ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Diff: mbed_lib.json

Revision:
7:e90fa8f6bc6c
Parent:
2:45642c5198a2
--- a/mbed_lib.json	Wed Oct 19 10:04:00 2016 +0200
+++ b/mbed_lib.json	Fri Oct 21 14:56:55 2016 +0200
@@ -1,4 +1,14 @@
 {
-    "name": "myspirit1",
+    "name": "spirit1",
+    "config": {
+    	"mac-address-0": "0x0",
+    	"mac-address-1": "0x0",
+    	"mac-address-2": "0x0",
+    	"mac-address-3": "0x0",
+    	"mac-address-4": "0x0",
+    	"mac-address-5": "0x0",
+    	"mac-address-6": "0x0",
+    	"mac-address-7": "0x0"
+    },
     "macros": ["USE_STM32F4XX_NUCLEO", "X_NUCLEO_IDS01A4", "SPIRIT_USE_FULL_ASSERT"]
 }