File content as of revision 164:289d4deac6e4:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

#define GPIO_PORT_SHIFT 12

typedef enum {
    PTA0  = (0 << GPIO_PORT_SHIFT | 0),
    PTA1  = (0 << GPIO_PORT_SHIFT | 1),
    PTA2  = (0 << GPIO_PORT_SHIFT | 2),
    PTA3  = (0 << GPIO_PORT_SHIFT | 3),
    PTA4  = (0 << GPIO_PORT_SHIFT | 4),
    PTA5  = (0 << GPIO_PORT_SHIFT | 5),
    PTA10 = (0 << GPIO_PORT_SHIFT | 10),
    PTA11 = (0 << GPIO_PORT_SHIFT | 11),
    PTA12 = (0 << GPIO_PORT_SHIFT | 12),
    PTA13 = (0 << GPIO_PORT_SHIFT | 13),
    PTA14 = (0 << GPIO_PORT_SHIFT | 14),
    PTA15 = (0 << GPIO_PORT_SHIFT | 15),
    PTA16 = (0 << GPIO_PORT_SHIFT | 16),
    PTA17 = (0 << GPIO_PORT_SHIFT | 17),
    PTA18 = (0 << GPIO_PORT_SHIFT | 18),
    PTA19 = (0 << GPIO_PORT_SHIFT | 19),

    PTB0  = (1 << GPIO_PORT_SHIFT | 0),
    PTB1  = (1 << GPIO_PORT_SHIFT | 1),
    PTB2  = (1 << GPIO_PORT_SHIFT | 2),
    PTB3  = (1 << GPIO_PORT_SHIFT | 3),
    PTB9  = (1 << GPIO_PORT_SHIFT | 9),
    PTB10 = (1 << GPIO_PORT_SHIFT | 10),
    PTB11 = (1 << GPIO_PORT_SHIFT | 11),
    PTB16 = (1 << GPIO_PORT_SHIFT | 16),
    PTB17 = (1 << GPIO_PORT_SHIFT | 17),
    PTB18 = (1 << GPIO_PORT_SHIFT | 18),
    PTB19 = (1 << GPIO_PORT_SHIFT | 19),
    PTB20 = (1 << GPIO_PORT_SHIFT | 20),
    PTB21 = (1 << GPIO_PORT_SHIFT | 21),
    PTB22 = (1 << GPIO_PORT_SHIFT | 22),
    PTB23 = (1 << GPIO_PORT_SHIFT | 23),

    PTC0  = (2 << GPIO_PORT_SHIFT | 0 ),
    PTC1  = (2 << GPIO_PORT_SHIFT | 1 ),
    PTC2  = (2 << GPIO_PORT_SHIFT | 2 ),
    PTC3  = (2 << GPIO_PORT_SHIFT | 3 ),
    PTC4  = (2 << GPIO_PORT_SHIFT | 4 ),
    PTC5  = (2 << GPIO_PORT_SHIFT | 5 ),
    PTC6  = (2 << GPIO_PORT_SHIFT | 6 ),
    PTC7  = (2 << GPIO_PORT_SHIFT | 7 ),
    PTC8  = (2 << GPIO_PORT_SHIFT | 8 ),
    PTC9  = (2 << GPIO_PORT_SHIFT | 9 ),
    PTC10 = (2 << GPIO_PORT_SHIFT | 10),
    PTC11 = (2 << GPIO_PORT_SHIFT | 11),
    PTC12 = (2 << GPIO_PORT_SHIFT | 12),
    PTC13 = (2 << GPIO_PORT_SHIFT | 13),
    PTC14 = (2 << GPIO_PORT_SHIFT | 14),
    PTC15 = (2 << GPIO_PORT_SHIFT | 15),
    PTC17 = (2 << GPIO_PORT_SHIFT | 17),

    PTD0  = (3 << GPIO_PORT_SHIFT | 0),
    PTD1  = (3 << GPIO_PORT_SHIFT | 1),
    PTD2  = (3 << GPIO_PORT_SHIFT | 2),
    PTD3  = (3 << GPIO_PORT_SHIFT | 3),
    PTD4  = (3 << GPIO_PORT_SHIFT | 4),
    PTD5  = (3 << GPIO_PORT_SHIFT | 5),
    PTD6  = (3 << GPIO_PORT_SHIFT | 6),
    PTD7  = (3 << GPIO_PORT_SHIFT | 7),
    PTD8  = (3 << GPIO_PORT_SHIFT | 8),
    PTD9  = (3 << GPIO_PORT_SHIFT | 9),

    PTE0  = (4 << GPIO_PORT_SHIFT | 0),
    PTE1  = (4 << GPIO_PORT_SHIFT | 1),
    PTE2  = (4 << GPIO_PORT_SHIFT | 2),
    PTE3  = (4 << GPIO_PORT_SHIFT | 3),
    PTE4  = (4 << GPIO_PORT_SHIFT | 4),
    PTE5  = (4 << GPIO_PORT_SHIFT | 5),
    PTE6  = (4 << GPIO_PORT_SHIFT | 6),
    PTE7  = (4 << GPIO_PORT_SHIFT | 7),
    PTE8  = (4 << GPIO_PORT_SHIFT | 9),
    PTE9  = (4 << GPIO_PORT_SHIFT | 9),
    PTE10 = (4 << GPIO_PORT_SHIFT | 10),
    PTE11 = (4 << GPIO_PORT_SHIFT | 11),

    LED_RED   = PTC1,
    LED_GREEN = PTC2,
    LED_BLUE  = PTC0,

    // mbed original LED naming
    LED1 = LED_RED,
    LED2 = LED_GREEN,
    LED3 = LED_BLUE,
    LED4 = LED_RED,

    //Push buttons
    SW2 = PTA4,
    SW3 = PTD0,
    // Standardized button names
    BUTTON1 = SW2,
    BUTTON2 = SW3,

    // USB Pins
    USBTX = PTB17,
    USBRX = PTB16,

    DAC0_OUT = 0xFEFE, /* DAC does not have Pin Name in RM */

    // Arduino Headers
    D0 = PTB16,
    D1 = PTB17,
    D2 = PTD7,
    D3 = PTC1,
    D4 = PTC12,
    D5 = PTC2,
    D6 = PTC3,
    D7 = PTC9,
    D8 = PTD4,
    D9 = PTD5,
    D10 = PTC4,
    D11 = PTC6,
    D12 = PTC7,
    D13 = PTC5,
    D14 = PTC11,
    D15 = PTC10,

    I2C_SCL = D15,
    I2C_SDA = D14,

    A0 = DAC0_OUT,
    A1 = PTD1,
    A2 = PTC0,
    A3 = PTD6,
    A4 = PTB1,
    A5 = PTB0,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

typedef enum {
    PullNone = 0,
    PullDown = 1,
    PullUp   = 2,
    PullDefault = PullUp
} PinMode;

#ifdef __cplusplus
}
#endif

#endif