Diff: targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/PeripheralPins.c

Revision:

181:57724642e740

Parent:

163:74e0ce7f98e8

Child:

186:707f6e361f3e

--- a/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/PeripheralPins.c	Wed Jan 17 15:23:54 2018 +0000
+++ b/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/PeripheralPins.c	Fri Feb 16 16:09:33 2018 +0000
@@ -29,6 +29,7 @@
  */
 
 #include "PeripheralPins.h"
+#include "mbed_toolchain.h"
 
 // =====
 // Note: Commented lines are alternative possibilities which are not used per default.
@@ -38,7 +39,7 @@
 
 //*** ADC ***
 
-const PinMap PinMap_ADC[] = {
+MBED_WEAK const PinMap PinMap_ADC[] = {
     {PA_0,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0,  5, 0)}, // IN5 - ARDUINO A0
     {PA_1,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0,  6, 0)}, // IN6 - ARDUINO A1
 //  {PA_2,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0,  7, 0)}, // IN7 // PA_2 is used as SERIAL_TX
@@ -58,7 +59,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_ADC_Internal[] = {
+MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
     {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
     {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,  0, 0)},
     {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
@@ -67,7 +68,7 @@
 
 //*** DAC ***
 
-const PinMap PinMap_DAC[] = {
+MBED_WEAK const PinMap PinMap_DAC[] = {
     {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // OUT1
     {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // OUT2 (Warning: LED1 is also on this pin)
     {NC,   NC,    0}
@@ -75,7 +76,7 @@
 
 //*** I2C ***
 
-const PinMap PinMap_I2C_SDA[] = {
+MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
     {PB_7,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
     {PB_9,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
     {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
@@ -84,7 +85,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_I2C_SCL[] = {
+MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
     {PB_6,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
     {PB_8,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
     {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
@@ -96,7 +97,7 @@
 //*** PWM ***
 
 // Warning: TIM5 cannot be used because already used by the us_ticker.
-const PinMap PinMap_PWM[] = {
+MBED_WEAK const PinMap PinMap_PWM[] = {
     {PA_0,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)},  // TIM2_CH1
 //  {PA_0,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)},  // TIM5_CH1 (used by us_ticker)
     {PA_1,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)},  // TIM2_CH2
@@ -161,7 +162,7 @@
 
 //*** SERIAL ***
 
-const PinMap PinMap_UART_TX[] = {
+MBED_WEAK const PinMap PinMap_UART_TX[] = {
     {PA_0,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
     {PA_2,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // SERIAL_TX
     {PA_9,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
@@ -176,7 +177,7 @@
     {NC,    NC,     0}
 };
 
-const PinMap PinMap_UART_RX[] = {
+MBED_WEAK const PinMap PinMap_UART_RX[] = {
     {PA_1,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
     {PA_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // SERIAL_RX
     {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
@@ -191,7 +192,7 @@
     {NC,    NC,     0}
 };
 
-const PinMap PinMap_UART_RTS[] = {
+MBED_WEAK const PinMap PinMap_UART_RTS[] = {
     {PA_1,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
     {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
 //  {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
@@ -202,7 +203,7 @@
     {NC,    NC,     0}
 };
  
-const PinMap PinMap_UART_CTS[] = {
+MBED_WEAK const PinMap PinMap_UART_CTS[] = {
     {PA_0,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
     {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
 //  {PB_0,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
@@ -215,7 +216,7 @@
 
 //*** SPI ***
 
-const PinMap PinMap_SPI_MOSI[] = {
+MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
     {PA_7,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11
     {PB_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
     {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
@@ -224,7 +225,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_MISO[] = {
+MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
     {PA_6,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12
     {PB_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
     {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
@@ -233,7 +234,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_SCLK[] = {
+MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
     {PA_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13
     {PB_3,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
     {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
@@ -242,7 +243,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_SSEL[] = {
+MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
     {PA_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
 //  {PA_4,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
     {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
@@ -252,13 +253,13 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_CAN_RD[] = {
+MBED_WEAK const PinMap PinMap_CAN_RD[] = {
     {PB_8 , CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
     {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_CAN_TD[] = {
+MBED_WEAK const PinMap PinMap_CAN_TD[] = {
     {PB_9 ,  CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
     {PA_12,  CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
     {NC,    NC,    0}