index acceptance window register */
__IO uint32_t INXCMP1; /*!< Index compare register 1 */
__IO uint32_t INXCMP2; /*!< Index compare register 2 */
__I uint32_t RESERVED0[993];
__O uint32_t IEC; /*!< Interrupt enable clear register */
__O uint32_t IES; /*!< Interrupt enable set register */
__I uint32_t INTSTAT; /*!< Interrupt status register */
__O uint32_t IE; /*!< Interrupt enable clear register */
__O uint32_t CLR; /*!< Interrupt status clear register */
__O uint32_t SET; /*!< Interrupt status set register */
} LPC_QEI_Type;
/* ================================================================================ */
/* ================ SYSCON ================ */
/* ================================================================================ */
/**
* @brief System configuration (SYSCON) (SYSCON)
*/
typedef struct { /*!< SYSCON Structure */
__IO uint32_t SYSMEMREMAP; /*!< System memory remap */
__I uint32_t RESERVED0[4];
__IO uint32_t SYSTCKCAL; /*!< System tick counter calibration */
__I uint32_t RESERVED1;
__IO uint32_t NMISRC; /*!< NMI Source Control */
__I uint32_t RESERVED2[8];
__IO uint32_t SYSRSTSTAT; /*!< System reset status register */
__IO uint32_t PRESETCTRL0; /*!< Peripheral reset control 0 */
__IO uint32_t PRESETCTRL1; /*!< Peripheral reset control 1 */
__I uint32_t PIOPORCAP0; /*!< POR captured PIO status 0 */
__I uint32_t PIOPORCAP1; /*!< POR captured PIO status 1 */
__I uint32_t PIOPORCAP2; /*!< POR captured PIO status 2 */
__I uint32_t RESERVED3[10];
__IO uint32_t MAINCLKSELA; /*!< Main clock source select A */
__IO uint32_t MAINCLKSELB; /*!< Main clock source select B */
__IO uint32_t USBCLKSEL; /*!< USB clock source select */
__IO uint32_t ADCASYNCCLKSEL; /*!< ADC asynchronous clock source select */
__I uint32_t RESERVED4;
__IO uint32_t CLKOUTSELA; /*!< CLKOUT clock source select A */
__IO uint32_t CLKOUTSELB; /*!< CLKOUT clock source select B */
__I uint32_t RESERVED5;
__IO uint32_t SYSPLLCLKSEL; /*!< System PLL clock source select */
__IO uint32_t USBPLLCLKSEL; /*!< USB PLL clock source select */
__IO uint32_t SCTPLLCLKSEL; /*!< SCT PLL clock source select */
__I uint32_t RESERVED6[5];
__IO uint32_t SYSAHBCLKDIV; /*!< System clock divider */
__IO uint32_t SYSAHBCLKCTRL0; /*!< System clock control 0 */
__IO uint32_t SYSAHBCLKCTRL1; /*!< System clock control 1 */
__IO uint32_t SYSTICKCLKDIV; /*!< SYSTICK clock divider */
__IO uint32_t UARTCLKDIV; /*!< USART clock divider. Clock divider for the USART fractional
baud rate generator. */
__IO uint32_t IOCONCLKDIV; /*!< Peripheral clock to the IOCON block for programmable glitch
filter */
__IO uint32_t TRACECLKDIV; /*!< ARM trace clock divider */
__I uint32_t RESERVED7[4];
__IO uint32_t USBCLKDIV; /*!< USB clock divider */
__IO uint32_t ADCASYNCCLKDIV; /*!< Asynchronous ADC clock divider */
__I uint32_t RESERVED8;
__IO uint32_t CLKOUTDIV; /*!< CLKOUT clock divider */
__I uint32_t RESERVED9[11];
__IO uint32_t FRGCTRL; /*!< USART fractional baud rate generator control */
__IO uint32_t USBCLKCTRL; /*!< USB clock control */
__IO uint32_t USBCLKST; /*!< USB clock status */
__I uint32_t RESERVED10[19];
__IO uint32_t BODCTRL; /*!< Brown-Out Detect */
__I uint32_t RESERVED11;
__IO uint32_t SYSOSCCTRL; /*!< System oscillator control */
__I uint32_t RESERVED12;
__IO uint32_t RTCOSCCTRL; /*!< RTC oscillator control */
__I uint32_t RESERVED13;
__IO uint32_t SYSPLLCTRL; /*!< System PLL control */
__I uint32_t SYSPLLSTAT; /*!< System PLL status */
__IO uint32_t USBPLLCTRL; /*!< USB PLL control */
__I uint32_t USBPLLSTAT; /*!< USB PLL status */
__IO uint32_t SCTPLLCTRL; /*!< SCT PLL control */
__I uint32_t SCTPLLSTAT; /*!< SCT PLL status */
__I uint32_t RESERVED14[21];
__IO uint32_t PDAWAKECFG; /*!< Power-down states for wake-up from deep-sleep */
__IO uint32_t PDRUNCFG; /*!< Power configuration register */
__I uint32_t RESERVED15[3];
__IO uint32_t STARTERP0; /*!< Start logic 0 wake-up enable register */
__IO uint32_t STARTERP1; /*!< Start logic 1 wake-up enable register */
} LPC_SYSCON_Type;
