STM32 Nucleo-144 development board with STM32F429ZIT6 MCU, supports Arduino, ST Zio and morpho connectivity


The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ST Zio connector, which is an extension of Arduino™ Uno V3, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, , as well as a direct access to the ARM®mbed™online resources.

Microcontroller features

Nucleo features

Board pinout

Zio and Arduino-compatible headers

/media/uploads/ErwanST/nucleo_f429zi_arduino_right-top.jpg /media/uploads/ErwanST/nucleo_f429zi_arduino_left-top.jpg

CN11 CN12 headers

/media/uploads/ErwanST/nucleo_f429zi_zio_right-bottom.jpg /media/uploads/ErwanST/nucleo_f429zi_zio_left-bottom.jpg


Only the labels written in blue/white or green/white (i.e. PA_4, PB_5, A0, D14, LED1...) must be used in your code. The other labels are given as information (alternate-functions, power pins, ...).

You can find more details on the available pins and labels in the following files (link to the latest mbed-dev library version):

Getting started

This video shows how to get started with ARM mbed Integrated Development Environment using STM32 Nucleo platform:

Supported shields

ST X-NUCLEO boards

See Matrix of tested boards.

Other Non-ST boards

See here.

Technical references

For more information, please refer to:

Known limitations

The following section describes known limitations of the platform. Note that general issues are tracked into the mbed repository available on GitHub.

Conflict between Ethernet and SPI pins on Arduino D11

"target_overrides": {
    "NUCLEO_F429ZI":  {
        "d11_configuration": "PB_5"

See the mbed-cli documentation for more information on the syntax.

Please log in to start a discussion or ask a question.

Discussion topics

TopicRepliesLast post
ip address is not showing | STM32F429ZI nucleo 0 16 May 2017 by utpal kumar
When is Ethernet going to be supported on the F429? 4 13 Dec 2016 by Awais Arshad


See more related questions