ublox-cellular-driver-gen Fork

Fork of ublox-cellular-driver-gen by u-blox

Committer:
rob.meades@u-blox.com
Date:
Fri Jun 16 00:49:52 2017 +0100
Revision:
7:a9eea2dbdd68
Parent:
5:b935404dcf7c
C027 compatibility: don't check the response filename when doing a block read as teh Sara-G350 module doesn't always return it. Increase the minimum wait time for a read response and the maximum wait time as well, again 'cos Sara-G350 is not as responsive as Sara-U201.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
RobMeades 0:bb5fabac67ab 1 /* Copyright (c) 2017 ARM Limited
RobMeades 0:bb5fabac67ab 2 *
RobMeades 0:bb5fabac67ab 3 * Licensed under the Apache License, Version 2.0 (the "License");
RobMeades 0:bb5fabac67ab 4 * you may not use this file except in compliance with the License.
RobMeades 0:bb5fabac67ab 5 * You may obtain a copy of the License at
RobMeades 0:bb5fabac67ab 6 *
RobMeades 0:bb5fabac67ab 7 * http://www.apache.org/licenses/LICENSE-2.0
RobMeades 0:bb5fabac67ab 8 *
RobMeades 0:bb5fabac67ab 9 * Unless required by applicable law or agreed to in writing, software
RobMeades 0:bb5fabac67ab 10 * distributed under the License is distributed on an "AS IS" BASIS,
RobMeades 0:bb5fabac67ab 11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
RobMeades 0:bb5fabac67ab 12 * See the License for the specific language governing permissions and
RobMeades 0:bb5fabac67ab 13 * limitations under the License.
RobMeades 0:bb5fabac67ab 14 */
RobMeades 0:bb5fabac67ab 15
RobMeades 0:bb5fabac67ab 16 #ifndef _UBLOX_CELLULAR_DRIVER_GEN_
RobMeades 0:bb5fabac67ab 17 #define _UBLOX_CELLULAR_DRIVER_GEN_
RobMeades 0:bb5fabac67ab 18
rob.meades@u-blox.com 3:027c9eaec52c 19 #include "UbloxCellularBase.h"
RobMeades 0:bb5fabac67ab 20
RobMeades 0:bb5fabac67ab 21 /** UbloxCellularDriverGen class
RobMeades 0:bb5fabac67ab 22 * This interface provide SMS, USSD and
RobMeades 0:bb5fabac67ab 23 * module File System functionality.
RobMeades 0:bb5fabac67ab 24 */
RobMeades 0:bb5fabac67ab 25 class UbloxCellularDriverGen: virtual public UbloxCellularBase {
RobMeades 0:bb5fabac67ab 26
RobMeades 0:bb5fabac67ab 27 public:
RobMeades 0:bb5fabac67ab 28 /** Constructor.
RobMeades 0:bb5fabac67ab 29 *
RobMeades 0:bb5fabac67ab 30 * @param tx the UART TX data pin to which the modem is attached.
RobMeades 0:bb5fabac67ab 31 * @param rx the UART RX data pin to which the modem is attached.
RobMeades 0:bb5fabac67ab 32 * @param baud the UART baud rate.
RobMeades 0:bb5fabac67ab 33 * @param debugOn true to switch AT interface debug on, otherwise false.
RobMeades 0:bb5fabac67ab 34 */
RobMeades 0:bb5fabac67ab 35 UbloxCellularDriverGen(PinName tx = MDMTXD, PinName rx = MDMRXD,
RobMeades 0:bb5fabac67ab 36 int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
RobMeades 0:bb5fabac67ab 37 bool debugOn = false);
RobMeades 0:bb5fabac67ab 38
RobMeades 0:bb5fabac67ab 39 /* Destructor.
RobMeades 0:bb5fabac67ab 40 */
RobMeades 0:bb5fabac67ab 41 ~UbloxCellularDriverGen();
RobMeades 0:bb5fabac67ab 42
RobMeades 0:bb5fabac67ab 43 /**********************************************************************
RobMeades 0:bb5fabac67ab 44 * PUBLIC: Short Message Service
RobMeades 0:bb5fabac67ab 45 **********************************************************************/
RobMeades 0:bb5fabac67ab 46
RobMeades 0:bb5fabac67ab 47 /** The size of an SMS storage buffer, including null terminator.
RobMeades 0:bb5fabac67ab 48 */
RobMeades 0:bb5fabac67ab 49 #define SMS_BUFFER_SIZE 145
RobMeades 0:bb5fabac67ab 50
RobMeades 0:bb5fabac67ab 51 /** Count the number of messages in the device and optionally return a
RobMeades 0:bb5fabac67ab 52 * list with indexes from the storage locations in the device.
RobMeades 0:bb5fabac67ab 53 *
RobMeades 0:bb5fabac67ab 54 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 55 *
RobMeades 0:bb5fabac67ab 56 * @param stat what type of messages you can use:
RobMeades 0:bb5fabac67ab 57 * "REC UNREAD", "REC READ", "STO UNSENT", "STO SENT", "ALL".
RobMeades 0:bb5fabac67ab 58 * @param index list where to save the storage positions (pointer
RobMeades 0:bb5fabac67ab 59 * to an array of ints).
RobMeades 0:bb5fabac67ab 60 * @param num number of elements that can be stored in the list.
RobMeades 0:bb5fabac67ab 61 * @return the number of messages, this can be bigger than num,
RobMeades 0:bb5fabac67ab 62 * -1 on failure.
RobMeades 0:bb5fabac67ab 63 */
RobMeades 0:bb5fabac67ab 64 int smsList(const char* stat = "ALL", int* index = NULL, int num = 0);
RobMeades 0:bb5fabac67ab 65
RobMeades 0:bb5fabac67ab 66 /** Read a message from a storage position.
RobMeades 0:bb5fabac67ab 67 *
RobMeades 0:bb5fabac67ab 68 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 69 *
RobMeades 0:bb5fabac67ab 70 * @param index the storage position to read.
RobMeades 0:bb5fabac67ab 71 * @param num the originator address (16 chars including terminator).
RobMeades 0:bb5fabac67ab 72 * @param buf a buffer where to save the short message.
RobMeades 0:bb5fabac67ab 73 * @param len the length of buf.
RobMeades 0:bb5fabac67ab 74 * @return true if successful, false otherwise.
RobMeades 0:bb5fabac67ab 75 */
RobMeades 0:bb5fabac67ab 76 bool smsRead(int index, char* num, char* buf, int len);
RobMeades 0:bb5fabac67ab 77
RobMeades 0:bb5fabac67ab 78 /** Delete a message.
RobMeades 0:bb5fabac67ab 79 *
RobMeades 0:bb5fabac67ab 80 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 81 *
RobMeades 0:bb5fabac67ab 82 * @param index the storage position to delete.
RobMeades 0:bb5fabac67ab 83 * @return true if successful, false otherwise.
RobMeades 0:bb5fabac67ab 84 */
RobMeades 0:bb5fabac67ab 85 bool smsDelete(int index);
RobMeades 0:bb5fabac67ab 86
RobMeades 0:bb5fabac67ab 87 /** Send a message to a recipient.
RobMeades 0:bb5fabac67ab 88 *
RobMeades 0:bb5fabac67ab 89 * Note: init() and nwk_registration() should be called before
RobMeades 0:bb5fabac67ab 90 * this method can be used.
RobMeades 0:bb5fabac67ab 91 *
RobMeades 0:bb5fabac67ab 92 * @param num the phone number of the recipient as a null terminated
RobMeades 0:bb5fabac67ab 93 * string. Note: no spaces are allowed in this string.
RobMeades 0:bb5fabac67ab 94 * @param buf the content of the message to sent, null terminated.
RobMeades 0:bb5fabac67ab 95 * @return true if successful, false otherwise.
RobMeades 0:bb5fabac67ab 96 */
RobMeades 0:bb5fabac67ab 97 bool smsSend(const char* num, const char* buf);
RobMeades 0:bb5fabac67ab 98
RobMeades 0:bb5fabac67ab 99 /**********************************************************************
RobMeades 0:bb5fabac67ab 100 * PUBLIC: Unstructured Supplementary Service Data
RobMeades 0:bb5fabac67ab 101 **********************************************************************/
RobMeades 0:bb5fabac67ab 102
RobMeades 0:bb5fabac67ab 103 /** The maximum size of a USSD string (not including terminator).
RobMeades 0:bb5fabac67ab 104 */
RobMeades 0:bb5fabac67ab 105 #define USSD_STRING_LENGTH 128
RobMeades 0:bb5fabac67ab 106
RobMeades 0:bb5fabac67ab 107 /** Make a USSD query.
RobMeades 0:bb5fabac67ab 108 *
RobMeades 0:bb5fabac67ab 109 * Note: init() should be called before using this method can be
RobMeades 0:bb5fabac67ab 110 * used and, in many cases, nwk_registration() is also required as
RobMeades 0:bb5fabac67ab 111 * the USSD may need network access.
RobMeades 0:bb5fabac67ab 112 *
RobMeades 0:bb5fabac67ab 113 * Note: some USSD commands relate to call waiting, call forwarding,
RobMeades 0:bb5fabac67ab 114 * etc., which can result in multiple responses. This function returns
RobMeades 0:bb5fabac67ab 115 * only the first response. Instantiate this class with debugOn set to
RobMeades 0:bb5fabac67ab 116 * true to get a better view of what is really going on. If such
RobMeades 0:bb5fabac67ab 117 * responses are important to you, you should subclass this class and
RobMeades 0:bb5fabac67ab 118 * parse for them specifically and, probably, use specific AT commands
RobMeades 0:bb5fabac67ab 119 * rather than USSD.
RobMeades 0:bb5fabac67ab 120 *
RobMeades 0:bb5fabac67ab 121 * @param cmd the USSD string to send e.g "*#100#".
RobMeades 0:bb5fabac67ab 122 * @param buf a buffer where to save the reply, which
RobMeades 0:bb5fabac67ab 123 * will always be returned zero terminated.
RobMeades 0:bb5fabac67ab 124 * @param len the length of buf, set to USSD_STRING_LENGTH + 1 to
RobMeades 0:bb5fabac67ab 125 * obtain the maximum length response plus terminator.
RobMeades 0:bb5fabac67ab 126 * @return true if successful, false otherwise.
RobMeades 0:bb5fabac67ab 127 */
RobMeades 0:bb5fabac67ab 128 bool ussdCommand(const char* cmd, char* buf, int len);
RobMeades 0:bb5fabac67ab 129
RobMeades 0:bb5fabac67ab 130 /**********************************************************************
RobMeades 0:bb5fabac67ab 131 * PUBLIC: Module File System
RobMeades 0:bb5fabac67ab 132 **********************************************************************/
RobMeades 0:bb5fabac67ab 133
RobMeades 0:bb5fabac67ab 134 /** Delete a file from the module's local file system. An attempt
RobMeades 0:bb5fabac67ab 135 * to delete a non-existent file will fail.
RobMeades 0:bb5fabac67ab 136 *
RobMeades 0:bb5fabac67ab 137 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 138 *
RobMeades 0:bb5fabac67ab 139 * @param filename the name of the file.
RobMeades 0:bb5fabac67ab 140 * @return true if successful, false otherwise.
RobMeades 0:bb5fabac67ab 141 */
RobMeades 0:bb5fabac67ab 142 bool delFile(const char* filename);
RobMeades 0:bb5fabac67ab 143
RobMeades 0:bb5fabac67ab 144 /** Write some data to a file in the module's local file system.
RobMeades 0:bb5fabac67ab 145 *
RobMeades 0:bb5fabac67ab 146 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 147 *
RobMeades 0:bb5fabac67ab 148 * @param filename the name of the file.
RobMeades 0:bb5fabac67ab 149 * @param buf the data to write.
RobMeades 0:bb5fabac67ab 150 * @param len the size of the data to write.
RobMeades 0:bb5fabac67ab 151 * @return the number of bytes written.
RobMeades 0:bb5fabac67ab 152 */
RobMeades 0:bb5fabac67ab 153 int writeFile(const char* filename, const char* buf, int len);
RobMeades 0:bb5fabac67ab 154
RobMeades 0:bb5fabac67ab 155 /** Read a file from the module's local file system.
RobMeades 0:bb5fabac67ab 156 *
RobMeades 0:bb5fabac67ab 157 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 158 *
RobMeades 0:bb5fabac67ab 159 * @param filename the name of the file
RobMeades 0:bb5fabac67ab 160 * @param buf a buffer to hold the data
RobMeades 0:bb5fabac67ab 161 * @param len the size to read
RobMeades 0:bb5fabac67ab 162 * @return the number of bytes read
RobMeades 0:bb5fabac67ab 163 */
RobMeades 0:bb5fabac67ab 164 int readFile(const char* filename, char* buf, int len);
RobMeades 0:bb5fabac67ab 165
RobMeades 0:bb5fabac67ab 166 /** Retrieve the file size from the module's local file system.
RobMeades 0:bb5fabac67ab 167 *
RobMeades 0:bb5fabac67ab 168 * Note: init() should be called before this method can be used.
RobMeades 0:bb5fabac67ab 169 *
RobMeades 0:bb5fabac67ab 170 * @param filename the name of the file.
RobMeades 0:bb5fabac67ab 171 * @return the file size in bytes.
RobMeades 0:bb5fabac67ab 172 */
RobMeades 0:bb5fabac67ab 173 int fileSize(const char* filename);
RobMeades 0:bb5fabac67ab 174
RobMeades 0:bb5fabac67ab 175 protected:
RobMeades 0:bb5fabac67ab 176
RobMeades 0:bb5fabac67ab 177 /**********************************************************************
RobMeades 0:bb5fabac67ab 178 * PROTECTED: Short Message Service
RobMeades 0:bb5fabac67ab 179 **********************************************************************/
RobMeades 0:bb5fabac67ab 180
RobMeades 0:bb5fabac67ab 181 /** The number type for telephone numbers without a + on the front
RobMeades 0:bb5fabac67ab 182 */
RobMeades 0:bb5fabac67ab 183 #define TYPE_OF_ADDRESS_NATIONAL 129
RobMeades 0:bb5fabac67ab 184
RobMeades 0:bb5fabac67ab 185 /** The number type for telephone numbers with a + on the front
RobMeades 0:bb5fabac67ab 186 */
RobMeades 0:bb5fabac67ab 187 #define TYPE_OF_ADDRESS_INTERNATIONAL 145
RobMeades 0:bb5fabac67ab 188
RobMeades 0:bb5fabac67ab 189 /** Convert a #define to a string
RobMeades 0:bb5fabac67ab 190 */
RobMeades 0:bb5fabac67ab 191 #define stringify(a) str(a)
RobMeades 0:bb5fabac67ab 192 #define str(a) #a
RobMeades 0:bb5fabac67ab 193
RobMeades 0:bb5fabac67ab 194 /** Place to store the index of an SMS message.
RobMeades 0:bb5fabac67ab 195 */
RobMeades 0:bb5fabac67ab 196 int *_userSmsIndex;
RobMeades 0:bb5fabac67ab 197
RobMeades 0:bb5fabac67ab 198 /** The number of SMS message being returned to the user.
RobMeades 0:bb5fabac67ab 199 */
RobMeades 0:bb5fabac67ab 200 int _userSmsNum;
RobMeades 0:bb5fabac67ab 201
RobMeades 0:bb5fabac67ab 202 /** The number of SMS messages stored in the module.
RobMeades 0:bb5fabac67ab 203 */
RobMeades 0:bb5fabac67ab 204 int _smsCount;
RobMeades 0:bb5fabac67ab 205
RobMeades 0:bb5fabac67ab 206 /** Temporary storage for an SMS message.
RobMeades 0:bb5fabac67ab 207 */
RobMeades 0:bb5fabac67ab 208 char _smsBuf[SMS_BUFFER_SIZE];
RobMeades 0:bb5fabac67ab 209
RobMeades 0:bb5fabac67ab 210 /** URC for Short Message listing.
RobMeades 0:bb5fabac67ab 211 */
RobMeades 0:bb5fabac67ab 212 void CMGL_URC();
RobMeades 0:bb5fabac67ab 213
RobMeades 0:bb5fabac67ab 214 /** URC for new SMS messages.
RobMeades 0:bb5fabac67ab 215 */
RobMeades 0:bb5fabac67ab 216 void CMTI_URC();
RobMeades 0:bb5fabac67ab 217
RobMeades 0:bb5fabac67ab 218 /**********************************************************************
RobMeades 0:bb5fabac67ab 219 * PROTECTED: Unstructured Supplementary Service Data
RobMeades 0:bb5fabac67ab 220 **********************************************************************/
RobMeades 0:bb5fabac67ab 221
RobMeades 0:bb5fabac67ab 222 /** A buffer for the string assembled from the URC.
RobMeades 0:bb5fabac67ab 223 */
RobMeades 0:bb5fabac67ab 224 char * _ssUrcBuf;
RobMeades 0:bb5fabac67ab 225
rob.meades@u-blox.com 5:b935404dcf7c 226 /** URC for USSD.
rob.meades@u-blox.com 5:b935404dcf7c 227 */
rob.meades@u-blox.com 5:b935404dcf7c 228 void CUSD_URC();
rob.meades@u-blox.com 5:b935404dcf7c 229
RobMeades 0:bb5fabac67ab 230 /** URC for call waiting.
RobMeades 0:bb5fabac67ab 231 */
RobMeades 0:bb5fabac67ab 232 void CCWA_URC();
RobMeades 0:bb5fabac67ab 233
RobMeades 0:bb5fabac67ab 234 /** URC for call forwarding.
RobMeades 0:bb5fabac67ab 235 */
RobMeades 0:bb5fabac67ab 236 void CCFC_URC();
RobMeades 0:bb5fabac67ab 237
RobMeades 0:bb5fabac67ab 238 /** URC for calling lined ID restriction.
RobMeades 0:bb5fabac67ab 239 */
RobMeades 0:bb5fabac67ab 240 void CLIR_URC();
RobMeades 0:bb5fabac67ab 241
RobMeades 0:bb5fabac67ab 242 /** URC for calling lined ID presentation.
RobMeades 0:bb5fabac67ab 243 */
RobMeades 0:bb5fabac67ab 244 void CLIP_URC();
RobMeades 0:bb5fabac67ab 245
RobMeades 0:bb5fabac67ab 246 /** URC for connected lined ID restriction.
RobMeades 0:bb5fabac67ab 247 */
RobMeades 0:bb5fabac67ab 248 void COLR_URC();
RobMeades 0:bb5fabac67ab 249
RobMeades 0:bb5fabac67ab 250 /** URC for connected lined ID presentation.
RobMeades 0:bb5fabac67ab 251 */
RobMeades 0:bb5fabac67ab 252 void COLP_URC();
RobMeades 0:bb5fabac67ab 253
RobMeades 0:bb5fabac67ab 254 /**********************************************************************
RobMeades 0:bb5fabac67ab 255 * PROTECTED: File System
RobMeades 0:bb5fabac67ab 256 **********************************************************************/
RobMeades 0:bb5fabac67ab 257
RobMeades 0:bb5fabac67ab 258 /** The maximum size of a single read of file data.
RobMeades 0:bb5fabac67ab 259 * Note: this should be no larger than BUFFERED_SERIAL_RXBUF_SIZE
RobMeades 0:bb5fabac67ab 260 * (which defaults to 256) minus some margin for the AT command
RobMeades 0:bb5fabac67ab 261 * stuff that precedes it (which includes the filename). A good
RobMeades 0:bb5fabac67ab 262 * number is 192. If you want to use something bigger then add an
RobMeades 0:bb5fabac67ab 263 * entry to the target_overrides section of your mbed_app.json of the
RobMeades 0:bb5fabac67ab 264 * following form:
RobMeades 0:bb5fabac67ab 265 *
RobMeades 0:bb5fabac67ab 266 * "platform.buffered-serial-rxbuf-size": 1024
RobMeades 0:bb5fabac67ab 267 */
RobMeades 0:bb5fabac67ab 268
RobMeades 0:bb5fabac67ab 269 #define FILE_BUFFER_SIZE 192
RobMeades 0:bb5fabac67ab 270 };
RobMeades 0:bb5fabac67ab 271
RobMeades 0:bb5fabac67ab 272 #endif // _UBLOX_CELLULAR_DRIVER_GEN_
RobMeades 0:bb5fabac67ab 273