mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.
Fork of mbed-dev by
Tested and working:
- blink
- system frequency 24Mhz (with external xtal 8Mhz)
- stdio uart on pins PA_2-PA_3
- Serial on pins PA_9-PA_10
- AnalogOut on pins PA_4, PA_5 (DAC)
- AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5
Notes:
- TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )
Simple test program:Import programtestF100R6
simple tests for STM32F100R6 microcontroller with dedicated library
Diff: api/AnalogIn.h
- Revision:
- 0:9b334a45a8ff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/api/AnalogIn.h Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,103 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_ANALOGIN_H +#define MBED_ANALOGIN_H + +#include "platform.h" + +#if DEVICE_ANALOGIN + +#include "analogin_api.h" + +namespace mbed { + +/** An analog input, used for reading the voltage on a pin + * + * Example: + * @code + * // Print messages when the AnalogIn is greater than 50% + * + * #include "mbed.h" + * + * AnalogIn temperature(p20); + * + * int main() { + * while(1) { + * if(temperature > 0.5) { + * printf("Too hot! (%f)", temperature.read()); + * } + * } + * } + * @endcode + */ +class AnalogIn { + +public: + + /** Create an AnalogIn, connected to the specified pin + * + * @param pin AnalogIn pin to connect to + * @param name (optional) A string to identify the object + */ + AnalogIn(PinName pin) { + analogin_init(&_adc, pin); + } + + /** Read the input voltage, represented as a float in the range [0.0, 1.0] + * + * @returns A floating-point value representing the current input voltage, measured as a percentage + */ + float read() { + return analogin_read(&_adc); + } + + /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF] + * + * @returns + * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value + */ + unsigned short read_u16() { + return analogin_read_u16(&_adc); + } + +#ifdef MBED_OPERATORS + /** An operator shorthand for read() + * + * The float() operator can be used as a shorthand for read() to simplify common code sequences + * + * Example: + * @code + * float x = volume.read(); + * float x = volume; + * + * if(volume.read() > 0.25) { ... } + * if(volume > 0.25) { ... } + * @endcode + */ + operator float() { + return read(); + } +#endif + +protected: + analogin_t _adc; +}; + +} // namespace mbed + +#endif + +#endif