Diff: targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_UBLOX_EVK_NINA_B1/PinNames.h

Revision:

154:37f96f9d4de2

Child:

169:e3b6fe271b81

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_UBLOX_EVK_NINA_B1/PinNames.h	Wed Jan 04 16:58:05 2017 +0000
@@ -0,0 +1,127 @@
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+    // nRF52 pin names
+    p0 = 0,
+    p1 = 1,
+    p2 = 2,
+    p3 = 3,
+    p4 = 4,
+    p5 = 5,
+    p6 = 6,
+    p7 = 7,
+    p8 = 8,
+    p9 = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,
+    p31 = 31,
+    NC = (int)0xFFFFFFFF, // Not connected
+    
+    //NINA-B1 module pin names
+    NINA_B1_GPIO_1 = p8,
+    NINA_B1_GPIO_2 = p11,
+    NINA_B1_GPIO_3 = p12,
+    NINA_B1_GPIO_4 = p13,
+    NINA_B1_GPIO_5 = p14,
+    NINA_B1_GPIO_7 = p16,
+    NINA_B1_GPIO_8 = p18,
+
+    NINA_B1_GPIO_16 = p28,
+    NINA_B1_GPIO_17 = p29,
+    NINA_B1_GPIO_18 = p30,
+
+    NINA_B1_GPIO_20 = p31,
+    NINA_B1_GPIO_21 = p7,
+    NINA_B1_GPIO_22 = p6,
+    NINA_B1_GPIO_23 = p5,
+    NINA_B1_GPIO_24 = p2,
+    NINA_B1_GPIO_25 = p3,
+    NINA_B1_GPIO_27 = p4,
+    NINA_B1_GPIO_28 = p9,
+    NINA_B1_GPIO_29 = p10,
+     
+    // EVK-NINA-B1 board
+    LED1 = NINA_B1_GPIO_1, // Red
+    LED2 = NINA_B1_GPIO_7, // Green/SW1
+    LED3 = NINA_B1_GPIO_8, // Blue
+    LED4 = NC,
+    SW1 = NINA_B1_GPIO_7,
+    SW2 = NINA_B1_GPIO_18,
+    D0 = NINA_B1_GPIO_23,
+    D1 = NINA_B1_GPIO_22,
+    D2 = NINA_B1_GPIO_21,
+    D3 = NINA_B1_GPIO_20,
+    D4 = NINA_B1_GPIO_8,
+    D5 = NC, // SWDIO
+    D6 = NINA_B1_GPIO_28,
+    D7 = NINA_B1_GPIO_29,
+    D8 = NC, // SWDCLK
+    D9 = NINA_B1_GPIO_1,
+    D10 = NINA_B1_GPIO_2,
+    D11 = NINA_B1_GPIO_4,
+    D12 = NINA_B1_GPIO_3,
+    D13 = NINA_B1_GPIO_5,
+    D14 = NINA_B1_GPIO_24,
+    D15 = NINA_B1_GPIO_25,
+    A0 = NINA_B1_GPIO_25,
+    A1 = NINA_B1_GPIO_24,
+    A2 = NINA_B1_GPIO_27,
+    A3 = NINA_B1_GPIO_18,
+    A4 = NINA_B1_GPIO_17,
+    A5 = NINA_B1_GPIO_16,
+    // Nordic SDK pin names
+    RX_PIN_NUMBER = p5,
+    TX_PIN_NUMBER = p6,
+    CTS_PIN_NUMBER = p7,
+    RTS_PIN_NUMBER = p31,
+    I2C_SDA0 = p2,
+    I2C_SCL0 = p3,
+    // mBed interface pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+#endif