mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_NXP/TARGET_LPC43XX/TARGET_LPC4330/PinNames.h
- Committer:
- Anna Bridge
- Date:
- 2017-05-10
- Revision:
- 164:289d4deac6e4
- Parent:
- 149:156823d33999
File content as of revision 164:289d4deac6e4:
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
#define PORT_SHIFT 5
#define NO_GPIO 15
#define NO_PORT 0xFF
// On the LPC43xx the MCU pin name and the GPIO pin name are not the same.
// Encode SCU and GPIO offsets as a pin identifier
#define MBED_PIN(group, num, port, pin) ((SCU_OFF(group,num) << 16) + GPIO_OFF(port,pin))
// Decode pin identifier into register, port and pin values
#define MBED_SCU_REG(MBED_PIN) (LPC_SCU_BASE + (MBED_PIN >> 16))
#define MBED_GPIO_REG(MBED_PIN) (LPC_GPIO_PORT_BASE + 0x2000 + ((MBED_PIN >> (PORT_SHIFT - 2)) & 0x0000003C))
#define MBED_GPIO_PORT(MBED_PIN) ((MBED_PIN >> PORT_SHIFT) & 0x0000000F)
#define MBED_GPIO_PIN(MBED_PIN) (MBED_PIN & 0x0000001F)
typedef enum {
// LPC43xx Pin Names
// All pins defined. Package determines which are available.
// LBGA256 TFBGA180 TFBGA100 LQFP208 LQFP144
// GPIO0 [15:0] [15:0] [15:6] [15:0] [15:0]
// [4:0]
// GPIO1 [15:0] [15:0] [15:0] [15:0] [15:0]
// GPIO2 [15:0] [15:0] [15:0] [15:0]
// GPIO3 [15:0] [15:0] [7] [15:0] [15:0]
// [5:3]
// [1:0]
// GPIO4 [15:0] [15:0] [15:0] [11]
// GPIO5 [26:0] [26:0] [11:0] [25:0] [18]
// [16:0]
// GPIO6 [30:0] [30:28] [30:20]
// [26:25] [5:0]
// GPIO7 [25:0] [4:0] [25:23]
// [21:17]
// --- --- --- --- ---
// Total 164 117 49 131 83
// Groups 0x00 - 0x0F : Digital pins
// * Digital pins support up to 8 functions
// Use func=0 for GPIO0-GPIO4, func=4 for GPIO5-GPIO7
// * High-drive pins default to 4 mA but can support 8, 14, 20 mA
P0_0 = MBED_PIN(0x00, 0, 0, 0), // GPIO0[0]
P0_1 = MBED_PIN(0x00, 1, 0, 1), // GPIO0[1]
P1_0 = MBED_PIN(0x01, 0, 0, 4), // GPIO0[4]
P1_1 = MBED_PIN(0x01, 1, 0, 8), // GPIO0[8]
P1_2 = MBED_PIN(0x01, 2, 0, 9), // GPIO0[9]
P1_3 = MBED_PIN(0x01, 3, 0, 10), // GPIO0[10]
P1_4 = MBED_PIN(0x01, 4, 0, 11), // GPIO0[11]
P1_5 = MBED_PIN(0x01, 5, 1, 8), // GPIO1[8]
P1_6 = MBED_PIN(0x01, 6, 1, 9), // GPIO1[9]
P1_7 = MBED_PIN(0x01, 7, 1, 0), // GPIO1[0]
P1_8 = MBED_PIN(0x01, 8, 1, 1), // GPIO1[1]
P1_9 = MBED_PIN(0x01, 9, 1, 2), // GPIO1[2]
P1_10 = MBED_PIN(0x01, 10, 1, 3), // GPIO1[3]
P1_11 = MBED_PIN(0x01, 11, 1, 4), // GPIO1[4]
P1_12 = MBED_PIN(0x01, 12, 1, 5), // GPIO1[5]
P1_13 = MBED_PIN(0x01, 13, 1, 6), // GPIO1[6]
P1_14 = MBED_PIN(0x01, 14, 1, 7), // GPIO1[7]
P1_15 = MBED_PIN(0x01, 15, 0, 2), // GPIO0[2]
P1_16 = MBED_PIN(0x01, 16, 0, 3), // GPIO0[3]
P1_17 = MBED_PIN(0x01, 17, 0, 12), // GPIO0[12] high-drive
P1_18 = MBED_PIN(0x01, 18, 0, 13), // GPIO0[13]
