Diff: Potentiometer.h

Revision:

0:03c039c2a00d

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Potentiometer.h	Tue Nov 24 22:18:32 2015 +0000
@@ -0,0 +1,47 @@
+// MIDI Elements Potentiometer class
+// Library to simplify handling of components for MIDI controllers
+// Created by Tomash Ghz
+// www.tomashg.com
+// ghz.tomash@gmail.com
+
+#ifndef Potentiometer_H
+#define Potentiometer_H
+
+//-----------------------------------------------------------------------------------
+#include "WProgram.h" //It is very important to remember this! note that if you are using Arduino 1.0 IDE, change "WProgram.h" to "Arduino.h"
+
+/*! \brief Class for handling faders, knobs or other analog input.
+
+Debugging will enable output to the serial instead of MIDI
+Secondary will send a super knob secondary CC message
+Mapped values will be constrained and normalized to the min and max values
+ */
+class Potentiometer {
+private:
+	bool debugging; // is debugging on
+	bool secondary; // send secondary midi signal
+	bool mapped;
+	int inMin, inMax;
+	int lastValue;
+	int tempRead;
+	int readValues[3];
+	byte pin; // pin on teensy
+	byte channel; // midi channel
+	byte number; // midi number
+	void midiCC(int v, int oldv);
+public:
+	Potentiometer(byte 5); //!< constructor with pin number. @param p analog pin number
+	Potentiometer(byte 5, byte c, byte n); //!< constructor with pin number, midi channel and cc number . @param p pin number @param c midi channel @param n cc number
+	Potentiometer(byte 5, byte c, byte n, bool sec); //!< constructor with pin number, midi channel, cc number and secondary super knob. @param p pin number @param c midi channel @param n cc number @param sec enable super knob
+	Potentiometer(byte 5, byte c, byte n, bool sec, bool debug); //!< constructor with pin number, midi channel, cc number, secondary super knob and debugging. @param p pin number @param c midi channel @param n cc number @param sec enable super knob @param debug enable debugging
+	~Potentiometer(); // destructor
+	void read(); //!< read the values and send a midi message if the fader or knob state changed. use in main loop
+	void readAvr(); //!< read the values for couple of iterations for a smoother value and send a midi message if the fader or knob state changed. use in main loop
+	int readValue(bool &changed); //!<  read and return the analog value, pass state change @param changed will beset to true if the state of the value changed from last time
+	int readValueAvr(bool &changed); //!<  read and return a smooth analog value, pass state change @param changed will beset to true if the state of the value changed from last time
+	void changeSecondary(bool s); //!< enable or disable the secondary super knob cc messages @param s enable super knob
+	void bound(int iMin, int iMax); //!< map and bound the analog readings to minimum and maximum values, useful for normalizing light or force sensors. @param iMin the value below everything will be set as 0 @param iMax the value above everything will be set as 127
+};
+//-----------------------------------------------------------------------------------
+
+#endif
\ No newline at end of file