/* ================================================================================ */
/* ================ MRT ================ */
/* ================================================================================ */
/**
* @brief Multi-Rate Timer (MRT) (MRT)
*/
typedef struct { /*!< MRT Structure */
__IO uint32_t INTVAL0; /*!< MRT0 Time interval value register. This value is loaded into
the TIMER0 register. */
__I uint32_t TIMER0; /*!< MRT0 Timer register. This register reads the value of the down-counter. */
__IO uint32_t CTRL0; /*!< MRT0 Control register. This register controls the MRT0 modes. */
__IO uint32_t STAT0; /*!< MRT0 Status register. */
__IO uint32_t INTVAL1; /*!< MRT0 Time interval value register. This value is loaded into
the TIMER0 register. */
__I uint32_t TIMER1; /*!< MRT0 Timer register. This register reads the value of the down-counter. */
__IO uint32_t CTRL1; /*!< MRT0 Control register. This register controls the MRT0 modes. */
__IO uint32_t STAT1; /*!< MRT0 Status register. */
__IO uint32_t INTVAL2; /*!< MRT0 Time interval value register. This value is loaded into
the TIMER0 register. */
__I uint32_t TIMER2; /*!< MRT0 Timer register. This register reads the value of the down-counter. */
__IO uint32_t CTRL2; /*!< MRT0 Control register. This register controls the MRT0 modes. */
__IO uint32_t STAT2; /*!< MRT0 Status register. */
__IO uint32_t INTVAL3; /*!< MRT0 Time interval value register. This value is loaded into
the TIMER0 register. */
__I uint32_t TIMER3; /*!< MRT0 Timer register. This register reads the value of the down-counter. */
__IO uint32_t CTRL3; /*!< MRT0 Control register. This register controls the MRT0 modes. */
__IO uint32_t STAT3; /*!< MRT0 Status register. */
__I uint32_t RESERVED0[45];
__I uint32_t IDLE_CH; /*!< Idle channel register. This register returns the number of the
first idle channel. */
__IO uint32_t IRQ_FLAG; /*!< Global interrupt flag register */
} LPC_MRT_Type;
/* ================================================================================ */
/* ================ PINT ================ */
/* ================================================================================ */
/**
* @brief Pin interruptand pattern match (PINT) (PINT)
*/
typedef struct { /*!< PINT Structure */
__IO uint32_t ISEL; /*!< Pin Interrupt Mode register */
__IO uint32_t IENR; /*!< Pin interrupt level or rising edge interrupt enable register */
__O uint32_t SIENR; /*!< Pin interrupt level or rising edge interrupt set register */
__O uint32_t CIENR; /*!< Pin interrupt level (rising edge interrupt) clear register */
__IO uint32_t IENF; /*!< Pin interrupt active level or falling edge interrupt enable
register */
__O uint32_t SIENF; /*!< Pin interrupt active level or falling edge interrupt set register */
__O uint32_t CIENF; /*!< Pin interrupt active level or falling edge interrupt clear register */
__IO uint32_t RISE; /*!< Pin interrupt rising edge register */
__IO uint32_t FALL; /*!< Pin interrupt falling edge register */
__IO uint32_t IST; /*!< Pin interrupt status register */
__IO uint32_t PMCTRL; /*!< Pattern match interrupt control register */
__IO uint32_t PMSRC; /*!< Pattern match interrupt bit-slice source register */
__IO uint32_t PMCFG; /*!< Pattern match interrupt bit slice configuration register */
} LPC_PINT_Type;
/* ================================================================================ */
/* ================ GINT0 ================ */
/* ================================================================================ */
/**
* @brief Group interrupt 0/1 (GINT0/1) (GINT0)
*/
typedef struct { /*!< GINT0 Structure */
