X-NUCLEO-NFC01A1 Dynamic NFC Tag Expansion Board Firmware Package

Introduction

This firmware package includes Components Device Drivers, Board Support Package and example applications for STMicroelectronics X-NUCLEO-NFC01A1 Dynamic NFC Tag Expansion Board based on M24SR.

Example Application

This is just a simple "hello world" style program for the X-NUCLEO-NFC01A1 Dynamic NFC Tag Expansion Board. The program writes a URI link to the M24SR dynamic tag using the synchronous programming model. The URI can then be retrieved from an NFC enabled smartphone/tablet.

A more complex example providing asynchronous access to the tag is also available.

main.cpp

Committer:: giovannivisentini
Date:: 2015-12-21
Revision:: 0:151ae20d098f
Child:: 1:eff1b8998438

File content as of revision 0:151ae20d098f:

/**
  ******************************************************************************
  * @file       main.cpp
  * @date       21/12/2015
  * @brief      This demo write an ndef message with an url inside
  ******************************************************************************
  *
  * COPYRIGHT(c) 2015 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
  
#include "mbed.h"

#include "X_NUCLEO_NFC01A1.h"
#include "Type4NfcTagM24SR.h"
#include "NDefLib/RecordType/RecordURI.h"

/**
 * write a Ndef linking the st.com site
 */
int main(void){
    Serial pc(SERIAL_TX, SERIAL_RX);
    
    //use dafault board pin
    I2C i2cChannel(X_NUCLEO_NFC01A1::DEFAULT_SDA_PIN,X_NUCLEO_NFC01A1::DEFAULT_SDL_PIN);
    X_NUCLEO_NFC01A1 *nfcNucleo = X_NUCLEO_NFC01A1::Instance(i2cChannel);
    
    //create the wrapper for use the NdefLib
    Type4NfcTagM24SR tag(nfcNucleo->getM24SR());
    pc.printf("System Init done: !\n\r");
    //open the i2c session with the nfc chip
    if(tag.openSession()){
        nfcNucleo->getLed1()=1;
        
        //create the NDef message and record
        NDefLib::Message msg;
        NDefLib::RecordURI rUri(NDefLib::RecordURI::HTTP_WWW,"st.com");
        msg.addRecord(&rUri);

        //write the tag
        if(tag.write(msg)){
            pc.printf("Tag writed \n\r");
            nfcNucleo->getLed2()=1;
        }

    
        //close the i2c session
        if(!tag.closeSession()){
            pc.printf("Error Closing the session\n\r");
        }else
            nfcNucleo->getLed3()=1;
    }else
        pc.printf("Error open Session\n\r");
}