File content as of revision 635:a11c0372f0ba:

/* File: startup_ARMCM3.s
 * Purpose: startup file for Cortex-M3/M4 devices. Should use with 
 *   GNU Tools for ARM Embedded Processors
 * Version: V1.1
 * Date: 17 June 2011
 * 
 * Copyright (C) 2011 ARM Limited. All rights reserved.
 * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 
 * processor based microcontrollers.  This file can be freely distributed 
 * within development tools that are supporting such ARM based processors. 
 *
 * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
 * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
 * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 */
    .syntax unified
    .arch armv7-m

/* Memory Model
   The HEAP starts at the end of the DATA section and grows upward.
   
   The STACK starts at the end of the RAM and grows downward.
   
   The HEAP and stack STACK are only checked at compile time:
   (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
   
   This is just a check for the bare minimum for the Heap+Stack area before
   aborting compilation, it is not the run time limit:
   Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
 */
    .section .stack
    .align 3
#ifdef __STACK_SIZE
    .equ    Stack_Size, __STACK_SIZE
#else
    .equ    Stack_Size, 0xc00
#endif
    .globl    __StackTop
    .globl    __StackLimit
__StackLimit:
    .space    Stack_Size
    .size __StackLimit, . - __StackLimit
__StackTop:
    .size __StackTop, . - __StackTop

    .section .heap
    .align 3
#ifdef __HEAP_SIZE
    .equ    Heap_Size, __HEAP_SIZE
#else
    .equ    Heap_Size, 0x800
#endif
    .globl    __HeapBase
    .globl    __HeapLimit
__HeapBase:
    .space    Heap_Size
    .size __HeapBase, . - __HeapBase
__HeapLimit:
    .size __HeapLimit, . - __HeapLimit
    
    .section .isr_vector
    .align 2
    .globl __isr_vector
__isr_vector:
    .long    __StackTop            /* Top of Stack */
    .long    Reset_Handler         /* Reset Handler */
    .long    NMI_Handler           /* NMI Handler */
    .long    HardFault_Handler     /* Hard Fault Handler */
    .long    MemManage_Handler     /* MPU Fault Handler */
    .long    BusFault_Handler      /* Bus Fault Handler */
    .long    UsageFault_Handler    /* Usage Fault Handler */
    .long    0                     /* Reserved */
    .long    0                     /* Reserved */
    .long    0                     /* Reserved */
    .long    0                     /* Reserved */
    .long    SVC_Handler           /* SVCall Handler */
    .long    DebugMon_Handler      /* Debug Monitor Handler */
    .long    0                     /* Reserved */
    .long    PendSV_Handler        /* PendSV Handler */
    .long    SysTick_Handler       /* SysTick Handler */

    /* External interrupts */
    .long   WDT_IRQHandler              /* 16: Watchdog Timer               */
    .long   TIMER0_IRQHandler           /* 17: Timer0                       */
    .long   TIMER1_IRQHandler           /* 18: Timer1                       */
    .long   TIMER2_IRQHandler           /* 19: Timer2                       */
    .long   TIMER3_IRQHandler           /* 20: Timer3                       */
    .long   UART0_IRQHandler            /* 21: UART0                        */
    .long   UART1_IRQHandler            /* 22: UART1                        */
    .long   UART2_IRQHandler            /* 23: UART2                        */
    .long   UART3_IRQHandler            /* 24: UART3                        */
    .long   PWM1_IRQHandler             /* 25: PWM1                         */
    .long   I2C0_IRQHandler             /* 26: I2C0                         */
    .long   I2C1_IRQHandler             /* 27: I2C1                         */
    .long   I2C2_IRQHandler             /* 28: I2C2                         */
    .long   SPI_IRQHandler              /* 29: SPI                          */
    .long   SSP0_IRQHandler             /* 30: SSP0                         */
    .long   SSP1_IRQHandler             /* 31: SSP1                         */
    .long   PLL0_IRQHandler             /* 32: PLL0 Lock (Main PLL)         */
    .long   RTC_IRQHandler              /* 33: Real Time Clock              */
    .long   EINT0_IRQHandler            /* 34: External Interrupt 0         */
    .long   EINT1_IRQHandler            /* 35: External Interrupt 1         */
    .long   EINT2_IRQHandler            /* 36: External Interrupt 2         */
    .long   EINT3_IRQHandler            /* 37: External Interrupt 3         */
    .long   ADC_IRQHandler              /* 38: A/D Converter                */
    .long   BOD_IRQHandler              /* 39: Brown-Out Detect             */
    .long   USB_IRQHandler              /* 40: USB                          */
    .long   CAN_IRQHandler              /* 41: CAN                          */
    .long   DMA_IRQHandler              /* 42: General Purpose DMA          */
    .long   I2S_IRQHandler              /* 43: I2S                          */
    .long   ENET_IRQHandler             /* 44: Ethernet                     */
    .long   RIT_IRQHandler              /* 45: Repetitive Interrupt Timer   */
    .long   MCPWM_IRQHandler            /* 46: Motor Control PWM            */
    .long   QEI_IRQHandler              /* 47: Quadrature Encoder Interface */
    .long   PLL1_IRQHandler             /* 48: PLL1 Lock (USB PLL)          */
    .long   USBActivity_IRQHandler      /* 49: USB Activity                 */
    .long   CANActivity_IRQHandler      /* 50: CAN Activity                 */