P1_19 = MBED_PIN(0x01, 19, NO_GPIO, 0),
P1_20 = MBED_PIN(0x01, 20, 0, 15), // GPIO0[15]
P2_0 = MBED_PIN(0x02, 0, 5, 0), // GPIO5[0]
P2_1 = MBED_PIN(0x02, 1, 5, 1), // GPIO5[1]
P2_2 = MBED_PIN(0x02, 2, 5, 2), // GPIO5[2]
P2_3 = MBED_PIN(0x02, 3, 5, 3), // GPIO5[3] high-drive
P2_4 = MBED_PIN(0x02, 4, 5, 4), // GPIO5[4] high-drive
P2_5 = MBED_PIN(0x02, 5, 5, 5), // GPIO5[5] high-drive
P2_6 = MBED_PIN(0x02, 6, 5, 6), // GPIO5[6]
P2_7 = MBED_PIN(0x02, 7, 0, 7), // GPIO0[7]
P2_8 = MBED_PIN(0x02, 8, 5, 7), // GPIO5[7]
P2_9 = MBED_PIN(0x02, 9, 1, 10), // GPIO1[10]
P2_10 = MBED_PIN(0x02, 10, 0, 14), // GPIO0[14]
P2_11 = MBED_PIN(0x02, 11, 1, 11), // GPIO1[11]
P2_12 = MBED_PIN(0x02, 12, 1, 12), // GPIO1[12]
P2_13 = MBED_PIN(0x02, 13, 1, 13), // GPIO1[13]
P3_0 = MBED_PIN(0x03, 0, NO_GPIO, 0),
P3_1 = MBED_PIN(0x03, 1, 5, 8), // GPIO5[8]
P3_2 = MBED_PIN(0x03, 2, 5, 9), // GPIO5[9]
P3_3 = MBED_PIN(0x03, 3, NO_GPIO, 0),
P3_4 = MBED_PIN(0x03, 4, 1, 14), // GPIO1[14]
P3_5 = MBED_PIN(0x03, 5, 1, 15), // GPIO1[15]
P3_6 = MBED_PIN(0x03, 6, 0, 6), // GPIO0[6]
P3_7 = MBED_PIN(0x03, 7, 5, 10), // GPIO5[10]
P3_8 = MBED_PIN(0x03, 8, 5, 11), // GPIO5[11]
P4_0 = MBED_PIN(0x04, 0, 2, 0), // GPIO2[0]
P4_1 = MBED_PIN(0x04, 1, 2, 1), // GPIO2[1]
P4_2 = MBED_PIN(0x04, 2, 2, 2), // GPIO2[2]
P4_3 = MBED_PIN(0x04, 3, 2, 3), // GPIO2[3]
P4_4 = MBED_PIN(0x04, 4, 2, 4), // GPIO2[4]
P4_5 = MBED_PIN(0x04, 5, 2, 5), // GPIO2[5]
P4_6 = MBED_PIN(0x04, 6, 2, 6), // GPIO2[6]
P4_7 = MBED_PIN(0x04, 7, NO_GPIO, 0),
P4_8 = MBED_PIN(0x04, 8, 5, 12), // GPIO5[12]
P4_9 = MBED_PIN(0x04, 9, 5, 13), // GPIO5[13]
P4_10 = MBED_PIN(0x04, 10, 5, 14), // GPIO5[14]
P5_0 = MBED_PIN(0x05, 0, 2, 9), // GPIO2[9]
P5_1 = MBED_PIN(0x05, 1, 2, 10), // GPIO2[10]
P5_2 = MBED_PIN(0x05, 2, 2, 11), // GPIO2[11]
P5_3 = MBED_PIN(0x05, 3, 2, 12), // GPIO2[12]
P5_4 = MBED_PIN(0x05, 4, 2, 13), // GPIO2[13]
P5_5 = MBED_PIN(0x05, 5, 2, 14), // GPIO2[14]
P5_6 = MBED_PIN(0x05, 6, 2, 15), // GPIO2[15]
P5_7 = MBED_PIN(0x05, 7, 2, 7), // GPIO2[7]
P6_0 = MBED_PIN(0x06, 0, NO_GPIO, 0),
P6_1 = MBED_PIN(0x06, 1, 3, 0), // GPIO3[0]
P6_2 = MBED_PIN(0x06, 2, 3, 1), // GPIO3[1]
P6_3 = MBED_PIN(0x06, 3, 3, 2), // GPIO3[2]
P6_4 = MBED_PIN(0x06, 4, 3, 3), // GPIO3[3]
P6_5 = MBED_PIN(0x06, 5, 3, 4), // GPIO3[4]
P6_6 = MBED_PIN(0x06, 6, 0, 5), // GPIO0[5]
P6_7 = MBED_PIN(0x06, 7, 5, 15), // GPIO5[15]
P6_8 = MBED_PIN(0x06, 8, 5, 16), // GPIO5[16]
P6_9 = MBED_PIN(0x06, 9, 3, 5), // GPIO3[5]
P6_10 = MBED_PIN(0x06, 10, 3, 6), // GPIO3[6]
P6_11 = MBED_PIN(0x06, 11, 3, 7), // GPIO3[7]
P6_12 = MBED_PIN(0x06, 12, 2, 8), // GPIO2[8]
P7_0 = MBED_PIN(0x07, 0, 3, 8), // GPIO3[8]
P7_1 = MBED_PIN(0x07, 1, 3, 9), // GPIO3[9]
P7_2 = MBED_PIN(0x07, 2, 3, 10), // GPIO3[10]
P7_3 = MBED_PIN(0x07, 3, 3, 11), // GPIO3[11]
P7_4 = MBED_PIN(0x07, 4, 3, 12), // GPIO3[12]
P7_5 = MBED_PIN(0x07, 5, 3, 13), // GPIO3[13]
P7_6 = MBED_PIN(0x07, 6, 3, 14), // GPIO3[14]
P7_7 = MBED_PIN(0x07, 7, 3, 15), // GPIO3[15]
P8_0 = MBED_PIN(0x08, 8, 4, 0), // GPIO4[0] high-drive
P8_1 = MBED_PIN(0x09, 0, 4, 1), // GPIO4[1] high-drive
P8_2 = MBED_PIN(0x09, 1, 4, 2), // GPIO4[2] high-drive
P8_3 = MBED_PIN(0x09, 2, 4, 3), // GPIO4[3]
P8_4 = MBED_PIN(0x08, 4, 4, 4), // GPIO4[4]
P8_5 = MBED_PIN(0x08, 5, 4, 5), // GPIO4[5]
P8_6 = MBED_PIN(0x08, 6, 4, 6), // GPIO4[6]
P8_7 = MBED_PIN(0x08, 7, 4, 7), // GPIO4[7]
P8_8 = MBED_PIN(0x08, 8, NO_GPIO, 0),
P9_0 = MBED_PIN(0x09, 0, 4, 12), // GPIO4[12]
P9_1 = MBED_PIN(0x09, 1, 4, 13), // GPIO4[13]
P9_2 = MBED_PIN(0x09, 2, 4, 14), // GPIO4[14]
P9_3 = MBED_PIN(0x09, 3, 4, 15), // GPIO4[15]
P9_4 = MBED_PIN(0x09, 4, 5, 17), // GPIO5[17]
P9_5 = MBED_PIN(0x09, 5, 5, 18), // GPIO5[18]
P9_6 = MBED_PIN(0x09, 6, 4, 11), // GPIO4[11]
PA_0 = MBED_PIN(0x0A, 0, NO_GPIO, 0),
PA_1 = MBED_PIN(0x0A, 1, 4, 8), // GPIO4[8] high-drive
PA_2 = MBED_PIN(0x0A, 2, 4, 9), // GPIO4[9] high-drive
PA_3 = MBED_PIN(0x0A, 3, 4, 10), // GPIO4[10] high-drive
PA_4 = MBED_PIN(0x0A, 4, 5, 19), // GPIO5[19]
PB_0 = MBED_PIN(0x0B, 0, 5, 20), // GPIO5[20]
PB_1 = MBED_PIN(0x0B, 1, 5, 21), // GPIO5[21]
PB_2 = MBED_PIN(0x0B, 2, 5, 22), // GPIO5[22]
PB_3 = MBED_PIN(0x0B, 3, 5, 23), // GPIO5[23]
PB_4 = MBED_PIN(0x0B, 4, 5, 24), // GPIO5[24]
PB_5 = MBED_PIN(0x0B, 5, 5, 25), // GPIO5[25]
PB_6 = MBED_PIN(0x0B, 6, 5, 26), // GPIO5[26]
PC_0 = MBED_PIN(0x0C, 0, NO_GPIO, 0),
PC_1 = MBED_PIN(0x0C, 1, 6, 0), // GPIO6[0]
PC_2 = MBED_PIN(0x0C, 2, 6, 1), // GPIO6[1]
PC_3 = MBED_PIN(0x0C, 3, 6, 2), // GPIO6[2]
PC_4 = MBED_PIN(0x0C, 4, 6, 3), // GPIO6[3]
PC_5 = MBED_PIN(0x0C, 5, 6, 4), // GPIO6[4]
PC_6 = MBED_PIN(0x0C, 6, 6, 5), // GPIO6[5]
PC_7 = MBED_PIN(0x0C, 7, 6, 6), // GPIO6[6]
PC_8 = MBED_PIN(0x0C, 8, 6, 7), // GPIO6[7]
PC_9 = MBED_PIN(0x0C, 9, 6, 8), // GPIO6[8]
PC_10 = MBED_PIN(0x0C, 10, 6, 9), // GPIO6[9]
PC_11 = MBED_PIN(0x0C, 11, 6, 10), // GPIO6[10]
PC_12 = MBED_PIN(0x0C, 12, 6, 11), // GPIO6[11]
PC_13 = MBED_PIN(0x0C, 13, 6, 12), // GPIO6[12]
PC_14 = MBED_PIN(0x0C, 14, 6, 13), // GPIO6[13]
PD_0 = MBED_PIN(0x0D, 0, 6, 14), // GPIO6[14]
PD_1 = MBED_PIN(0x0D, 1, 6, 15), // GPIO6[15]
PD_2 = MBED_PIN(0x0D, 2, 6, 16), // GPIO6[16]
PD_3 = MBED_PIN(0x0D, 3, 6, 17), // GPIO6[17]
PD_4 = MBED_PIN(0x0D, 4, 6, 18), // GPIO6[18]
PD_5 = MBED_PIN(0x0D, 5, 6, 19), // GPIO6[19]
PD_6 = MBED_PIN(0x0D, 6, 6, 20), // GPIO6[20]
PD_7 = MBED_PIN(0x0D, 7, 6, 21), // GPIO6[21]
