Diff: main_bmp180.h

Revision:

14:18a98cad6109

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main_bmp180.h	Sun Jun 22 06:10:57 2014 +0000
@@ -0,0 +1,42 @@
+/*
+ * mbed Application program for the mbed LPC1114FN28
+ * Test program -> Check RTC module
+ *
+ * Copyright (c) 2014 Kenji Arai / JH1PJL
+ *  http://www.page.sannet.ne.jp/kenjia/index.html
+ *  http://mbed.org/users/kenjiArai/
+ *      Created: June      22nd, 2014
+ *      Revised: June      22nd, 2014
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+ * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+ * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "mbed.h"
+#include "BMP180.h"             // Own lib. / Pressure sensor             
+
+Serial      pc(dp16,dp15);      // UART (vertual COM)
+#if 1
+BMP180      bmp180(dp5,dp27);   // Bosch sensor
+#else
+I2C         i2c(dp5,dp27);      // SDA, SCL
+BMP180      bmp180(i2c);        // Bosch sensor
+#endif
+   
+//-------------------------------------------------------------------------------------------------
+//  Control Program
+//-------------------------------------------------------------------------------------------------
+int main() {
+    pc.baud(9600);
+    pc.printf("\r\nmbed LPC1114FN28 BMP180 test by JH1PJL created on "__DATE__"(UTC)\r\n"); 
+    while(1) {
+    //  ---------- Barometer Sensor / BMP180 --------------------------------------------------
+        bmp180.normalize();
+        pc.printf("Pres:%4.1fhPa, Temp:%\+-0.1fdegC\r\n",
+                bmp180.read_pressure(), bmp180.read_temperature());
+        wait(1.0);
+    }
+}