Quick hack to make NSX-39 (Poke-Miku) USB MIDI device to speak "mbed" from mbed which acts as an USB host.
Dependencies: FatFileSystem mbed
Fork of MIDI_BlueUSB by
Description of the project
This is quick hack to control Poke-miku (NSX-39) from mbed. The mbed acts as an USB host and controls USB MIDI device NSX-39. It speaks "mbed" if you send "s¥n" from virtual USB serial (connected to PC or Mac) or push SW connected to p21. It plays MIDI file "test.mid" on local file-system if you push SW connected to p22. You can find files that I have tested at the bottom. The standard MIDI file support is still preliminary. See TestShell.cpp for the hack. This program is derived from MIDI_BlueUSB (http://mbed.org/users/radiojunkbox/code/MIDI_BlueUSB/) by Radio Junk Box.
ポケミク(NSX-39)を無改造のままmbedから鳴らせるようにしてみました。mbedがUSB hostになって、USB MIDIデバイスのポケミクを鳴らします。mbedのバーチャルシリアル(USBシリアル)にPCからs\nを送るか、p21につないだスイッチを押すとmbedとしゃべります。p22につないだスイッチを押すと、ローカルファイルシステム(.binと同じ場所)に保存した test.mid を再生します。試したファイルは下にある test1.mid と test2.mid です。MIDIファイルのサポートはまだまだ完全とはいえません。
tested MIDI files
Video: Poke-miku speaks `mbed'
Diff: Utils.cpp
- Revision:
- 0:79620c558b0c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Utils.cpp Fri May 11 10:05:40 2012 +0000 @@ -0,0 +1,48 @@ + + +#include "mbed.h" +#include "Utils.h" + +void printfBytes(const char* s, const u8* data, int len) +{ + printf("%s %d:",s,len); + if (len > 256) + len = 256; + while (len-- > 0) + printf(" %02X",*data++); + printf("\n"); +} + +void printHexLine(const u8* d, int addr, int len) +{ + printf("%04X ",addr); + int i; + for (i = 0; i < len; i++) + printf("%02X ",d[i]); + for (;i < 16; i++) + printf(" "); + char s[16+1]; + memset(s,0,sizeof(s)); + for (i = 0; i < len; i++) + { + int c = d[i]; + if (c < 0x20 || c > 0x7E) + c = '.'; + s[i] = c; + } + printf("%s\n",s); +} + +void printHex(const u8* d, int len) +{ + int addr = 0; + while (len) + { + int count = len; + if (count > 16) + count = 16; + printHexLine(d+addr,addr,count); + addr += 16; + len -= count; + } +}