Peter Cooper
/
diags
test code for our MBED board
Diff: help_data.h
- Revision:
- 1:6877bb99aa17
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/help_data.h Wed May 04 08:30:52 2011 +0000 @@ -0,0 +1,42 @@ +#define HELP_STRING \ +"Commands for the Diags are\n" \ +"help - This text\n" \ +"exec <file> - Exec a command file from the local file system\n" \ +"cat <file> - Display a file on the current output device \n" \ +"dir - show files on the local file system\n" \ +"wait <1/10 sec> - Wait for X tenths of a second\n" \ +"baud <speed> - Set the serial lines baud rate to X\n" + +#define HELP_STRING2 \ +"print <string> - Print a string to the console\n\n" \ +"list - Scan down the I2C bus for devices\n" \ +"i2cw <add> <dat> - Write a value to the I2C bus\n" \ +"i2cr <add> - Read a value from the I2C bus\n" \ +"led <loop> - Test the MBED leds, cyle fron X times\n" \ +"sseg <loop> - Test the Seven Segment display X times\n" \ +"digital <loop> - Test the digital I/O lines as outputs X times\n" \ +"rs232 <string> - Send a string out to the serial line\n" + +#define HELP_STRING3 \ +"kbd <type> - Keypad data entery test, type is either 3 or 4 (3*4) or (4*4)\n" \ +"lcd <type> - LCD test type is 1 or 2, 1 for Robot electronics, 2 for Batron\n" \ +"canrx - Listen to the can bus only, display received messages\n" \ +"cantx <message> - Send a message down the can bus to the receiving station\n" \ +"netinit - Start the tcp/ip network, by DHCP\n" \ +"ticker - Start the ticker test on LED 4\n" \ +"station <char> - Station ID for each station\n" \ +"date - Current RTC date\n" \ +"dateset <secs> - Set the RTC from the command line in seconds \n" \ +" http://www.onlineconversion.com/unix_time.htm\n" + +#define HELP_SCRIPT1 \ +"MBED scripting basics\n" \ +"Variables are v0 to V9, jump points are J0 to J9\n" \ +"Following are the actions that can be handled by the scripting language\n\n" \ +"set <var> <value> - Set a variable to a value\n" \ +"sum <var> <action> <var *> - sum tow variables together\n" \ +"tst <var> <test> <var *> <jump> - test a variable to see if it passes the test\n" \ +" Jump to the jump lable if needed\n" \ +"point <jump> - Set a jump point\n" \ +"\n\n" \ +"Maths actions are +, -, /, * with test actions of <, >, !, =\n" \ No newline at end of file