Diff: gen_helper.h

Revision:

0:0b32d3eaabfe

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gen_helper.h	Fri Oct 23 20:16:05 2015 +0000
@@ -0,0 +1,108 @@
+#ifndef _GEN_HELPER_H_
+#define _GEN_HELPER_H_
+
+#include "mbed.h"
+#include "SDFileSystem.h"
+
+/* Helper class for drawing onto LCD over SPI*/
+
+/*#defines for screen settings and color - based on Adafruit definitions*/
+#define SW_RESET            0x01
+#define AWAKE_SLEEPMODE     0x11
+#define NORMAL_DISP_ON      0x13
+#define INVOFF              0x20
+#define DISPLAY_ON          0x29
+#define COLUMN_ADDR_SET     0x2A
+#define ROW_ADDR_SET        0x2B
+#define WRITE_RAM           0x2C
+#define COLOR_MODE          0x3A
+#define ORIENTATION         0x36
+#define FRAMERATE_NORMAL    0xB1
+#define FRAMERATE_IDLE      0xB2
+#define FRAMERATE_PARTIAL   0xB3
+#define INVERTED_MODE_OFF   0xB4
+#define POWER_CONTROL_1     0xC0
+#define POWER_CONTROL_2     0xC1
+#define POWER_CONTROL_3     0xC2
+#define POWER_CONTROL_4     0xC3
+#define POWER_CONTROL_5     0xC4
+#define POWER_CONTROL_6     0xC5
+
+//Screen dimensions
+#define SCREEN_HEIGHT   160
+#define SCREEN_WIDTH    120
+
+
+// Color definitions
+#define BLACK   0x0000
+#define BLUE    0x001F
+#define RED     0xF800
+#define GREEN   0x07E0
+#define CYAN    0x07FF
+#define MAGENTA 0xF81F
+#define YELLOW  0xFFE0
+#define WHITE   0xFFFF
+#define SKYBLUE 0x6AFFD8
+#define BROWN   0x8B5436
+
+//hardcoded definitions for testing
+#define HOST_IP_ADDR "143.103.6.188"
+#define HOST_GATEWAY "143.103.6.254"
+#define HOST_SUBNET  "255.255.255.0"
+#define HOST_PORT     80
+
+class gen_helper
+{
+    
+public:
+
+    /* LCD function declarations */
+    int spiwrite(uint8_t c);
+    void write_spi_command(uint8_t c);
+    void write_spi_data(uint8_t c);
+    void draw_pixel(int16_t x, int16_t y, uint16_t color);
+    void lcd_init();
+    void fill_rect(int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint32_t color);
+    void write_rgb(uint32_t color, uint32_t repeat);
+    void draw_vertical_line(int16_t x, int16_t y, int16_t h, uint16_t color);
+    void draw_horizontal_line(int16_t x, int16_t y, int16_t w, uint16_t color);
+    void set_screen_coor(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1);
+    void init_console();
+    void rotate_line(float x1, float y1, float x2, float y2, uint16_t alpha, float *X, float *Y);
+    void massaged_line(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, float lambda, uint16_t colour, uint16_t *X, uint16_t *Y);
+    void drawLine(int16_t x0, int16_t y0,int16_t x1, int16_t y1,uint16_t color);
+    void draw_pattern_helper();
+    void draw_custom_pattern(int x0, int y0, int x1, int y1);
+    void draw_pattern(int x1, int y1, int x2, int y2);
+
+    /* SD card function declarations */
+    uint8_t init_disk();
+    uint8_t make_dir(char *path, uint32_t mode);
+    FILE* open_file(char *path, char *mode);
+    uint8_t close_file(FILE *fp);
+    uint8_t init_SD();
+    uint8_t remove_file(char *path);
+    
+    void decrease_screen_brightness(float);
+    void increase_screen_brightness(float);
+
+    /* CTOR ;  Use the list of pins supported at https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-rev_B-version-information*/
+    gen_helper(PinName MOSI, PinName MISO, PinName SCK, PinName CS, PinName Reset, PinName RS, PinName _USBTX, PinName _USBRX, PwmOut pwm);
+    
+    PwmOut pwm; //Backlite pin. need to be a private member and have get/set functions
+    
+private:
+    SPI lcd; /* SPI0 - MOSI, MISO, SCK  P10_14, P10_15, P10_12 */
+    DigitalOut ssel; // Chip select P10_13
+    DigitalOut reset; // Reset signal P3_15
+    DigitalOut rs; // Register select P3_14; Problem with rs pin fixed.
+    Serial console; //write to the console using serial comm
+    SDFileSystem *sd_fs; //SD card file system instance
+    
+    uint8_t colstart;
+    uint8_t rowstart;
+    uint8_t _height; //height of the lcd display
+    uint8_t _width; //width of the lcd display
+
+};
+#endif
\ No newline at end of file