mbedOS client example, modified to push X-Nucleo-IKS01A1/2 Environmental Sensor data to mbed Cloud Connector.
Dependencies: X_NUCLEO_IKS01A1 X_NUCLEO_IKS01A2
The application is derived from the official mbedOS client example (link) and has been tested using a X-NUCLEO-IKS01A2 (default) or a X-NUCLEO-IKS01A1 motion and environmental sensors expansion board connected to a ST NUCLEO-F429ZI platform.
The following steps should be performed to make the application work:
- Register and login into ARM mbed Connector.
- Replace the default and empty security.h file with the one associated with your account and provided by the Connector (Security Credentials menu).
- In order to use X-NUCLEO-IKS01A1 instead of default X-NUCLEO-IKS02A1 comment out the IKS01A2 macro definition in main.cpp file.
- Choose NUCLEO-F429ZI as a target either from online compiler or from CLI, compile and flash.
- Connect the board to your ethernet network, open a serial terminal (params 115200N1) and wait that the client is connected to the mbed Connector.
- Press user button to start acquiring and pushing the environmental (pressure, temperature and humidity) data.
Note: environmental data are expressed using IPSO representation based on OMA LWM2M standard.
mbed_app.json
- Committer:
- nikapov
- Date:
- 2017-04-26
- Revision:
- 0:003e60a0deb8
File content as of revision 0:003e60a0deb8:
{ "config": { "network-interface":{ "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD", "value": "ETHERNET" }, "mesh_radio_type": { "help": "options are ATMEL, MCR20, SPIRIT1", "value": "ATMEL" }, "wifi-ssid": { "help": "WiFi SSID", "value": "\"SSID\"" }, "wifi-password": { "help": "WiFi Password", "value": "\"Password\"" }, "wifi-tx": { "help": "TX pin for serial connection to external device", "value": "D1" }, "wifi-rx": { "help": "RX pin for serial connection to external device", "value": "D0" } }, "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\""], "target_overrides": { "*": { "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"], "platform.stdio-baud-rate": 115200, "platform.stdio-convert-newlines": true, "mbed-mesh-api.6lowpan-nd-channel-page": 0, "mbed-mesh-api.6lowpan-nd-channel": 12, "mbed-trace.enable": 0 }, "NUCLEO_F401RE": { "wifi-tx": "PA_11", "wifi-rx": "PA_12" }, "NUCLEO_F411RE": { "wifi-tx": "PA_11", "wifi-rx": "PA_12" }, "UBLOX_EVK_ODIN_W2": { "target.device_has_remove": ["EMAC"] } } }