Diff: readme.txt

Revision:

0:b079fa4ed182

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/readme.txt	Wed Nov 02 23:50:52 2016 +0000
@@ -0,0 +1,88 @@
+/**
+  @page DMA_RAM_DAC DMA RAM to DAC example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2014 STMicroelectronics *******************
+  * @file    DMA_RAM_DAC/readme.txt 
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    20-June-2014
+  * @brief   Description of the DMA RAM to DAC example.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description
+
+This example provides a description of how to use a DMA channel to transfer 
+data buffer from RAM memory to DAC.
+
+DMA1 channel3 is configured to transfer continuously, word by word, a 32-word buffer 
+to the dual DAC register DAC_DHR12RD. Both DAC channels conversions are configured 
+to be triggered by TIM2 TRGO triggers and without noise/triangle wave generation.
+12bit right data alignment is selected since we choose to access DAC_DHR12RD register.
+
+@par Directory contents 
+
+  - DMA_RAM_DAC/stm32f30x_conf.h     Library Configuration file
+  - DMA_RAM_DAC/stm32f3xx_it.c       Interrupt handlers
+  - DMA_RAM_DAC/stm32f3xx_it.h       Header for stm32f3xx_it.c
+  - DMA_RAM_DAC/main.c               Main program
+  - DMA_RAM_DAC/main.h               Header for main.c
+  - DMA_RAM_DAC/system_stm32f30x.c   STM32F33xx system source file
+ 
+@par Hardware and Software environment
+
+  - This example has been tested with STMicroelectronics STM32F3348-DISCO board (MB1142A) 
+    and can be easily tailored to any other supported device and development board.
+ - This example runs on STM32F334xx Devices.
+    
+  - STM32F3348-DISCO Set-up
+    - Connect the oscilloscope to PA.04 and PA.05.
+            
+@par How to use it? 
+
+In order to make the program work, you must do the following :
+ + EWARM
+    - Open the DMA_RAM_DAC.eww workspace 
+    - Rebuild all files: Project->Rebuild all
+    - Load project image: Project->Debug
+    - Run program: Debug->Go(F5)
+  
+ + MDK-ARM
+    - Open the Project.uvproj project
+    - Rebuild all files: Project->Rebuild all target files
+    - Load project image: Debug->Start/Stop Debug Session
+    - Run program: Debug->Run (F5)  
+
+ + TrueSTUDIO
+    - Open the TrueSTUDIO toolchain.
+    - Click on File->Switch Workspace->Other and browse to TrueSTUDIO workspace 
+      directory.
+    - Click on File->Import, select General->'Existing Projects into Workspace' 
+      and then click "Next". 
+    - Browse to the TrueSTUDIO workspace directory and select the project "DMA_RAM_DAC" 
+    - Rebuild all project files: Select the project in the "Project explorer" 
+      window then click on Project->build project menu.
+    - Run program: Select the project in the "Project explorer" window then click 
+      Run->Debug (F11) 
+          
+ * <h3><center>&copy; COPYRIGHT STMicroelectronics</center></h3>
+ */