mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
- Child:
- 148:21d94c44109e
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,183 +1,194 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM -#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0))) -#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) -#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) -#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) -#define STM_MODE_INPUT (0) -#define STM_MODE_OUTPUT_PP (1) -#define STM_MODE_OUTPUT_OD (2) -#define STM_MODE_AF_PP (3) -#define STM_MODE_AF_OD (4) -#define STM_MODE_ANALOG (5) -#define STM_MODE_IT_RISING (6) -#define STM_MODE_IT_FALLING (7) -#define STM_MODE_IT_RISING_FALLING (8) -#define STM_MODE_EVT_RISING (9) -#define STM_MODE_EVT_FALLING (10) -#define STM_MODE_EVT_RISING_FALLING (11) -#define STM_MODE_IT_EVT_RESET (12) - -// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) -// Low nibble = pin number -#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) -#define STM_PIN(X) ((uint32_t)(X) & 0xF) - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - -typedef enum { - PA_0 = 0x00, - PA_1 = 0x01, - PA_2 = 0x02, - PA_3 = 0x03, - PA_4 = 0x04, - PA_5 = 0x05, - PA_6 = 0x06, - PA_7 = 0x07, - PA_8 = 0x08, - PA_9 = 0x09, - PA_10 = 0x0A, - PA_11 = 0x0B, - PA_12 = 0x0C, - PA_13 = 0x0D, - PA_14 = 0x0E, - PA_15 = 0x0F, - - PB_0 = 0x10, - PB_1 = 0x11, - PB_2 = 0x12, - PB_3 = 0x13, - PB_4 = 0x14, - PB_5 = 0x15, - PB_6 = 0x16, - PB_7 = 0x17, - PB_8 = 0x18, - PB_9 = 0x19, - PB_10 = 0x1A, - PB_11 = 0x1B, - PB_12 = 0x1C, - PB_13 = 0x1D, - PB_14 = 0x1E, - PB_15 = 0x1F, - - PC_0 = 0x20, - PC_1 = 0x21, - PC_2 = 0x22, - PC_3 = 0x23, - PC_4 = 0x24, - PC_5 = 0x25, - PC_6 = 0x26, - PC_7 = 0x27, - PC_8 = 0x28, - PC_9 = 0x29, - PC_10 = 0x2A, - PC_11 = 0x2B, - PC_12 = 0x2C, - PC_13 = 0x2D, - PC_14 = 0x2E, - PC_15 = 0x2F, - - PD_2 = 0x32, - - PF_0 = 0x50, - PF_1 = 0x51, - - // Arduino connector namings - A0 = PA_0, - A1 = PA_1, - A2 = PA_4, - A3 = PB_0, - A4 = PC_1, - A5 = PC_0, - D0 = PA_3, - D1 = PA_2, - D2 = PA_10, - D3 = PB_3, - D4 = PB_5, - D5 = PB_4, - D6 = PB_10, - D7 = PA_8, - D8 = PA_9, - D9 = PC_7, - D10 = PB_6, - D11 = PA_7, - D12 = PA_6, - D13 = PA_5, - D14 = PB_9, - D15 = PB_8, - - // Generic signals namings - LED1 = PA_5, - LED2 = PA_5, - LED3 = PA_5, - LED4 = PA_5, - USER_BUTTON = PC_13, - SERIAL_TX = PA_2, - SERIAL_RX = PA_3, - USBTX = PA_2, - USBRX = PA_3, - I2C_SCL = PB_8, - I2C_SDA = PB_9, - SPI_MOSI = PA_7, - SPI_MISO = PA_6, - SPI_SCK = PA_5, - SPI_CS = PB_6, - PWM_OUT = PB_3, - - // Not connected - NC = (int)0xFFFFFFFF -} PinName; - -typedef enum { - PullNone = 0, - PullUp = 1, - PullDown = 2, - OpenDrain = 3, - PullDefault = PullNone -} PinMode; - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7))) + +#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7) |\ + ((CHANNEL & 0x0F) << 11) |\ + ((INVERTED & 0x01) << 15))) + +#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) +#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) +#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) +#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) +#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) + +#define STM_MODE_INPUT (0) +#define STM_MODE_OUTPUT_PP (1) +#define STM_MODE_OUTPUT_OD (2) +#define STM_MODE_AF_PP (3) +#define STM_MODE_AF_OD (4) +#define STM_MODE_ANALOG (5) +#define STM_MODE_IT_RISING (6) +#define STM_MODE_IT_FALLING (7) +#define STM_MODE_IT_RISING_FALLING (8) +#define STM_MODE_EVT_RISING (9) +#define STM_MODE_EVT_FALLING (10) +#define STM_MODE_EVT_RISING_FALLING (11) +#define STM_MODE_IT_EVT_RESET (12) + +// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) +// Low nibble = pin number +#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) +#define STM_PIN(X) ((uint32_t)(X) & 0xF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PF_0 = 0x50, + PF_1 = 0x51, + + // Arduino connector namings + A0 = PA_0, + A1 = PA_1, + A2 = PA_4, + A3 = PB_0, + A4 = PC_1, + A5 = PC_0, + D0 = PA_3, + D1 = PA_2, + D2 = PA_10, + D3 = PB_3, + D4 = PB_5, + D5 = PB_4, + D6 = PB_10, + D7 = PA_8, + D8 = PA_9, + D9 = PC_7, + D10 = PB_6, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + // Generic signals namings + LED1 = PA_5, + LED2 = PA_5, + LED3 = PA_5, + LED4 = PA_5, + USER_BUTTON = PC_13, + SERIAL_TX = PA_2, + SERIAL_RX = PA_3, + USBTX = PA_2, + USBRX = PA_3, + I2C_SCL = PB_8, + I2C_SDA = PB_9, + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_CS = PB_6, + PWM_OUT = PB_3, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3, + PullDefault = PullNone +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif