This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. u-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html

Dependencies:   mbed

Install mbed Windows Drivers

Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration

Download repository: zip gz

Files at revision 3:e8792e374579

Name Size Actions
[up]
main.cpp 1084 Revisions Annotate
mbed.bld 65 Revisions Annotate