雄介 太田
mbed(SerialHalfDuplex入り)
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L152RE/stm32l1xx_hal_opamp_ex.h
- Revision:
- 90:cb3d968589d8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_hal_opamp_ex.h Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_opamp_ex.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 5-September-2014
+ * @brief Header file of OPAMP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_OPAMP_EX_H
+#define __STM32L1xx_HAL_OPAMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup OPAMPEx
+ * @{
+ */
+
+
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants ---------------------------------------------------------*/
+/** @defgroup OPAMPEx_Exported_Constants OPAMPEx Exported Constants
+ * @{
+ */
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#define OPAMP_CSR_OPAXPD_ALL \
+ (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD | OPAMP_CSR_OPA3PD)
+
+#define OPAMP_CSR_OPAXCAL_L_ALL \
+ (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L | OPAMP_CSR_OPA3CAL_L)
+
+#define OPAMP_CSR_OPAXCAL_H_ALL \
+ (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H | OPAMP_CSR_OPA3CAL_H)
+
+#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS \
+ (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \
+ OPAMP_CSR_ANAWSEL1 | \
+ OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \
+ OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2 | \
+ OPAMP_CSR_S3SEL3 | OPAMP_CSR_S4SEL3 | OPAMP_CSR_S5SEL3 | OPAMP_CSR_S6SEL3 | \
+ OPAMP_CSR_ANAWSEL3 )
+#else
+#define OPAMP_CSR_OPAXPD_ALL \
+ (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD)
+
+#define OPAMP_CSR_OPAXCAL_L_ALL \
+ (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L)
+
+#define OPAMP_CSR_OPAXCAL_H_ALL \
+ (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H)
+
+#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS \
+ (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \
+ OPAMP_CSR_ANAWSEL1 | \
+ OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \
+ OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2 )
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup OPAMPEx_Exported_Macro OPAMPEx Exported Macro
+ * @{
+ */
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+/**
+ * @brief Enable internal analog switch SW1 to connect OPAMP3 ouput to ADC
+ * switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting input
+ * (OPAMP3 available on STM32L1 devices Cat.4 only).
+ * @retval None
+ */
+#define __HAL_OPAMP_OPAMP3OUT_CONNECT_ADC_COMP1() __HAL_RI_SWITCH_COMP1_SW1_CLOSE()
+
+/**
+ * @brief Disable internal analog switch SW1 to disconnect OPAMP3 ouput from
+ * ADC switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting
+ * input.
+ * @retval None
+ */
+#define __HAL_OPAMP_OPAMP3OUT_DISCONNECT_ADC_COMP1() __HAL_RI_SWITCH_COMP1_SW1_OPEN()
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup OPAMPEx_Private_Macro OPAMPEx Private Macro
+ * @{
+ */
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+/**
+ * @brief Get the OPAMP instance in decimal number for further
+ * processing needs by HAL OPAMP driver functions.
+ * @param __HANDLE__: OPAMP handle
+ * @retval "0" for OPAMP1, "1" for OPAMP2, "2" for OPAMP3
+ */
+#define __OPAMP_INSTANCE_DECIMAL__(__HANDLE__) \
+ ( ( ((__HANDLE__)->Instance == OPAMP1) \
+ )? \
+ ((uint32_t)0) \
+ : \
+ ( ( ((__HANDLE__)->Instance == OPAMP2) \
+ )? \
+ ((uint32_t)1) \
+ : \
+ ((uint32_t)2) \
+ ) \
+ )
+#else
+/**
+ * @brief Get the OPAMP instance in decimal number for further
+ * processing needs by HAL OPAMP driver functions.
+ * @param __HANDLE__: OPAMP handle
+ * @retval "0" for OPAMP1, "1" for OPAMP2
+ */
+#define __OPAMP_INSTANCE_DECIMAL__(__HANDLE__) \
+ ( ( ((__HANDLE__)->Instance == OPAMP1) \
+ )? \
+ ((uint32_t)0) \
+ : \
+ ((uint32_t)1) \
+ )
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMPEx_Exported_Functions
+ * @{
+ */
+
+/* I/O operation functions *****************************************************/
+/** @defgroup OPAMPEx_Exported_Functions_Group1 Extended IO operation functions
+ * @{
+ */
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3);
+#else
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2);
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+/**
+ * @}
+ */
+/* Peripheral Control functions ************************************************/
+/** @addtogroup OPAMPEx_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef *hopamp);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32L1xx_HAL_OPAMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/