PD_8 = MBED_PIN(0x0D, 8, 6, 22), // GPIO6[22]
PD_9 = MBED_PIN(0x0D, 9, 6, 23), // GPIO6[23]
PD_10 = MBED_PIN(0x0D, 10, 6, 24), // GPIO6[24]
PD_11 = MBED_PIN(0x0D, 11, 6, 25), // GPIO6[25]
PD_12 = MBED_PIN(0x0D, 12, 6, 26), // GPIO6[26]
PD_13 = MBED_PIN(0x0D, 13, 6, 27), // GPIO6[27]
PD_14 = MBED_PIN(0x0D, 14, 6, 28), // GPIO6[28]
PD_15 = MBED_PIN(0x0D, 15, 6, 29), // GPIO6[29]
PD_16 = MBED_PIN(0x0D, 16, 6, 30), // GPIO6[30]
PE_0 = MBED_PIN(0x0E, 0, 7, 0), // GPIO7[0]
PE_1 = MBED_PIN(0x0E, 1, 7, 1), // GPIO7[1]
PE_2 = MBED_PIN(0x0E, 2, 7, 2), // GPIO7[2]
PE_3 = MBED_PIN(0x0E, 3, 7, 3), // GPIO7[3]
PE_4 = MBED_PIN(0x0E, 4, 7, 4), // GPIO7[4]
PE_5 = MBED_PIN(0x0E, 5, 7, 5), // GPIO7[5]
PE_6 = MBED_PIN(0x0E, 6, 7, 6), // GPIO7[6]
PE_7 = MBED_PIN(0x0E, 7, 7, 7), // GPIO7[7]
PE_8 = MBED_PIN(0x0E, 8, 7, 8), // GPIO7[8]
PE_9 = MBED_PIN(0x0E, 9, 7, 9), // GPIO7[9]
PE_10 = MBED_PIN(0x0E, 10, 7, 10), // GPIO7[10]
PE_11 = MBED_PIN(0x0E, 11, 7, 11), // GPIO7[11]
PE_12 = MBED_PIN(0x0E, 12, 7, 12), // GPIO7[12]
PE_13 = MBED_PIN(0x0E, 13, 7, 13), // GPIO7[13]
PE_14 = MBED_PIN(0x0E, 14, 7, 14), // GPIO7[14]
PE_15 = MBED_PIN(0x0E, 15, 7, 15), // GPIO7[15]
PF_0 = MBED_PIN(0x0F, 0, NO_GPIO, 0),
PF_1 = MBED_PIN(0x0F, 1, 7, 16), // GPIO7[16]
PF_2 = MBED_PIN(0x0F, 2, 7, 17), // GPIO7[17]
PF_3 = MBED_PIN(0x0F, 3, 7, 18), // GPIO7[18]
PF_4 = MBED_PIN(0x0F, 4, NO_GPIO, 0),
PF_5 = MBED_PIN(0x0F, 5, 7, 19), // GPIO7[19]
PF_6 = MBED_PIN(0x0F, 6, 7, 20), // GPIO7[20]
PF_7 = MBED_PIN(0x0F, 7, 7, 21), // GPIO7[21]
PF_8 = MBED_PIN(0x0F, 8, 7, 22), // GPIO7[22]
PF_9 = MBED_PIN(0x0F, 9, 7, 23), // GPIO7[23]
PF_10 = MBED_PIN(0x0F, 10, 7, 24), // GPIO7[24]
PF_11 = MBED_PIN(0x0F, 11, 7, 25), // GPIO7[25]
// GPIO pins from MCU pins
GPIO0_0 = P0_0,
GPIO0_1 = P0_1 ,
GPIO0_2 = P1_15,
GPIO0_3 = P1_16,
GPIO0_4 = P1_0,
GPIO0_5 = P6_6,
GPIO0_6 = P3_6,
GPIO0_7 = P2_7,
GPIO0_8 = P1_1,
GPIO0_9 = P1_2,
GPIO0_10 = P1_3,
GPIO0_11 = P1_4,
GPIO0_12 = P1_17,
GPIO0_13 = P1_18,
GPIO0_14 = P2_10,
GPIO0_15 = P1_20,
GPIO1_0 = P1_7,
GPIO1_1 = P1_8,
GPIO1_2 = P1_9,
GPIO1_3 = P1_10,
GPIO1_4 = P1_11,
GPIO1_5 = P1_12,
GPIO1_6 = P1_13,
GPIO1_7 = P1_14,
GPIO1_8 = P1_5,
GPIO1_9 = P1_6,
GPIO1_10 = P2_9,
GPIO1_11 = P2_11,
GPIO1_12 = P2_12,
GPIO1_13 = P2_13,
GPIO1_14 = P3_4,
GPIO1_15 = P3_5,
GPIO2_0 = P4_0,
GPIO2_1 = P4_1,
GPIO2_2 = P4_2,
GPIO2_3 = P4_3,
GPIO2_4 = P4_4,
GPIO2_5 = P4_5,
GPIO2_6 = P4_6,
GPIO2_7 = P5_7,
GPIO2_8 = P6_12,
GPIO2_9 = P5_0,
GPIO2_10 = P5_1,
GPIO2_11 = P5_2,
GPIO2_12 = P5_3,
GPIO2_13 = P5_4,
GPIO2_14 = P5_5,
GPIO2_15 = P5_6,
GPIO3_0 = P6_1,
GPIO3_1 = P6_2,
GPIO3_2 = P6_3,
GPIO3_3 = P6_4,
GPIO3_4 = P6_5,
GPIO3_5 = P6_9,
GPIO3_6 = P6_10,
GPIO3_7 = P6_11,
