mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F1/device/stm32f1xx_hal_conf.h@189:f392fc9709a3, 2019-02-20 (annotated)

Committer:
AnnaBridge
Date:
Wed Feb 20 22:31:08 2019 +0000
Revision:
189:f392fc9709a3
Parent:
187:0387e8f68319 
mbed library release version 165

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /**
<> 144:ef7eb2e8f9f7 2 ******************************************************************************
<> 144:ef7eb2e8f9f7 3 * @file stm32f1xx_hal_conf.h
<> 144:ef7eb2e8f9f7 4 * @author MCD Application Team
<> 144:ef7eb2e8f9f7 5 * @brief HAL configuration template file.
<> 144:ef7eb2e8f9f7 6 * This file should be copied to the application folder and renamed
<> 144:ef7eb2e8f9f7 7 * to stm32f1xx_hal_conf.h.
<> 144:ef7eb2e8f9f7 8 ******************************************************************************
<> 144:ef7eb2e8f9f7 9 * @attention
<> 144:ef7eb2e8f9f7 10 *
AnnaBridge 165:e614a9f1c9e2 11 * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
<> 144:ef7eb2e8f9f7 12 *
<> 144:ef7eb2e8f9f7 13 * Redistribution and use in source and binary forms, with or without modification,
<> 144:ef7eb2e8f9f7 14 * are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 15 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 16 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 18 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 19 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 21 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 22 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 23 *
<> 144:ef7eb2e8f9f7 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 34 *
<> 144:ef7eb2e8f9f7 35 ******************************************************************************
AnnaBridge 187:0387e8f68319 36 */
<> 144:ef7eb2e8f9f7 37
<> 144:ef7eb2e8f9f7 38 /* Define to prevent recursive inclusion -------------------------------------*/
<> 144:ef7eb2e8f9f7 39 #ifndef __STM32F1xx_HAL_CONF_H
<> 144:ef7eb2e8f9f7 40 #define __STM32F1xx_HAL_CONF_H
<> 144:ef7eb2e8f9f7 41
<> 144:ef7eb2e8f9f7 42 #ifdef __cplusplus
AnnaBridge 187:0387e8f68319 43 extern "C" {
<> 144:ef7eb2e8f9f7 44 #endif
<> 144:ef7eb2e8f9f7 45
<> 144:ef7eb2e8f9f7 46 /* Exported types ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 47 /* Exported constants --------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 48
<> 144:ef7eb2e8f9f7 49 /* ########################## Module Selection ############################## */
<> 144:ef7eb2e8f9f7 50 /**
AnnaBridge 187:0387e8f68319 51 * @brief This is the list of modules to be used in the HAL driver
<> 144:ef7eb2e8f9f7 52 */
<> 144:ef7eb2e8f9f7 53 #define HAL_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 54 #define HAL_ADC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 55 #define HAL_CAN_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 56 #define HAL_CEC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 57 #define HAL_CORTEX_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 58 #define HAL_CRC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 59 #define HAL_DAC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 60 #define HAL_DMA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 61 #define HAL_ETH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 62 #define HAL_FLASH_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 63 #define HAL_GPIO_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 64 #define HAL_HCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 65 #define HAL_I2C_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 66 #define HAL_I2S_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 67 #define HAL_IRDA_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 68 #define HAL_IWDG_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 69 #define HAL_NAND_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 70 #define HAL_NOR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 71 #define HAL_PCCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 72 #define HAL_PCD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 73 #define HAL_PWR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 74 #define HAL_RCC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 75 #define HAL_RTC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 76 #define HAL_SD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 77 #define HAL_SMARTCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 78 #define HAL_SPI_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 79 #define HAL_SRAM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 80 #define HAL_TIM_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 81 #define HAL_UART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 82 #define HAL_USART_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 83 #define HAL_WWDG_MODULE_ENABLED
AnnaBridge 165:e614a9f1c9e2 84 #define HAL_MMC_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 85
<> 144:ef7eb2e8f9f7 86 /* ########################## Oscillator Values adaptation ####################*/
<> 144:ef7eb2e8f9f7 87 /**
<> 144:ef7eb2e8f9f7 88 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
<> 144:ef7eb2e8f9f7 89 * This value is used by the RCC HAL module to compute the system frequency
AnnaBridge 187:0387e8f68319 90 * (when HSE is used as system clock source, directly or through the PLL).
