雄介 太田
mbed(SerialHalfDuplex入り)
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F411RE/stm32f4xx_hal_flash.h
- Revision:
- 86:04dd9b1680ae
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_flash.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,363 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief FLASH Error structure definition
+ */
+typedef enum
+{
+ FLASH_ERROR_RD = 0x01,
+ FLASH_ERROR_PGS = 0x02,
+ FLASH_ERROR_PGP = 0x04,
+ FLASH_ERROR_PGA = 0x08,
+ FLASH_ERROR_WRP = 0x10,
+ FLASH_ERROR_OPERATION = 0x20
+}FLASH_ErrorTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
+
+ __IO uint8_t VoltageForErase; /*Internal variable to provide voltange range selected by user in IT context*/
+
+ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
+
+ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
+
+ __IO uint32_t Address; /*Internal variable to save address selected for program*/
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @brief FLASH Error source
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
+
+#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \
+ ((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
+#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define RDP_KEY ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
+/**
+ * @}
+ */
+
+/**
+ * @brief ACR register byte 0 (Bits[7:0]) base address
+ */
+#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+/**
+ * @brief OPTCR register byte 0 (Bits[7:0]) base address
+ */
+#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+/**
+ * @brief OPTCR register byte 2 (Bits[23:16]) base address
+ */
+#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
+/**
+ * @brief OPTCR register byte 3 (Bits[31:24]) base address
+ */
+#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+ * @brief Resets the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_ICRST)
+
+/**
+ * @brief Resets the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_DCRST)
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/* Peripheral State functions ************************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/