Diff: IQS620DisplayTerminal.cpp

Revision:

3:945b99d8bb87

Parent:

2:da8082c7476a

Child:

5:2f4f4db0e46b

--- a/IQS620DisplayTerminal.cpp	Sat May 13 00:12:38 2017 +0000
+++ b/IQS620DisplayTerminal.cpp	Sun May 14 19:32:03 2017 +0000
@@ -15,19 +15,20 @@
 IQS620Display::IQS620Display() : Serial(USBTX,USBRX) // use mbed default serial port
 #endif
 
-{    
+{
     frameCounter=0;
     baud(DISPLAY_BAUD_RATE);
-}    
+}
 
 #if defined(TARGET_TEENSY3_1) || defined (TARGET_TEENSY3_2) || IQS_USE_USBSERIAL
-void IQS620Display::baud(int baudRate){}
+void IQS620Display::baud(int baudRate) {}
 #endif
 
 // display a startup message to serial port
-void IQS620Display::helloMessage(bool waitForUser) {
+void IQS620Display::helloMessage(bool waitForUser)
+{
     puts("\x1b[2J  \x1b[?25l  \x1b[H"); // ANSII/VT100 codes to clear screen, invisible cursor, home cursor
-    printf("           IQS620 Register Display\r\n\r\n"); 
+    printf("           IQS620 Register Display\r\n\r\n");
     printf("To get a smooth screen refresh effect, use a terminal program that supports ANSI/VT100 escape codes such as Tera Term.\r\n\r\n");
     printf("Handy hint - In many terminal programs, Alt-B (break) will reset your mbed Board.\r\n\r\n");
     printf("Press any key to continue...\r\n");
@@ -36,49 +37,53 @@
 }
 
 // show headings and I2C error count
-void IQS620Display::showStatus(int I2Cspeed, int I2CErrorCount) {
+void IQS620Display::showStatus(int I2Cspeed, int I2CErrorCount)
+{
     frameCounter++;
     puts("\x1b[H"); // ANSI/VT100 command for cursor home
-    printf("\t"); 
+    printf("\t");
     printf("\t IQS620 Register Display\r\n\r\n"); // heading
     printf("\t Frame number %06d", frameCounter);
     printf("\t I2C Speed %dk", I2Cspeed/1000);
     printf("\t I2C Errors %d", I2CErrorCount);
 }
 
-// dump one line of text from the buffer with VT100 color formatting    
-void IQS620Display::showLine(char * buffer, char * color, int startbyte, int endbyte) {
-  for (int i=startbyte; i<=endbyte; i++) {
+// dump one line of text from the buffer with VT100 color formatting
+void IQS620Display::showLine(char * buffer, char * color, int startbyte, int endbyte)
+{
+    for (int i=startbyte; i<=endbyte; i++) {
         if ( color == NULL || color[i] == 0 )
-          printf("%02x ", buffer[i]);
+            printf("%02x ", buffer[i]);
         else
-        #define USE_IQS_COLOR_DISPLAY
-        #ifndef DONT_USE_IQS_COLOR_DISPLAY        
-          printf("\x1b[32m%02x\x1b[30m ", buffer[i]); // print out in green (ANSI VT100 code)
-        #else
-          printf("%02x ", buffer[i]); // print out in black & white
-        #endif
-      }
- }
+#define USE_IQS_COLOR_DISPLAY
+#ifndef DONT_USE_IQS_COLOR_DISPLAY
+            printf("\x1b[32m%02x\x1b[30m ", buffer[i]); // print out in green (ANSI VT100 code)
+#else
+            printf("%02x ", buffer[i]); // print out in black & white
+#endif
+    }
+}
 
 
 
 
 // formatted hex display of IQS620 registers
 // with color highlighting
-void IQS620Display::showRegisters(char * buffer,char * color) {
-    printf("\r\n\r\n           Device ID (41) [00] "); showLine(buffer,color,0x00,0x02);
-    printf("\r\n\r\n         Events and Flags [10] "); showLine(buffer,color,0x10,0x1b);
-    printf("\r\n\r\n  Channels 0-5 Raw Values [20] "); showLine(buffer,color,0x20,0x2b);
-    printf("\r\n\r\n   Long Term Average Data [30] "); showLine(buffer,color,0x30,0x35);
-    printf("\r\n\r\n   Proxfusion Settings #0 [40] "); showLine(buffer,color,0x40,0x4b);
-    printf("\r\n\r\n   Proxfusion Settings #1 [50] "); showLine(buffer,color,0x50,0x57);
-    printf("\r\n\r\n    Proxfusion Thresholds [60] "); showLine(buffer,color,0x60,0x66);
-    printf("\r\n\r\n           SAR Thresholds [70] "); showLine(buffer,color,0x70,0x75);
-    printf("\r\n\r\n   Metal Detect Threshold [80] "); showLine(buffer,color,0x80,0x83);
-    printf("\r\n\r\n     Hall Sensor Settings [90] "); showLine(buffer,color,0x90,0x93);
-    printf("\r\n\r\n   Hall Switch Thresholds [A0] "); showLine(buffer,color,0xa0,0xa5);
-    printf("\r\n\r\n   Temperature Cal/Limits [C0] "); showLine(buffer,color,0xc0,0xc3);
-    printf("\r\n\r\n  Device & Power Settings [D0] "); showLine(buffer,color,0xd0,0xd8);
+void IQS620Display::showRegisters(char * buffer,char * color, bool showAllRegisters)
+{
+    bool d = showAllRegisters; // if true show all 16 registers per line - for debugging
+    printf("\r\n\r\n           Device ID (41) [00] ");    showLine(buffer,color,0x00,d?0x02:0x0f);
+    printf("\r\n\r\n         Events and Flags [10] ");    showLine(buffer,color,0x10,d?0x1b:0x1f);
+    printf("\r\n\r\n  Channels 0-5 Raw Values [20] ");    showLine(buffer,color,0x20,d?0x2b:0x2f);
+    printf("\r\n\r\n   Long Term Average Data [30] ");    showLine(buffer,color,0x30,d?0x35:0x3f);
+    printf("\r\n\r\n   Proxfusion Settings #0 [40] ");    showLine(buffer,color,0x40,d?0x4b:0x4f);
+    printf("\r\n\r\n   Proxfusion Settings #1 [50] ");    showLine(buffer,color,0x50,d?0x57:0x5f);
+    printf("\r\n\r\n    Proxfusion Thresholds [60] ");    showLine(buffer,color,0x60,d?0x66:0x6f);
+    printf("\r\n\r\n           SAR Thresholds [70] ");    showLine(buffer,color,0x70,d?0x75:0x7f);
+    printf("\r\n\r\n   Metal Detect Threshold [80] ");    showLine(buffer,color,0x80,d?0x83:0x8f);
+    printf("\r\n\r\n     Hall Sensor Settings [90] ");    showLine(buffer,color,0x90,d?0x93:0x9f);
+    printf("\r\n\r\n   Hall Switch Thresholds [A0] ");    showLine(buffer,color,0xa0,d?0xa5:0xaf);
+    printf("\r\n\r\n   Temperature Cal/Limits [C0] ");    showLine(buffer,color,0xc0,d?0xc3:0xcf);
+    printf("\r\n\r\n  Device & Power Settings [D0] ");    showLine(buffer,color,0xd0,d?0xd8:0xdf);
     printf("\r\n\r\n");
 }
\ No newline at end of file