<> 144:ef7eb2e8f9f7 91 */
AnnaBridge 187:0387e8f68319 92 #if !defined (HSE_VALUE)
<> 144:ef7eb2e8f9f7 93 #if defined(USE_STM3210C_EVAL)
AnnaBridge 187:0387e8f68319 94 #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
<> 144:ef7eb2e8f9f7 95 #else
AnnaBridge 187:0387e8f68319 96 #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
<> 144:ef7eb2e8f9f7 97 #endif
<> 144:ef7eb2e8f9f7 98 #endif /* HSE_VALUE */
<> 144:ef7eb2e8f9f7 99
<> 144:ef7eb2e8f9f7 100 #if !defined (HSE_STARTUP_TIMEOUT)
AnnaBridge 187:0387e8f68319 101 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
<> 144:ef7eb2e8f9f7 102 #endif /* HSE_STARTUP_TIMEOUT */
<> 144:ef7eb2e8f9f7 103
<> 144:ef7eb2e8f9f7 104 /**
<> 144:ef7eb2e8f9f7 105 * @brief Internal High Speed oscillator (HSI) value.
<> 144:ef7eb2e8f9f7 106 * This value is used by the RCC HAL module to compute the system frequency
AnnaBridge 187:0387e8f68319 107 * (when HSI is used as system clock source, directly or through the PLL).
<> 144:ef7eb2e8f9f7 108 */
<> 144:ef7eb2e8f9f7 109 #if !defined (HSI_VALUE)
AnnaBridge 187:0387e8f68319 110 #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
<> 144:ef7eb2e8f9f7 111 #endif /* HSI_VALUE */
<> 144:ef7eb2e8f9f7 112
<> 144:ef7eb2e8f9f7 113 /**
AnnaBridge 165:e614a9f1c9e2 114 * @brief Internal Low Speed oscillator (LSI) value.
AnnaBridge 165:e614a9f1c9e2 115 */
AnnaBridge 187:0387e8f68319 116 #if !defined (LSI_VALUE)
AnnaBridge 187:0387e8f68319 117 #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
AnnaBridge 165:e614a9f1c9e2 118 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
AnnaBridge 165:e614a9f1c9e2 119 The real value may vary depending on the variations
AnnaBridge 165:e614a9f1c9e2 120 in voltage and temperature. */
AnnaBridge 165:e614a9f1c9e2 121 /**
<> 144:ef7eb2e8f9f7 122 * @brief External Low Speed oscillator (LSE) value.
<> 144:ef7eb2e8f9f7 123 * This value is used by the UART, RTC HAL module to compute the system frequency
<> 144:ef7eb2e8f9f7 124 */
<> 144:ef7eb2e8f9f7 125 #if !defined (LSE_VALUE)
AnnaBridge 187:0387e8f68319 126 #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
<> 144:ef7eb2e8f9f7 127 #endif /* LSE_VALUE */
<> 144:ef7eb2e8f9f7 128
<> 144:ef7eb2e8f9f7 129 #if !defined (LSE_STARTUP_TIMEOUT)
AnnaBridge 187:0387e8f68319 130 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
AnnaBridge 165:e614a9f1c9e2 131 #endif /* LSE_STARTUP_TIMEOUT */
<> 144:ef7eb2e8f9f7 132
<> 144:ef7eb2e8f9f7 133 /* Tip: To avoid modifying this file each time you need to use different HSE,
<> 144:ef7eb2e8f9f7 134 === you can define the HSE value in your toolchain compiler preprocessor. */
<> 144:ef7eb2e8f9f7 135
<> 144:ef7eb2e8f9f7 136 /* ########################### System Configuration ######################### */
<> 144:ef7eb2e8f9f7 137 /**
<> 144:ef7eb2e8f9f7 138 * @brief This is the HAL system configuration section
AnnaBridge 187:0387e8f68319 139 */
AnnaBridge 165:e614a9f1c9e2 140 #define VDD_VALUE 3300U /*!< Value of VDD in mv */
AnnaBridge 165:e614a9f1c9e2 141 #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
AnnaBridge 165:e614a9f1c9e2 142 #define USE_RTOS 0U
AnnaBridge 165:e614a9f1c9e2 143 #define PREFETCH_ENABLE 1U
<> 144:ef7eb2e8f9f7 144
<> 144:ef7eb2e8f9f7 145 /* ########################## Assert Selection ############################## */
<> 144:ef7eb2e8f9f7 146 /**
AnnaBridge 187:0387e8f68319 147 * @brief Uncomment the line below to expanse the "assert_param" macro in the