__IO uint32_t CTRL; /*!< GPIO grouped interrupt control register */
__I uint32_t RESERVED0[7];
__IO uint32_t PORT_POL[3]; /*!< GPIO grouped interrupt port 0 polarity register */
__I uint32_t RESERVED1[5];
__IO uint32_t PORT_ENA[3]; /*!< GPIO grouped interrupt port 0 enable register */
} LPC_GINT0_Type;
/* ================================================================================ */
/* ================ RIT ================ */
/* ================================================================================ */
/**
* @brief Repetitive Interrupt Timer (RIT) (RIT)
*/
typedef struct { /*!< RIT Structure */
__IO uint32_t COMPVAL; /*!< Compare value LSB register. Holds the 32 LSBs of the compare
value. */
__IO uint32_t MASK; /*!< Mask LSB register. This register holds the 32 LSB s of the mask
value. A 1 written to any bit will force a compare on the corresponding
bit of the counter and compare register. */
__IO uint32_t CTRL; /*!< Control register. */
__IO uint32_t COUNTER; /*!< Counter LSB register. 32 LSBs of the counter. */
__IO uint32_t COMPVAL_H; /*!< Compare value MSB register. Holds the 16 MSBs of the compare
value. */
__IO uint32_t MASK_H; /*!< Mask MSB register. This register holds the 16 MSBs of the mask
value. A 1 written to any bit will force a compare on the corresponding
bit of the counter and compare register. */
__I uint32_t RESERVED0;
__IO uint32_t COUNTER_H; /*!< Counter MSB register. 16 MSBs of the counter. */
} LPC_RIT_Type;
/* ================================================================================ */
/* ================ SCTIPU ================ */
/* ================================================================================ */
/**
* @brief SCT Input Processing Unit (IPU) (SCTIPU)
*/
typedef struct { /*!< SCTIPU Structure */
__IO uint32_t SAMPLE_CTRL; /*!< SCT IPU sample control register. Contains the input mux selects,
latch/sample-enable mux selects, and sample overrride bits for
the SAMPLE module. */
__I uint32_t RESERVED0[7];
__IO uint32_t ABORT_ENABLE0; /*!< SCT IPU abort enable register: Selects which input source contributes
to ORed Abort Output 0. */
__IO uint32_t ABORT_SOURCE0; /*!< SCT IPU abort source register: Status register indicating which
input source caused abort output 0. */
__I uint32_t RESERVED1[6];
__IO uint32_t ABORT_ENABLE1; /*!< SCT IPU abort enable register: Selects which input source contributes
to ORed Abort Output 0. */
__IO uint32_t ABORT_SOURCE1; /*!< SCT IPU abort source register: Status register indicating which
input source caused abort output 0. */
__I uint32_t RESERVED2[6];
__IO uint32_t ABORT_ENABLE2; /*!< SCT IPU abort enable register: Selects which input source contributes
to ORed Abort Output 0. */
__IO uint32_t ABORT_SOURCE2; /*!< SCT IPU abort source register: Status register indicating which
input source caused abort output 0. */
__I uint32_t RESERVED3[6];
__IO uint32_t ABORT_ENABLE3; /*!< SCT IPU abort enable register: Selects which input source contributes
to ORed Abort Output 0. */
__IO uint32_t ABORT_SOURCE3; /*!< SCT IPU abort source register: Status register indicating which
input source caused abort output 0. */
} LPC_SCTIPU_Type;
/* ================================================================================ */
/* ================ FLASHCTRL ================ */
/* ================================================================================ */
/**
* @brief Flash controller (FLASHCTRL)
*/
typedef struct { /*!< FLASHCTRL Structure */
__I uint32_t RESERVED0[8];
__IO uint32_t FMSSTART; /*!< Signature start address register */
__IO uint32_t FMSSTOP; /*!< Signature stop-address register */
__I uint32_t RESERVED1;
__I uint32_t FMSW0; /*!< Signature word */
} LPC_FLASHCTRL_Type;
/* ================================================================================ */
/* ================ C_CAN0 ================ */
/* ================================================================================ */
/**
* @brief Controller Area Network C_CAN0 (C_CAN0)
*/
typedef struct { /*!< C_CAN0 Structure */
