Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F091RC/stm32f0xx_hal_cec.h
- Revision:
- 90:cb3d968589d8
- Child:
- 93:e188a91d3eaa
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_cec.h Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,598 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 03-Oct-2014
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CEC_H
+#define __STM32F0xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) ||\
+ defined(STM32F051x8) || defined(STM32F058xx) ||\
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||\
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC CEC HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief HAL Error structures definition
+ */
+typedef enum
+{
+ HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
+ HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
+ HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
+ HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
+ HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
+ HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
+ HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
+ HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
+ HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
+ HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+}
+HAL_CEC_ErrorTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
+ ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
+ ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
+ ((MODE) == CEC_FULL_LISTENING_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization/de-initialization function
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2 IO operation function
+ * @brief CEC Transmit/Receive functions
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+