GPIO3_8 = P7_0,
GPIO3_9 = P7_1,
GPIO3_10 = P7_2,
GPIO3_11 = P7_3,
GPIO3_12 = P7_4,
GPIO3_13 = P7_5,
GPIO3_14 = P7_6,
GPIO3_15 = P7_7,
GPIO4_0 = P8_0,
GPIO4_1 = P8_1,
GPIO4_2 = P8_2,
GPIO4_3 = P8_3,
GPIO4_4 = P8_4,
GPIO4_5 = P8_5,
GPIO4_6 = P8_6,
GPIO4_7 = P8_7,
GPIO4_8 = PA_1,
GPIO4_9 = PA_2,
GPIO4_10 = PA_3,
GPIO4_11 = P9_6,
GPIO4_12 = P9_0,
GPIO4_13 = P9_1,
GPIO4_14 = P9_2,
GPIO4_15 = P9_3,
GPIO5_0 = P2_0,
GPIO5_1 = P2_1,
GPIO5_2 = P2_2,
GPIO5_3 = P2_3,
GPIO5_4 = P2_4,
GPIO5_5 = P2_5,
GPIO5_6 = P2_6,
GPIO5_7 = P2_8,
GPIO5_8 = P3_1,
GPIO5_9 = P3_2,
GPIO5_10 = P3_7,
GPIO5_11 = P3_8,
GPIO5_12 = P4_8,
GPIO5_13 = P4_9,
GPIO5_14 = P4_10,
GPIO5_15 = P6_7,
GPIO5_16 = P6_8,
GPIO5_17 = P9_4,
GPIO5_18 = P9_5,
GPIO5_19 = PA_4,
GPIO5_20 = PB_0,
GPIO5_21 = PB_1,
GPIO5_22 = PB_2,
GPIO5_23 = PB_3,
GPIO5_24 = PB_4,
GPIO5_25 = PB_5,
GPIO5_26 = PB_6,
GPIO6_0 = PC_1,
GPIO6_1 = PC_2,
GPIO6_2 = PC_3,
GPIO6_3 = PC_4,
GPIO6_4 = PC_5,
GPIO6_5 = PC_6,
GPIO6_6 = PC_7,
GPIO6_7 = PC_8,
GPIO6_8 = PC_9,
GPIO6_9 = PC_10,
GPIO6_10 = PC_11,
GPIO6_11 = PC_12,
GPIO6_12 = PC_13,
GPIO6_13 = PC_14,
GPIO6_14 = PD_0,
GPIO6_15 = PD_1,
GPIO6_16 = PD_2,
GPIO6_17 = PD_3,
GPIO6_18 = PD_4,
GPIO6_19 = PD_5,
GPIO6_20 = PD_6,
GPIO6_21 = PD_7,
GPIO6_22 = PD_8,
GPIO6_23 = PD_9,
GPIO6_24 = PD_10,
GPIO6_25 = PD_11,
GPIO6_26 = PD_12,
GPIO6_27 = PD_13,
GPIO6_28 = PD_14,
GPIO6_29 = PD_15,
GPIO6_30 = PD_16,
GPIO7_0 = PE_0,
GPIO7_1 = PE_1,
GPIO7_2 = PE_2,
GPIO7_3 = PE_3,
GPIO7_4 = PE_4,
GPIO7_5 = PE_5,
GPIO7_6 = PE_5,
GPIO7_7 = PE_7,
GPIO7_8 = PE_8,
GPIO7_9 = PE_9,
GPIO7_10 = PE_10,
GPIO7_11 = PE_11,
GPIO7_12 = PE_12,
GPIO7_13 = PE_13,
GPIO7_14 = PE_14,
GPIO7_15 = PE_15,
GPIO7_16 = PF_1,
GPIO7_17 = PF_2,
GPIO7_18 = PF_3,
GPIO7_19 = PF_5,
GPIO7_20 = PF_6,
GPIO7_21 = PF_7,
GPIO7_22 = PF_8,
GPIO7_23 = PF_9,
GPIO7_24 = PF_10,
GPIO7_25 = PF_11,
// Map mbed pin names to LPC43xx board signals
// Group 0x18 : CLKn pins
SFP_CLK0 = MBED_PIN(0x18, 0, 0, 0),
SFP_CLK1 = MBED_PIN(0x18, 1, 0, 0),
SFP_CLK2 = MBED_PIN(0x18, 2, 0, 0),
SFP_CLK3 = MBED_PIN(0x18, 3, 0, 0),
// Group 0x19 : USB1, I2C0, ADC0, ADC1
SFP_USB1 = MBED_PIN(0x19, 0, 0, 0),
SFP_I2C0 = MBED_PIN(0x19, 1, 0, 0),
SFP_AIO0 = MBED_PIN(0x19, 2, 0, 0), // ADC0 function select register
SFP_AIO1 = MBED_PIN(0x19, 3, 0, 0), // ADC1 function select register
SFP_AIO2 = MBED_PIN(0x19, 4, 0, 0), // Analog function select register
SFP_EMCD = MBED_PIN(0x1A, 0, 0, 0), // EMC clock delay register
SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3
SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7
// Dedicated pin (no GPIO)
P_DED = MBED_PIN(0, 0, NO_GPIO, 0),
// Not connected
NC = (int)0xFFFFFFFF,
