Al Williams / Mbed 2 deprecated BLE_Beacon

Simple beacon for nRF51822

Dependencies:   BLE_API mbed nRF51822Copy

Fork of BLE_iBeacon by Bluetooth Low Energy

This is the demo beacon for ARM TechCon 2014.

Based on the original library, this demo reads the onboard switches and temperature sensor and beacons them out as a BLE advertisment.

main.cpp@5:97ce285ff00a, 2014-05-20 (annotated)

Committer:
rohit.grover
Date:
Tue May 20 17:56:47 2014 +0100
Revision:
5:97ce285ff00a
Parent:
4:0ce8d2dd62f9
Child:
6:26eab6ee6df4
white space diffs.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ktownsend 0:7613d21e5974 1 /* mbed Microcontroller Library
ktownsend 0:7613d21e5974 2 * Copyright (c) 2006-2013 ARM Limited
ktownsend 0:7613d21e5974 3 *
ktownsend 0:7613d21e5974 4 * Licensed under the Apache License, Version 2.0 (the "License");
ktownsend 0:7613d21e5974 5 * you may not use this file except in compliance with the License.
ktownsend 0:7613d21e5974 6 * You may obtain a copy of the License at
ktownsend 0:7613d21e5974 7 *
ktownsend 0:7613d21e5974 8 * http://www.apache.org/licenses/LICENSE-2.0
ktownsend 0:7613d21e5974 9 *
ktownsend 0:7613d21e5974 10 * Unless required by applicable law or agreed to in writing, software
ktownsend 0:7613d21e5974 11 * distributed under the License is distributed on an "AS IS" BASIS,
ktownsend 0:7613d21e5974 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
ktownsend 0:7613d21e5974 13 * See the License for the specific language governing permissions and
ktownsend 0:7613d21e5974 14 * limitations under the License.
ktownsend 0:7613d21e5974 15 */
ktownsend 0:7613d21e5974 16
ktownsend 0:7613d21e5974 17 #include "mbed.h"
ktownsend 0:7613d21e5974 18 #include "nRF51822n.h"
ktownsend 0:7613d21e5974 19
ktownsend 0:7613d21e5974 20 nRF51822n nrf; /* BLE radio driver */
ktownsend 0:7613d21e5974 21
ktownsend 0:7613d21e5974 22 DigitalOut led1(LED1);
ktownsend 0:7613d21e5974 23 DigitalOut led2(LED2);
ktownsend 0:7613d21e5974 24 Ticker flipper;
ktownsend 0:7613d21e5974 25 Serial pc(USBTX,USBRX);
ktownsend 0:7613d21e5974 26
ktownsend 0:7613d21e5974 27 void tickerCallback(void);
ktownsend 0:7613d21e5974 28
ktownsend 0:7613d21e5974 29 /**************************************************************************/
ktownsend 0:7613d21e5974 30 /*!
ktownsend 0:7613d21e5974 31 @brief Program entry point
ktownsend 0:7613d21e5974 32 */
ktownsend 0:7613d21e5974 33 /**************************************************************************/
ktownsend 0:7613d21e5974 34 int main(void)
ktownsend 0:7613d21e5974 35 {
ktownsend 0:7613d21e5974 36 *(uint32_t *)0x40000504 = 0xC007FFDF;
ktownsend 0:7613d21e5974 37 *(uint32_t *)0x40006C18 = 0x00008000;
ktownsend 0:7613d21e5974 38
ktownsend 0:7613d21e5974 39 /* Setup blinky: led1 is toggled in main, led2 is toggled via Ticker */
ktownsend 0:7613d21e5974 40 led1=1;
ktownsend 0:7613d21e5974 41 led2=1;
ktownsend 0:7613d21e5974 42 flipper.attach(&tickerCallback, 1.0);
ktownsend 0:7613d21e5974 43
ktownsend 0:7613d21e5974 44 /* Initialise the nRF51822 */
ktownsend 0:7613d21e5974 45 pc.printf("Initialising the nRF51822\n\r");
ktownsend 0:7613d21e5974 46 nrf.init();
ktownsend 0:7613d21e5974 47
rohit.grover 5:97ce285ff00a 48 GapAdvertisingParams advParams (
rohit.grover 5:97ce285ff00a 49 GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED );
ktownsend 0:7613d21e5974 50 GapAdvertisingData advData;
ktownsend 0:7613d21e5974 51 GapAdvertisingData scanResponse;
ktownsend 0:7613d21e5974 52
ktownsend 2:90b493cdcb1f 53 /* Define an Beacon payload
ktownsend 0:7613d21e5974 54 --------------------------------------------------------------
ktownsend 0:7613d21e5974 55 128-Bit UUID = E2 0A 39 F4 73 F5 4B C4 A1 2F 17 D1 AD 07 A9 61
ktownsend 0:7613d21e5974 56 Major/Minor = 0000 / 0000
ktownsend 0:7613d21e5974 57 Tx Power = C8
ktownsend 0:7613d21e5974 58 */
ktownsend 4:0ce8d2dd62f9 59 uint8_t beaconPayload[25] = { 0x4C, 0x00, 0x02, 0x15, 0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4, 0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61, 0x00, 0x00, 0x00, 0x00, 0xC8 };
ktownsend 0:7613d21e5974 60
ktownsend 0:7613d21e5974 61 /* Make sure we get a clean start */
ktownsend 0:7613d21e5974 62 nrf.reset();
ktownsend 0:7613d21e5974 63
ktownsend 2:90b493cdcb1f 64 /* Beacon includes the FLAG and MSD fields */
ktownsend 0:7613d21e5974 65 advData.addFlags(GapAdvertisingData::BREDR_NOT_SUPPORTED);
rohit.grover 5:97ce285ff00a 66 advData.addData(GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA,
rohit.grover 5:97ce285ff00a 67 beaconPayload,
rohit.grover 5:97ce285ff00a 68 sizeof(beaconPayload));
ktownsend 0:7613d21e5974 69
ktownsend 0:7613d21e5974 70 /* Start advertising! */
ktownsend 0:7613d21e5974 71 nrf.getGap().setAdvertisingData(advData, scanResponse);
ktownsend 0:7613d21e5974 72 nrf.getGap().startAdvertising(advParams);
ktownsend 0:7613d21e5974 73
ktownsend 0:7613d21e5974 74 /* Do blinky on LED1 while we're waiting for BLE events */
rohit.grover 5:97ce285ff00a 75 for (;; ) {
ktownsend 0:7613d21e5974 76 led1 = !led1;
ktownsend 0:7613d21e5974 77 wait(1);
ktownsend 0:7613d21e5974 78 }
ktownsend 0:7613d21e5974 79 }
ktownsend 0:7613d21e5974 80
ktownsend 0:7613d21e5974 81 /**************************************************************************/
ktownsend 0:7613d21e5974 82 /*!
ktownsend 0:7613d21e5974 83 @brief Ticker callback to switch led2 state
ktownsend 0:7613d21e5974 84 */
ktownsend 0:7613d21e5974 85 /**************************************************************************/
ktownsend 0:7613d21e5974 86 void tickerCallback(void)
ktownsend 0:7613d21e5974 87 {
ktownsend 0:7613d21e5974 88 led2 = !led2;
ktownsend 0:7613d21e5974 89 }