<> 144:ef7eb2e8f9f7 148 * HAL drivers code
<> 144:ef7eb2e8f9f7 149 */
AnnaBridge 165:e614a9f1c9e2 150 /* #define USE_FULL_ASSERT 1U */
<> 144:ef7eb2e8f9f7 151
<> 144:ef7eb2e8f9f7 152 /* ################## Ethernet peripheral configuration ##################### */
<> 144:ef7eb2e8f9f7 153
<> 144:ef7eb2e8f9f7 154 /* Section 1 : Ethernet peripheral configuration */
<> 144:ef7eb2e8f9f7 155
<> 144:ef7eb2e8f9f7 156 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
AnnaBridge 165:e614a9f1c9e2 157 #define MAC_ADDR0 2U
AnnaBridge 165:e614a9f1c9e2 158 #define MAC_ADDR1 0U
AnnaBridge 165:e614a9f1c9e2 159 #define MAC_ADDR2 0U
AnnaBridge 165:e614a9f1c9e2 160 #define MAC_ADDR3 0U
AnnaBridge 165:e614a9f1c9e2 161 #define MAC_ADDR4 0U
AnnaBridge 165:e614a9f1c9e2 162 #define MAC_ADDR5 0U
<> 144:ef7eb2e8f9f7 163
AnnaBridge 187:0387e8f68319 164 /* Definition of the Ethernet driver buffers size and count */
<> 144:ef7eb2e8f9f7 165 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
<> 144:ef7eb2e8f9f7 166 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
AnnaBridge 165:e614a9f1c9e2 167 #define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */
AnnaBridge 165:e614a9f1c9e2 168 #define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
<> 144:ef7eb2e8f9f7 169
<> 144:ef7eb2e8f9f7 170 /* Section 2: PHY configuration section */
<> 144:ef7eb2e8f9f7 171
AnnaBridge 187:0387e8f68319 172 /* DP83848 PHY Address*/
AnnaBridge 165:e614a9f1c9e2 173 #define DP83848_PHY_ADDRESS 0x01U
AnnaBridge 187:0387e8f68319 174 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
AnnaBridge 165:e614a9f1c9e2 175 #define PHY_RESET_DELAY 0x000000FFU
<> 144:ef7eb2e8f9f7 176 /* PHY Configuration delay */
AnnaBridge 165:e614a9f1c9e2 177 #define PHY_CONFIG_DELAY 0x00000FFFU
<> 144:ef7eb2e8f9f7 178
AnnaBridge 165:e614a9f1c9e2 179 #define PHY_READ_TO 0x0000FFFFU
AnnaBridge 165:e614a9f1c9e2 180 #define PHY_WRITE_TO 0x0000FFFFU
<> 144:ef7eb2e8f9f7 181
<> 144:ef7eb2e8f9f7 182 /* Section 3: Common PHY Registers */
<> 144:ef7eb2e8f9f7 183
AnnaBridge 165:e614a9f1c9e2 184 #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
AnnaBridge 165:e614a9f1c9e2 185 #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
AnnaBridge 187:0387e8f68319 186
<> 144:ef7eb2e8f9f7 187 #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
<> 144:ef7eb2e8f9f7 188 #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
<> 144:ef7eb2e8f9f7 189 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
<> 144:ef7eb2e8f9f7 190 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
<> 144:ef7eb2e8f9f7 191 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
<> 144:ef7eb2e8f9f7 192 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
<> 144:ef7eb2e8f9f7 193 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
<> 144:ef7eb2e8f9f7 194 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
<> 144:ef7eb2e8f9f7 195 #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
<> 144:ef7eb2e8f9f7 196 #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
<> 144:ef7eb2e8f9f7 197
<> 144:ef7eb2e8f9f7 198 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
<> 144:ef7eb2e8f9f7 199 #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
<> 144:ef7eb2e8f9f7 200 #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
AnnaBridge 187:0387e8f68319 201
<> 144:ef7eb2e8f9f7 202 /* Section 4: Extended PHY Registers */
<> 144:ef7eb2e8f9f7 203
AnnaBridge 165:e614a9f1c9e2 204 #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