// ---------- Micromint Bambino 200/200E/210/210E (LQFP144) ----------
// Base headers - J8, J9, J10 on Bambino 210/210E
// n/p = not populated, n/a = not available
// 210E 210 200E 200
// ---- ---- ---- ----
p15 = P7_4, // J8-1 J8-1 S4-3 S4-3
p16 = P7_5, // J8-2 J8-2 S4-4 S4-4
p17 = P4_1, // J8-3 J8-3 S3-4 S3-4
p18 = P7_7, // J8-4 J8-4 S4-5 S4-5
p19 = P4_3, // J8-5* J8-5* S3-4 S3-3
p20 = P4_4, // J8-6* J8-6* S1-5 S1-5
p20b = PF_8, // J8-6** J8-6** S3-5 S3-5
// (*) if p20 is configured as DAC, ADC is not available for p19
// (**) requires JP2 mod
p21 = P6_5, // J9-1 J9-1 S2-5 S2-5
p22 = P6_4, // J9-2 J9-2 S2=4 S2-4
p23 = P1_7, // J9-3 J9-3 S2-3 S2-3
p24 = P4_0, // J9-4 J9-4 S3-7 S3-7
p25 = P6_9, // J9-5 J9-5 S8-7 n/p
p26 = P5_5, // J9-6 J9-6 S3-8 S3-8
p27 = P5_7, // J9-7 J9-7 S3-9 S3-9
p28 = P7_6, // J9-8 J9-8 S4-6 S4-6
p29 = P6_12, // J10-1 J10-1 S10-3 n/p
p30 = P5_0, // J10-2 J10-2 S1-4 S1-4
p31 = P4_6, // J10-3 J10-3 S2-6 S2-6
p32 = P4_8, // J10-4 J10-4 S2-7 S2-7
p33 = P4_9, // J10-5 J10-5 S2-8 S2-8
p34 = P4_10, // J10-6 J10-6 S2-9 S2-9
p37 = P2_3, // J10-9 J10-9 S4-8 S4-8
p38 = P2_4, // J10-10 J10-10 S4-9 S4-9
// Extended headers - J11, J12, J13, J14 on Bambino 210E
// 210E 210 200E 200
// ---- ---- ---- ----
p47 = P6_3, // J11-1 n/p S7-5 n/p
p48 = P6_6, // J11-2 n/p S6-7 n/p
p49 = P6_7, // J11-3 n/p S6-8 n/p
p50 = P6_8, // J11-4 n/p S6-9 n/p
p53 = P2_2, // J11-7 n/p S7-7 n/p
p54 = P2_1, // J11-8 n/p S7-3 n/p
p55 = PF_10, // J12-1 n/p n/a n/a
p56 = PF_7, // J12-2 n/p n/a n/a
p57 = P2_6, // J12-3 n/p S8-6 n/p
p58 = P2_8, // J12-4 n/p S8-3 n/p
p59 = P6_10, // J12-5 n/p S7-8 n/p
p60 = P2_9, // J12-6 n/p S9-3 n/p
p61 = P7_3, // J13-1 n/p S7-9 n/p
p62 = P3_2, // J13-2 n/p S9-4 n/p
p63 = P7_2, // J13-3 n/p S4-7 S4-7
p64 = P3_1, // J13-4 n/p S9-5 n/p
p65 = P7_1, // J13-5 n/p S9-8 n/p
p66 = P7_0, // J13-6 n/p S9-9 n/p
p67 = P4_2, // J13-7 n/p S4-6 S4-6
p68 = P4_5, // J13-8 n/p S1-3 S1-3
p69 = P2_13, // J14-1 n/p S9-7 n/p
p70 = P2_12, // J14-2 n/p S9-6 n/p
p71 = P9_6, // J14-3 n/p S6-6 n/p
p72 = P9_5, // J14-4 n/p S7-4 n/p
p73 = P5_3, // J14-5 n/p S6-5 n/p
p74 = P1_8, // J14-6 n/p S6-4 n/p
p75 = P1_5, // J14-7 n/p S10-6 n/p
p76 = P1_4, // J14-8 n/p S10-7 n/p
p77 = P1_3, // J14-9 n/p S10-8 n/p
p78 = PF_4, // J14-10 n/p S10-9 n/p
// J16 - PMOD-SSP header (not populated, field installable)
p80 = P1_0, // J16-1 J16-1 S1-6 S1-6
p81 = P1_2, // J16-2 J16-2 S1-7 S1-7
p82 = P1_1, // J16-3 J16-3 S1-8 S1-8
p83 = P3_0, // J16-4 J16-4 S1-9 S1-9
// Arduino pins - J8, J9, J10
// 210E 210 200E 200
// ---- ---- ---- ----
D0 = p21, // J9-1 J9-1 S2-5 S2-5
D1 = p22, // J9-2 J9-2 S2-4 S2-4
D2 = p23, // J9-3 J9-3 S2-3 S2-3
D3 = p24, // J9-4 J9-4 S3-7 S3-7
