Diff: main.cpp

Revision:

7:d3b49f1d9f76

Parent:

4:81cea7a352b0

Child:

8:f6aa5561f219

--- a/main.cpp	Fri May 09 19:58:03 2014 +0300
+++ b/main.cpp	Fri Jun 13 07:41:55 2014 +0000
@@ -1,12 +1,50 @@
+/*
+ * mbed Application program for the mbed LPC1114FN28
+ * Test program -> Check LED & Switch function 
+ *
+ * Copyright (c) 2014 Kenji Arai / JH1PJL
+ *  http://www.page.sannet.ne.jp/kenjia/index.html
+ *  http://mbed.org/users/kenjiArai/
+ *      Created: June      13th, 2014
+ *      Revised: June      13th, 2014
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+ * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+ * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
 #include "mbed.h"
 
-DigitalOut myled(LED1);
+#define LED_TEST    0   // =1 -> LED test, =0 -> SW test
+
+DigitalOut  myled0(dp28);       // LED for Debug
+DigitalOut  myled1(dp14);       // Indicate state transition
+DigitalIn   sw_chng(dp1,PullUp);// SW for select
+DigitalIn   sw_mode(dp2,PullUp);// SW for Mode change
 
 int main() {
+#if LED_TEST
     while(1) {
-        myled = 1;
-        wait(0.2);
-        myled = 0;
-        wait(0.2);
+        myled0 = 1;
+        myled1 = 0;
+        wait(1.0);
+        myled0 = 0;
+        myled1 = 1;
+        wait(1.0);
     }
+#else
+    while(1) {
+        if (sw_chng == 1){
+            myled0 = 0;
+        } else {
+            myled0 = 1;
+        }
+        if (sw_mode == 1){
+            myled1 = 0;
+        } else {
+            myled1 = 1;
+        }
+    }
+#endif
 }