AnnaBridge 165:e614a9f1c9e2 205 #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
AnnaBridge 165:e614a9f1c9e2 206 #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
AnnaBridge 187:0387e8f68319 207
<> 144:ef7eb2e8f9f7 208 #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
<> 144:ef7eb2e8f9f7 209 #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
<> 144:ef7eb2e8f9f7 210 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
<> 144:ef7eb2e8f9f7 211
<> 144:ef7eb2e8f9f7 212 #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
<> 144:ef7eb2e8f9f7 213 #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
<> 144:ef7eb2e8f9f7 214
<> 144:ef7eb2e8f9f7 215 #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
<> 144:ef7eb2e8f9f7 216 #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
<> 144:ef7eb2e8f9f7 217
AnnaBridge 165:e614a9f1c9e2 218 /* ################## SPI peripheral configuration ########################## */
<> 144:ef7eb2e8f9f7 219
AnnaBridge 165:e614a9f1c9e2 220 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
AnnaBridge 165:e614a9f1c9e2 221 * Activated: CRC code is present inside driver
AnnaBridge 165:e614a9f1c9e2 222 * Deactivated: CRC code cleaned from driver
AnnaBridge 165:e614a9f1c9e2 223 */
AnnaBridge 165:e614a9f1c9e2 224
AnnaBridge 165:e614a9f1c9e2 225 #define USE_SPI_CRC 1U
<> 144:ef7eb2e8f9f7 226
<> 144:ef7eb2e8f9f7 227 /* Includes ------------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 228 /**
AnnaBridge 187:0387e8f68319 229 * @brief Include module's header file
<> 144:ef7eb2e8f9f7 230 */
<> 144:ef7eb2e8f9f7 231
<> 144:ef7eb2e8f9f7 232 #ifdef HAL_RCC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 233 #include "stm32f1xx_hal_rcc.h"
<> 144:ef7eb2e8f9f7 234 #endif /* HAL_RCC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 235
<> 144:ef7eb2e8f9f7 236 #ifdef HAL_GPIO_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 237 #include "stm32f1xx_hal_gpio.h"
<> 144:ef7eb2e8f9f7 238 #endif /* HAL_GPIO_MODULE_ENABLED */
AnnaBridge 187:0387e8f68319 239
<> 144:ef7eb2e8f9f7 240 #ifdef HAL_DMA_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 241 #include "stm32f1xx_hal_dma.h"
<> 144:ef7eb2e8f9f7 242 #endif /* HAL_DMA_MODULE_ENABLED */
AnnaBridge 187:0387e8f68319 243
<> 144:ef7eb2e8f9f7 244 #ifdef HAL_ETH_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 245 #include "stm32f1xx_hal_eth.h"
AnnaBridge 187:0387e8f68319 246 #endif /* HAL_ETH_MODULE_ENABLED */
AnnaBridge 187:0387e8f68319 247
<> 144:ef7eb2e8f9f7 248 #ifdef HAL_CAN_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 249 #include "stm32f1xx_hal_can.h"
<> 144:ef7eb2e8f9f7 250 #endif /* HAL_CAN_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 251
<> 144:ef7eb2e8f9f7 252 #ifdef HAL_CEC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 253 #include "stm32f1xx_hal_cec.h"
<> 144:ef7eb2e8f9f7 254 #endif /* HAL_CEC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 255
<> 144:ef7eb2e8f9f7 256 #ifdef HAL_CORTEX_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 257 #include "stm32f1xx_hal_cortex.h"
<> 144:ef7eb2e8f9f7 258 #endif /* HAL_CORTEX_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 259
<> 144:ef7eb2e8f9f7 260 #ifdef HAL_ADC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 261 #include "stm32f1xx_hal_adc.h"
<> 144:ef7eb2e8f9f7 262 #endif /* HAL_ADC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 263
