Diff: PinMap.h

Revision:

21:6379a5650867

Parent:

19:992eda680d91

--- a/PinMap.h	Sun Jun 03 19:25:37 2018 +0000
+++ b/PinMap.h	Mon Feb 18 22:57:14 2019 +0000
@@ -1,104 +1,17 @@
-/*
- * Copyright (c) 2018 Helmut Tschemernjak
- * 30826 Garbsen (Hannover) Germany
- * Licensed under the Apache License, Version 2.0);
- */
-
-
-
-#ifdef TARGET_NUCLEO_L476RG
- #define FEATURE_LORA
- 
-#elif TARGET_DISCO_L072CZ_LRWAN1
- #define FEATURE_LORA
-
-#elif TARGET_STM32L432KC
- #define HELTEC_STM32L4
- #define FEATURE_LORA
- #define FEATURE_USBSERIAL
-#endif
-
-
+#define FEATURE_LORA
 
-#if defined(TARGET_DISCO_L072CZ_LRWAN1)
-#define LED             LED2
-
-#define LORA_SPI_MOSI   PA_7
-#define LORA_SPI_MISO   PA_6
-#define LORA_SPI_SCLK   PB_3
-#define LORA_CS         PA_15
-#define LORA_RESET      PC_0
-#define LORA_DIO0       PB_4
-#define LORA_DIO1       PB_1
-#define LORA_DIO2       PB_0
-#define LORA_DIO3       PC_13
-#define LORA_DIO4       PA_5
-#define LORA_DIO5       PA_4
-#define LORA_ANT_RX     PA_1
-#define LORA_ANT_TX     PC_2
-#define LORA_ANT_BOOST  PC_1
-#define LORA_TCXO       PA_12   // 32 MHz
-
-
-
-#elif defined(TARGET_NUCLEO_L476RG) // using the RFM95 board
+#define USBRX           PA_10
+#define USBTX           PA_9
 
-#define LORA_SPI_MOSI   PC_12
-#define LORA_SPI_MISO   PC_11
-#define LORA_SPI_SCLK   PC_10
-#define LORA_CS         PA_0
-#define LORA_RESET      PA_1
-#define LORA_DIO0       PD_2    // DIO0=TxDone/RXDone
-#define LORA_DIO1       PB_7    //
-#define LORA_DIO2       PC_14   // DIO2=FhssChangeChannel
-#define LORA_DIO3       PC_15   // DIO3=CADDone
-#define LORA_DIO4       PH_0    // ????
-#define LORA_DIO5       NC      // unused?
-
-#elif defined (HELTEC_STM32L4)
-
-#define USER_BUTTON     PH_3    // boot pin
-#define LED             PB_1    // green
-#define LED1            LED
-#define LED2            PB_0    // red
-
-#define POWER_VEXT      PA_3
-#define POWER_VEXT_ON   0
-#define POWER_VEXT_OFF  1
-
-
-#define LORA_SPI_MOSI   PA_7
-#define LORA_SPI_MISO   PA_6
-#define LORA_SPI_SCLK   PA_5
-#define LORA_CS         PA_4
-#define LORA_RESET      PA_1
-#define LORA_DIO0       PA_0    // DIO0=TxDone/RXDone/CADDone
-#define LORA_DIO1       NC      //
-#define LORA_DIO2       NC      // 
-#define LORA_DIO3       NC      // 
-#define LORA_DIO4       NC      // 
-#define LORA_DIO5       NC      // 
-
-#elif defined(TARGET_NUCLEO_L432KC) // using the RFM95 board
-
-// #define LED             PB_3    // green
-#define LED             PB_5    // green
-
-#define LORA_SPI_MOSI   PA_7
-#define LORA_SPI_MISO   PA_6
-#define LORA_SPI_SCLK   PB_5
-#define LORA_CS         PA_4
-#define LORA_RESET      PA_1
-#define LORA_DIO0       PA_0    // DIO0=TxDone/RXDone/CADDone
-#define LORA_DIO1       NC      //
-#define LORA_DIO2       NC      // 
-#define LORA_DIO3       NC      // 
-#define LORA_DIO4       NC      // 
-#define LORA_DIO5       NC      //
-
-
-#else 
-
-#error "unknown board"
-
-#endif
\ No newline at end of file
+#define LED             PB_5
+#define LORA_SPI_MOSI   PB_15
+#define LORA_SPI_MISO   PB_14
+#define LORA_SPI_SCLK   PB_13
+#define LORA_CS         PB_12
+#define LORA_RESET      PB_10
+#define LORA_DIO0       PB_11
+#define LORA_DIO1       PC_13
+#define LORA_DIO2       PB_9
+#define LORA_DIO3       PB_4
+#define LORA_DIO4       PB_3
+#define LORA_DIO5       PA_15
\ No newline at end of file