u-blox
This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. u-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Dependencies: mbed
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Diff: main.cpp
- Revision:
- 3:e8792e374579
- Parent:
- 2:490b4b087576
--- a/main.cpp Wed Nov 06 10:49:23 2013 +0000
+++ b/main.cpp Thu Jun 12 07:29:20 2014 +0000
@@ -1,11 +1,24 @@
#include "mbed.h"
-#include "C027.h"
+#ifdef TARGET_UBLOX_C027
+ #include "C027_api.h"
+#else
+ #error "This example is targeted for the C027 platform"
+#endif
+/* This example is establishing a transparent link between
+ the mbed serial port and the serial communication interface
+ of the GPS.
+
+ For a more advanced driver for the GPS or Modem(MDM) please
+ look at the follwing library and example:
+ C027_Support Library
+ http://mbed.org/teams/ublox/code/C027_Support/
+ C027_Support Example
+ http://mbed.org/teams/ublox/code/C027_SupportTest/
+*/
int main()
{
- C027 c027;
- c027.gpsPower(true);
-
+ c027_gps_powerOn();
int baud = GPSBAUD;
// open the gps serial port