__IO uint32_t CANCNTL; /*!< CAN control */
__IO uint32_t CANSTAT; /*!< Status register */
__I uint32_t CANEC; /*!< Error counter */
__IO uint32_t CANBT; /*!< Bit timing register */
__I uint32_t CANINT; /*!< Interrupt register */
__IO uint32_t CANTEST; /*!< Test register */
__IO uint32_t CANBRPE; /*!< Baud rate prescaler extension register */
__I uint32_t RESERVED0;
__IO uint32_t CANIF1_CMDREQ; /*!< Message interface 1 command request */
union {
__IO uint32_t CANIF1_CMDMSK_R; /*!< Message interface 1 command mask (read direction) */
__IO uint32_t CANIF1_CMDMSK_W; /*!< Message interface 1 command mask (write direction) */
};
__IO uint32_t CANIF1_MSK1; /*!< Message interface 1 mask 1 */
__IO uint32_t CANIF1_MSK2; /*!< Message interface 1 mask 2 */
__IO uint32_t CANIF1_ARB1; /*!< Message interface 1 arbitration 1 */
__IO uint32_t CANIF1_ARB2; /*!< Message interface 1 arbitration 2 */
__IO uint32_t CANIF1_MCTRL; /*!< Message interface 1 message control */
__IO uint32_t CANIF1_DA1; /*!< Message interface 1 data A1 */
__IO uint32_t CANIF1_DA2; /*!< Message interface 1 data A2 */
__IO uint32_t CANIF1_DB1; /*!< Message interface 1 data B1 */
__IO uint32_t CANIF1_DB2; /*!< Message interface 1 data B2 */
__I uint32_t RESERVED1[13];
__IO uint32_t CANIF2_CMDREQ; /*!< Message interface 1 command request */
union {
__IO uint32_t CANIF2_CMDMSK_W; /*!< Message interface 1 command mask (write direction) */
__IO uint32_t CANIF2_CMDMSK_R; /*!< Message interface 1 command mask (read direction) */
};
__IO uint32_t CANIF2_MSK1; /*!< Message interface 1 mask 1 */
__IO uint32_t CANIF2_MSK2; /*!< Message interface 1 mask 2 */
__IO uint32_t CANIF2_ARB1; /*!< Message interface 1 arbitration 1 */
__IO uint32_t CANIF2_ARB2; /*!< Message interface 1 arbitration 2 */
__IO uint32_t CANIF2_MCTRL; /*!< Message interface 1 message control */
__IO uint32_t CANIF2_DA1; /*!< Message interface 2 data A1 */
__IO uint32_t CANIF2_DA2; /*!< Message interface 2 data A2 */
__IO uint32_t CANIF2_DB1; /*!< Message interface 2 data B1 */
__IO uint32_t CANIF2_DB2; /*!< Message interface 2 data B2 */
__I uint32_t RESERVED2[21];
__I uint32_t CANTXREQ1; /*!< Transmission request 1 */
__I uint32_t CANTXREQ2; /*!< Transmission request 2 */
__I uint32_t RESERVED3[6];
__I uint32_t CANND1; /*!< New data 1 */
__I uint32_t CANND2; /*!< New data 2 */
__I uint32_t RESERVED4[6];
__I uint32_t CANIR1; /*!< Interrupt pending 1 */
__I uint32_t CANIR2; /*!< Interrupt pending 2 */
__I uint32_t RESERVED5[6];
__I uint32_t CANMSGV1; /*!< Message valid 1 */
__I uint32_t CANMSGV2; /*!< Message valid 2 */
__I uint32_t RESERVED6[6];
__IO uint32_t CANCLKDIV; /*!< Can clock divider register */
} LPC_C_CAN0_Type;
/* ================================================================================ */
/* ================ IOCON ================ */
/* ================================================================================ */
/**
* @brief I/O pin configuration (IOCON) (IOCON)
*/
typedef struct { /*!< IOCON Structure */
__IO uint32_t PIO0_0; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_1; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_2; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_3; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_4; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_5; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_6; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_7; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_8; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_9; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_10; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_11; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_12; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_13; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_14; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_15; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_16; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_17; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_18; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_19; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_20; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_21; /*!< Digital I/O control for port 0 pins PIO0_0 to PIO0_21. */
__IO uint32_t PIO0_22; /*!< I/O control for open-drain pin PIO0_22. This pin is used for
the I2C-bus SCL function. */