D4 = p25, // J9-5 J9-5 S8-7 n/p
D5 = p26, // J9-6 J9-6 S3-8 S3-8
D6 = p27, // J9-7 J9-7 S3-9 S3-9
D7 = p28, // J9-8 J9-8 S4-6 S4-6
D8 = p29, // J10-1 J10-1 S10-1 n/p
D9 = p30, // J10-2 J10-2 S1-4 S1-4
D10 = p31, // J10-3 J10-3 S2-6 S2-6
D11 = p32, // J10-4 J10-4 S2-7 S2-7
D12 = p33, // J10-5 J10-5 S2-8 S2-8
D13 = p34, // J10-6 J10-6 S2-9 S2-9
D16 = p37, // J10-9 J10-9 S4-8 S4-8
D17 = p38, // J10-10 J10-10 S4-9 S4-9
A0 = p15, // J8-1 J8-1 S4-3 S4-3
A1 = p16, // J8-2 J8-2 S4-4 S4-4
A2 = p17, // J8-3 J8-3 S3-4 S3-4
A3 = p18, // J8-4 J8-4 S3-4 S3-4
A4 = p19, // J8-5* J8-5* S3-3 S3-3
A5 = p20, // J8-6* J8-6* S1-5 S1-5
A5b = p20b, // J8-6** J8-6** S3-5 S3-5
// (*) if A5 is configured as DAC, ADC is not available for A4
// (**) requires JP2 mod
// Extended Arduino pins - J11, J12, J13, J14
// 210E 210 200E 200
// ---- ---- ---- ----
D20 = p61, // J13-1 n/p S7-9 n/p
D21 = p62, // J13-2 n/p S9-4 n/p
D22 = p63, // J13-3 n/p S4-7 S4-7
D23 = p64, // J13-4 n/p S9-5 n/p
D24 = p65, // J13-5 n/p S9-8 n/p
D25 = p66, // J13-6 n/p S9-9 n/p
D26 = p67, // J13-7 n/p S3-7 S3-7
D27 = p68, // J13-8 n/p S1-3 S1-3
D30 = p69, // J14-1 n/p S9-7 n/p
D31 = p70, // J14-2 n/p S9-6 n/p
D32 = p71, // J14-3 n/p S6-6 n/p
D33 = p72, // J14-4 n/p S7-4 n/p
D34 = p73, // J14-5 n/p S6-5 n/p
D35 = p74, // J14-6 n/p S6-4 n/p
D36 = p75, // J14-7 n/p S10-6 n/p
D37 = p76, // J14-8 n/p S10-7 n/p
D38 = p77, // J14-9 n/p S10-8 n/p
D39 = p78, // J14-10 n/p S10-9 n/p
D40 = p47, // J11-1 n/p S7-5 n/p
D41 = p48, // J11-2 n/p S6-7 n/p
D42 = p49, // J11-3 n/p S6-8 n/p
D43 = p50, // J11-4 n/p S6-9 n/p
D46 = p53, // J11-7 n/p S7-7 n/p
D47 = p54, // J11-8 n/p S7-3 n/p
D52 = p57, // J12-3 n/p S8-6 n/p
D53 = p58, // J12-4 n/p S8-3 n/p
D54 = p59, // J12-5 n/p S7-8 n/p
D55 = p60, // J12-6 n/p S9-3 n/p
A6 = p55, // J12-1 n/p n/a n/a
A7 = p56, // J12-2 n/p n/a n/a
// User interfaces: LEDs, buttons
// 210E 210 200E 200
// ---- ---- ---- ----
LED1 = P6_11, // 210/210E/200e/200
LED2 = P2_5, // 210/210E/200e/200
LED3 = P6_1, // 210/210E only S6-3 n/p
LED4 = P6_2, // 210/210E only S7-6 n/p
LED_YELLOW = LED1,
LED_GREEN = LED2,
LED_RED = LED3,
LED_BLUE = LED4,
BTN1 = P2_7,
// Standardized button names
BUTTON1 = BTN1,
// Serial pins - UART, SPI, I2C
// 210E 210 200E 200
// ---- ---- ---- ----
UART0_TX = P6_4, // J9-2 J9-2 S2-4 S2-4
UART0_RX = P6_5, // J9-1 J9-1 S2-5 S2-5
UART1_TX = P5_6, // XBEE n/p S5-4/XBEE S5-4
UART1_RX = P1_14, // XBEE n/p S5-5/XBEE S5-5
UART2_TX = P2_10, // MBEDHDK MBEDHDK S10-4 n/p
UART2_RX = P2_11, // MBEDHDK MBEDHDK S10-5 n/p
UART3_TX = P2_3, // J10-9 n/p S4-8 S4-8
UART3_RX = P2_4, // J10-10 n/p S4-9 S4-9
COM1_TX = UART0_TX,
COM1_RX = UART0_RX,
