Tedd OKANO / Mbed 2 deprecated ika_shouyu_poppoyaki

this transfers data (which is stored in "bin" file in mbed storage) into LPC1114, LPC1115, LPC81x, LPC82x, LPC1768/LPC1769 and LPC11U68/LPC11E68 internal flash memory through ISP.

Dependencies:   mbed MODSERIAL DirectoryList

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. イカ醤油ポッポ焼き
  2. 用意するもの

This program programs MCU flash memory through UART. It uses "In-System Programming (ISP)" interface in target MCU (NXP LPC micro-controllers).

The ISP is done by PC and serial cable normally. The ISP protocol is executed software on a PC. The software reads a data file and transfers the data with the ISP protocol.
This program does same process of that. The mbed perform the function like "FlashMagic" and lpc21isp".
(This program not just copies the binary but also insert 4 byte checksum at address 0x1C.)

This program currently supports LPC1114FN28 (DIP28-ARM) and LPC810FN8 (DIP8-ARM).

イカ醤油ポッポ焼き

イカ醤油ポッポ焼きとは？

NXP製のマイコンは，プログラムの書き込みを

美味しい料理法

用意するもの

All wikipages