__IO uint32_t PIO0_23; /*!< I/O control for open-drain pin PIO0_22. This pin is used for
the I2C-bus SCL function. */
__IO uint32_t PIO0_24; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_25; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_26; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_27; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_28; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_29; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_30; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO0_31; /*!< Digital I/O control for port 0 pins PIO0_24 to PIO0_31. */
__IO uint32_t PIO1_0; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_1; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_2; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_3; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_4; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_5; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_6; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_7; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_8; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_9; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_10; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_11; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_12; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_13; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_14; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_15; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_16; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_17; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_18; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_19; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_20; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_21; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_22; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_23; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_24; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_25; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_26; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_27; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_28; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_29; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_30; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO1_31; /*!< Digital I/O control for port 1 pins PIO1_24 to PIO1_31. */
__IO uint32_t PIO2_0; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_1; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_2; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_3; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_4; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_5; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_6; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_7; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_8; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_9; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_10; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
__IO uint32_t PIO2_11; /*!< Digital I/O control for port 2 pins PIO2_0 to PIO2_11. */
} LPC_IOCON_Type;
/* -------------------- End of section using anonymous unions ------------------- */
#if defined(__CC_ARM)
#pragma pop
#elif defined(__ICCARM__)
/* leave anonymous unions enabled */
#elif defined(__GNUC__)
/* anonymous unions are enabled by default */
#elif defined(__TMS470__)
/* anonymous unions are enabled by default */
#elif defined(__TASKING__)
#pragma warning restore
#else
#warning Not supported compiler type
#endif
/* ================================================================================ */
/* ================ Peripheral memory map ================ */
/* ================================================================================ */
#define LPC_GPIO_PORT_BASE 0x1C000000UL
#define LPC_DMA_BASE 0x1C004000UL
#define LPC_USB_BASE 0x1C00C000UL
#define LPC_CRC_BASE 0x1C010000UL
#define LPC_SCT0_BASE 0x1C018000UL
#define LPC_SCT1_BASE 0x1C01C000UL
#define LPC_SCT2_BASE 0x1C020000UL
#define LPC_SCT3_BASE 0x1C024000UL
#define LPC_ADC0_BASE 0x40000000UL
#define LPC_DAC_BASE 0x40004000UL
#define LPC_ACMP_BASE 0x40008000UL
#define LPC_INMUX_BASE 0x40014000UL
#define LPC_RTC_BASE 0x40028000UL
#define LPC_WWDT_BASE 0x4002C000UL
#define LPC_SWM_BASE 0x40038000UL
#define LPC_PMU_BASE 0x4003C000UL
#define LPC_USART0_BASE 0x40040000UL
#define LPC_USART1_BASE 0x40044000UL
#define LPC_SPI0_BASE 0x40048000UL
#define LPC_SPI1_BASE 0x4004C000UL
#define LPC_I2C0_BASE 0x40050000UL
#define LPC_QEI_BASE 0x40058000UL
#define LPC_SYSCON_BASE 0x40074000UL
#define LPC_ADC1_BASE 0x40080000UL
#define LPC_MRT_BASE 0x400A0000UL
#define LPC_PINT_BASE 0x400A4000UL
#define LPC_GINT0_BASE 0x400A8000UL
#define LPC_GINT1_BASE 0x400AC000UL
#define LPC_RIT_BASE 0x400B4000UL
#define LPC_SCTIPU_BASE 0x400B8000UL
#define LPC_FLASHCTRL_BASE 0x400BC000UL
#define LPC_USART2_BASE 0x400C0000UL
#define LPC_C_CAN0_BASE 0x400F0000UL
#define LPC_IOCON_BASE 0x400F8000UL
/* ================================================================================ */
/* ================ Peripheral declaration ================ */
/* ================================================================================ */
#define LPC_GPIO_PORT ((LPC_GPIO_PORT_Type *) LPC_GPIO_PORT_BASE)
#define LPC_DMA ((LPC_DMA_Type *) LPC_DMA_BASE)
#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
#define LPC_CRC ((LPC_CRC_Type *) LPC_CRC_BASE)
#define LPC_SCT0 ((LPC_SCT0_Type *) LPC_SCT0_BASE)
#define LPC_SCT1 ((LPC_SCT0_Type *) LPC_SCT1_BASE)
#define LPC_SCT2 ((LPC_SCT2_Type *) LPC_SCT2_BASE)
#define LPC_SCT3 ((LPC_SCT2_Type *) LPC_SCT3_BASE)
#define LPC_ADC0 ((LPC_ADC0_Type *) LPC_ADC0_BASE)
#define LPC_DAC ((LPC_DAC_Type *) LPC_DAC_BASE)
#define LPC_ACMP ((LPC_ACMP_Type *) LPC_ACMP_BASE)
#define LPC_INMUX ((LPC_INMUX_Type *) LPC_INMUX_BASE)
#define LPC_RTC ((LPC_RTC_Type *) LPC_RTC_BASE)
#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
#define LPC_SWM ((LPC_SWM_Type *) LPC_SWM_BASE)
#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
#define LPC_USART0 ((LPC_USART0_Type *) LPC_USART0_BASE)
#define LPC_USART1 ((LPC_USART0_Type *) LPC_USART1_BASE)
#define LPC_SPI0 ((LPC_SPI0_Type *) LPC_SPI0_BASE)
#define LPC_SPI1 ((LPC_SPI0_Type *) LPC_SPI1_BASE)
#define LPC_I2C0 ((LPC_I2C0_Type *) LPC_I2C0_BASE)
#define LPC_QEI ((LPC_QEI_Type *) LPC_QEI_BASE)
#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
#define LPC_ADC1 ((LPC_ADC0_Type *) LPC_ADC1_BASE)
#define LPC_MRT ((LPC_MRT_Type *) LPC_MRT_BASE)
#define LPC_PINT ((LPC_PINT_Type *) LPC_PINT_BASE)
#define LPC_GINT0 ((LPC_GINT0_Type *) LPC_GINT0_BASE)
#define LPC_GINT1 ((LPC_GINT0_Type *) LPC_GINT1_BASE)
#define LPC_RIT ((LPC_RIT_Type *) LPC_RIT_BASE)
#define LPC_SCTIPU ((LPC_SCTIPU_Type *) LPC_SCTIPU_BASE)
#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
#define LPC_USART2 ((LPC_USART0_Type *) LPC_USART2_BASE)
#define LPC_C_CAN0 ((LPC_C_CAN0_Type *) LPC_C_CAN0_BASE)
#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
/** @} */ /* End of group Device_Peripheral_Registers */
/** @} */ /* End of group LPC15xx */
/** @} */ /* End of group (null) */
#ifdef __cplusplus
}
#endif
#endif /* LPC15XX_H */