COM2_TX = UART1_TX,
COM2_RX = UART1_RX,
COM3_TX = UART2_TX,
COM3_RX = UART2_RX,
COM4_TX = UART3_TX,
COM4_RX = UART3_RX,
// 210E 210 200E 200
// ---- ---- ---- ----
SPI0_SCK = P3_0, // J16-4 n/p S1-9 S1-9
SPI0_MISO = P1_1, // J16-3 n/p S1-8 S1-8
SPI0_MOSI = P1_2, // J16-2 n/p S1-7 S1-7
SPI0_SSEL = P1_0, // J16-1 n/p S1-6 S1-6
SPI1_SCK = PF_4, // J14-10 n/p S10-9 n/p
SPI1_MISO = P1_3, // J14-9 n/p S10-8 n/p
SPI1_MOSI = P1_4, // J14-8 n/p S10-7 n/p
SPI1_SSEL = P1_5, // J14-7 n/p S10-6 n/p
I2C0_SDA = P_DED, // J15-3 J15-3 S8-8 n/p
I2C0_SCL = P_DED, // J15-1 J15-1 S8-9 n/p
I2C1_SDA = P2_3, // J10-9 J10-9 S4-8 S4-8
I2C1_SCL = P2_4, // J10-10 J10-10 S4-9 S4-9
// Analog pins
ADC0 = P7_4, // J8-1 J8-1 S4-3 S4-3
ADC1 = P7_5, // J8-2 J8-2 S4-4 S4-4
ADC2 = P4_1, // J8-3 J8-3 S3-4 S3-4
ADC3 = P7_7, // J8-4 J8-4 S3-4 S3-4
ADC4 = P4_3, // J8-5* J8-5* S3-3 S3-3
ADC5 = PF_8, // J8-6** J8-6** S1-5 S1-5
ADC6 = PF_10, // J12-1 n/p n/a n/a
ADC7 = PF_7, // J12-2 n/p n/a n/a
DAC0 = P4_4, // J8-6* J8-6* S3-5 S3-5
// (*) if DAC0 is configured, ADC4 is not available
// (**) ADC5 requires JP2 mod
// Analog Only Pins
adc0_0 = MBED_PIN(NO_PORT, 0, NO_GPIO, 0),
adc0_1 = MBED_PIN(NO_PORT, 1, NO_GPIO, 0),
adc0_2 = MBED_PIN(NO_PORT, 2, NO_GPIO, 0),
adc0_3 = MBED_PIN(NO_PORT, 3, NO_GPIO, 0),
adc0_4 = MBED_PIN(NO_PORT, 4, NO_GPIO, 0),
adc0_5 = MBED_PIN(NO_PORT, 5, NO_GPIO, 0),
adc0_6 = MBED_PIN(NO_PORT, 6, NO_GPIO, 0),
adc0_7 = MBED_PIN(NO_PORT, 7, NO_GPIO, 0),
adc1_0 = MBED_PIN(NO_PORT, 8, NO_GPIO, 0),
adc1_1 = MBED_PIN(NO_PORT, 9, NO_GPIO, 0),
adc1_2 = MBED_PIN(NO_PORT, 10, NO_GPIO, 0),
adc1_3 = MBED_PIN(NO_PORT, 11, NO_GPIO, 0),
adc1_4 = MBED_PIN(NO_PORT, 12, NO_GPIO, 0),
adc1_5 = MBED_PIN(NO_PORT, 13, NO_GPIO, 0),
adc1_6 = MBED_PIN(NO_PORT, 14, NO_GPIO, 0),
adc1_7 = MBED_PIN(NO_PORT, 15, NO_GPIO, 0),
// USB pins
// 210E 210 200E 200
// ---- ---- ---- ----
USBTX = UART2_TX, // MBEDHDK MBEDHDK S10-4 n/p
USBRX = UART2_RX, // MBEDHDK MBEDHDK S10-5 n/p
// PWM pins
// 210E 210 200E 200
// ---- ---- ---- ----
PWM1 = P1_7, // J9-3 J9-3 S2-3 S2-3
PWM2 = P7_6, // J9-8 J9-8 S4-6 S4-6
PWM3 = P6_12, // J10-1 J10-1 S10-3 n/p
PWM4 = P4_6, // J10-3 J10-3 S2-6 S2-6
PWM5 = P7_5, // J8-2 J8-2 S4-4 S4-4
PWM6 = P4_1, // J8-3 J8-3 S3-4 S3-4
PWM7 = P7_7, // J8-4 J8-4 S4-5 S4-5
PWM8 = P2_8, // J12-4 n/p S8-3 n/p
PWM9 = P2_9, // J12-6 n/p S9-3 n/p
PWM10 = P7_1, // J13-5 n/p S9-8 n/p
PWM11 = P7_0, // J13-6 n/p S9-9 n/p
PWM12 = P1_5, // J14-7 n/p S10-6 n/p
// ---------- End of Micromint Bambino ----------
} PinName;
typedef enum {
PullUp = 0,
PullDown = 3,
PullNone = 2,
Repeater = 1,
OpenDrain = 4,
PullDefault = PullDown
} PinMode;
#ifdef __cplusplus
}
#endif
#endif