<> 144:ef7eb2e8f9f7 264 #ifdef HAL_CRC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 265 #include "stm32f1xx_hal_crc.h"
<> 144:ef7eb2e8f9f7 266 #endif /* HAL_CRC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 267
<> 144:ef7eb2e8f9f7 268 #ifdef HAL_DAC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 269 #include "stm32f1xx_hal_dac.h"
<> 144:ef7eb2e8f9f7 270 #endif /* HAL_DAC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 271
<> 144:ef7eb2e8f9f7 272 #ifdef HAL_FLASH_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 273 #include "stm32f1xx_hal_flash.h"
<> 144:ef7eb2e8f9f7 274 #endif /* HAL_FLASH_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 275
<> 144:ef7eb2e8f9f7 276 #ifdef HAL_SRAM_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 277 #include "stm32f1xx_hal_sram.h"
<> 144:ef7eb2e8f9f7 278 #endif /* HAL_SRAM_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 279
<> 144:ef7eb2e8f9f7 280 #ifdef HAL_NOR_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 281 #include "stm32f1xx_hal_nor.h"
<> 144:ef7eb2e8f9f7 282 #endif /* HAL_NOR_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 283
<> 144:ef7eb2e8f9f7 284 #ifdef HAL_I2C_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 285 #include "stm32f1xx_hal_i2c.h"
<> 144:ef7eb2e8f9f7 286 #endif /* HAL_I2C_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 287
<> 144:ef7eb2e8f9f7 288 #ifdef HAL_I2S_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 289 #include "stm32f1xx_hal_i2s.h"
<> 144:ef7eb2e8f9f7 290 #endif /* HAL_I2S_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 291
<> 144:ef7eb2e8f9f7 292 #ifdef HAL_IWDG_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 293 #include "stm32f1xx_hal_iwdg.h"
<> 144:ef7eb2e8f9f7 294 #endif /* HAL_IWDG_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 295
<> 144:ef7eb2e8f9f7 296 #ifdef HAL_PWR_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 297 #include "stm32f1xx_hal_pwr.h"
<> 144:ef7eb2e8f9f7 298 #endif /* HAL_PWR_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 299
<> 144:ef7eb2e8f9f7 300 #ifdef HAL_RTC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 301 #include "stm32f1xx_hal_rtc.h"
<> 144:ef7eb2e8f9f7 302 #endif /* HAL_RTC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 303
<> 144:ef7eb2e8f9f7 304 #ifdef HAL_PCCARD_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 305 #include "stm32f1xx_hal_pccard.h"
AnnaBridge 187:0387e8f68319 306 #endif /* HAL_PCCARD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 307
<> 144:ef7eb2e8f9f7 308 #ifdef HAL_SD_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 309 #include "stm32f1xx_hal_sd.h"
AnnaBridge 187:0387e8f68319 310 #endif /* HAL_SD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 311
<> 144:ef7eb2e8f9f7 312 #ifdef HAL_NAND_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 313 #include "stm32f1xx_hal_nand.h"
AnnaBridge 187:0387e8f68319 314 #endif /* HAL_NAND_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 315
<> 144:ef7eb2e8f9f7 316 #ifdef HAL_SPI_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 317 #include "stm32f1xx_hal_spi.h"
<> 144:ef7eb2e8f9f7 318 #endif /* HAL_SPI_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 319
<> 144:ef7eb2e8f9f7 320 #ifdef HAL_TIM_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 321 #include "stm32f1xx_hal_tim.h"
<> 144:ef7eb2e8f9f7 322 #endif /* HAL_TIM_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 323
