X-NUCLEO-NFC01A1 Dynamic NFC Tag

The X-NUCLEO-NFC01A1 is a Dynamic NFC tag evaluation board to allow expansion of the STM32 Nucleo boards.

Hello World

Import programHelloWorld_NFC01A1

Example application for the X-Nucleo-NFC01A1 Dynamic NFC Tag board.

Library

Import libraryX_NUCLEO_NFC01A1

Firmware library for the X-NUCLEO-NFC01A1 Dynamic NFC Tag board.

Pinout

Datasheet

http://www.st.com/st-web-ui/static/active/en/resource/technical/document/data_brief/DM00121620.pdf

Notes

The X-NUCLEO-NFC01A1 is a Dynamic NFC tag evaluation board to allow expansion of the STM32 Nucleo boards.
It is compatible with the Arduino UNO R3 connector layout and it is designed around the M24SR64-Y.
The M24SR64-Y device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbit EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or a NFC phone.

The board is powered through the Arduino UNO R3 connectors.
It also includes three LEDs for general purpose.

For further information and ordering please refer to ST web site.

Asynchronous Hello World

The "Asynchronous Hello World" is a more complex application providing an example of asynchronous access to the X-NUCLEO-NFC01A1 Dynamic NFC Tag Expansion Board.
The program writes a URI link to the M24SR dynamic tag using the asynchronous programming model.
The URI can then be retrieved from an NFC enabled smartphone/tablet.

Import programHelloWorld_Async_NFC01A1

A simple application providing an example of asynchronous access to the X-NUCLEO_NFC01A1 Dynamic NFC Tag board.


NFC01A1 Demos

This application provides a set of demos with X-NUCLEO-NFC01A1 expansion board.

Import programNFC01A1_Demos

This application provides a set of demos with X-NUCLEO-NFC01A1 expansion board.


Please log in to start a discussion or ask a question.

Questions

1
answers
Offline compile -deleted-
1 month, 2 weeks ago

Dynamic, NFC, NFC01A1, Nucleo, Tag, X