    .size    __isr_vector, . - __isr_vector

    .text
    .thumb
    .thumb_func
    .align 2
    .globl    Reset_Handler
    .type    Reset_Handler, %function
Reset_Handler:
/*     Loop to copy data from read only memory to RAM. The ranges
 *      of copy from/to are specified by following symbols evaluated in 
 *      linker script.
 *      _etext: End of code section, i.e., begin of data sections to copy from.
 *      __data_start__/__data_end__: RAM address range that data should be
 *      copied to. Both must be aligned to 4 bytes boundary.  */

    ldr    r1, =__etext
    ldr    r2, =__data_start__
    ldr    r3, =__data_end__

.Lflash_to_ram_loop:
    cmp     r2, r3
    ittt    lt
    ldrlt   r0, [r1], #4
    strlt   r0, [r2], #4
    blt    .Lflash_to_ram_loop

    ldr    r0, =SystemInit
    blx    r0
    ldr    r0, =_start
    bx    r0
    .pool
    .size Reset_Handler, . - Reset_Handler
    
    .text
/*    Macro to define default handlers. Default handler
 *    will be weak symbol and just dead loops. They can be
 *    overwritten by other handlers */
    .macro    def_default_handler    handler_name
    .align 1
    .thumb_func
    .weak    \handler_name
    .type    \handler_name, %function
\handler_name :
    b    .
    .size    \handler_name, . - \handler_name
    .endm

    def_default_handler    NMI_Handler
    def_default_handler    HardFault_Handler
    def_default_handler    MemManage_Handler
    def_default_handler    BusFault_Handler
    def_default_handler    UsageFault_Handler
    def_default_handler    SVC_Handler
    def_default_handler    DebugMon_Handler
    def_default_handler    PendSV_Handler
    def_default_handler    SysTick_Handler
    def_default_handler    Default_Handler

    .macro    def_irq_default_handler    handler_name
    .weak     \handler_name
    .set      \handler_name, Default_Handler
    .endm
 
    def_irq_default_handler     WDT_IRQHandler
    def_irq_default_handler     TIMER0_IRQHandler
    def_irq_default_handler     TIMER1_IRQHandler
    def_irq_default_handler     TIMER2_IRQHandler
    def_irq_default_handler     TIMER3_IRQHandler
    def_irq_default_handler     UART0_IRQHandler
    def_irq_default_handler     UART1_IRQHandler
    def_irq_default_handler     UART2_IRQHandler
    def_irq_default_handler     UART3_IRQHandler
    def_irq_default_handler     PWM1_IRQHandler
    def_irq_default_handler     I2C0_IRQHandler
    def_irq_default_handler     I2C1_IRQHandler
    def_irq_default_handler     I2C2_IRQHandler
    def_irq_default_handler     SPI_IRQHandler
    def_irq_default_handler     SSP0_IRQHandler
    def_irq_default_handler     SSP1_IRQHandler
    def_irq_default_handler     PLL0_IRQHandler
    def_irq_default_handler     RTC_IRQHandler
    def_irq_default_handler     EINT0_IRQHandler
    def_irq_default_handler     EINT1_IRQHandler
    def_irq_default_handler     EINT2_IRQHandler
    def_irq_default_handler     EINT3_IRQHandler
    def_irq_default_handler     ADC_IRQHandler
    def_irq_default_handler     BOD_IRQHandler
    def_irq_default_handler     USB_IRQHandler
    def_irq_default_handler     CAN_IRQHandler
    def_irq_default_handler     DMA_IRQHandler
    def_irq_default_handler     I2S_IRQHandler
    def_irq_default_handler     ENET_IRQHandler
    def_irq_default_handler     RIT_IRQHandler
    def_irq_default_handler     MCPWM_IRQHandler
    def_irq_default_handler     QEI_IRQHandler
    def_irq_default_handler     PLL1_IRQHandler
    def_irq_default_handler     USBActivity_IRQHandler
    def_irq_default_handler     CANActivity_IRQHandler
    def_irq_default_handler     DEF_IRQHandler

    .end