<> 144:ef7eb2e8f9f7 324 #ifdef HAL_UART_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 325 #include "stm32f1xx_hal_uart.h"
<> 144:ef7eb2e8f9f7 326 #endif /* HAL_UART_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 327
<> 144:ef7eb2e8f9f7 328 #ifdef HAL_USART_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 329 #include "stm32f1xx_hal_usart.h"
<> 144:ef7eb2e8f9f7 330 #endif /* HAL_USART_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 331
<> 144:ef7eb2e8f9f7 332 #ifdef HAL_IRDA_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 333 #include "stm32f1xx_hal_irda.h"
<> 144:ef7eb2e8f9f7 334 #endif /* HAL_IRDA_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 335
<> 144:ef7eb2e8f9f7 336 #ifdef HAL_SMARTCARD_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 337 #include "stm32f1xx_hal_smartcard.h"
<> 144:ef7eb2e8f9f7 338 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 339
<> 144:ef7eb2e8f9f7 340 #ifdef HAL_WWDG_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 341 #include "stm32f1xx_hal_wwdg.h"
<> 144:ef7eb2e8f9f7 342 #endif /* HAL_WWDG_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 343
<> 144:ef7eb2e8f9f7 344 #ifdef HAL_PCD_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 345 #include "stm32f1xx_hal_pcd.h"
<> 144:ef7eb2e8f9f7 346 #endif /* HAL_PCD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 347
<> 144:ef7eb2e8f9f7 348 #ifdef HAL_HCD_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 349 #include "stm32f1xx_hal_hcd.h"
AnnaBridge 165:e614a9f1c9e2 350 #endif /* HAL_HCD_MODULE_ENABLED */
AnnaBridge 165:e614a9f1c9e2 351
AnnaBridge 165:e614a9f1c9e2 352 #ifdef HAL_MMC_MODULE_ENABLED
AnnaBridge 187:0387e8f68319 353 #include "stm32f1xx_hal_mmc.h"
AnnaBridge 165:e614a9f1c9e2 354 #endif /* HAL_MMC_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 355
<> 144:ef7eb2e8f9f7 356 /* Exported macro ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 357 #ifdef USE_FULL_ASSERT
AnnaBridge 187:0387e8f68319 358 // MBED patch: all targets use the same assert file
AnnaBridge 167:e84263d55307 359 #include "stm32_assert.h"
AnnaBridge 187:0387e8f68319 360 /**
AnnaBridge 187:0387e8f68319 361 * @brief The assert_param macro is used for function's parameters check.
AnnaBridge 187:0387e8f68319 362 * @param expr: If expr is false, it calls assert_failed function
AnnaBridge 187:0387e8f68319 363 * which reports the name of the source file and the source
AnnaBridge 187:0387e8f68319 364 * line number of the call that failed.
AnnaBridge 187:0387e8f68319 365 * If expr is true, it returns no value.
AnnaBridge 187:0387e8f68319 366 * @retval None
AnnaBridge 187:0387e8f68319 367 */
AnnaBridge 187:0387e8f68319 368 //#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
AnnaBridge 187:0387e8f68319 369 /* Exported functions ------------------------------------------------------- */
AnnaBridge 187:0387e8f68319 370 //void assert_failed(uint8_t *file, uint32_t line);
<> 144:ef7eb2e8f9f7 371 #else
AnnaBridge 187:0387e8f68319 372 #define assert_param(expr) ((void)0U)
<> 144:ef7eb2e8f9f7 373 #endif /* USE_FULL_ASSERT */
<> 144:ef7eb2e8f9f7 374
AnnaBridge 165:e614a9f1c9e2 375
<> 144:ef7eb2e8f9f7 376 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 377 }
<> 144:ef7eb2e8f9f7 378 #endif
<> 144:ef7eb2e8f9f7 379
<> 144:ef7eb2e8f9f7 380 #endif /* __STM32F1xx_HAL_CONF_H */
<> 144:ef7eb2e8f9f7 381
<> 144:ef7eb2e8f9f7 382
<> 144:ef7eb2e8f9f7 383 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/