Kazuki Yamamoto
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
(01.May.2014) started sales! http://www.switch-science.com/catalog/1717/
(13.March.2014) updated to 0.5.0
This is a pin conversion PCB from mbed 1768/11U24 to arduino UNO.
- So if you have both mbed and arduino shields, I guess you would be happy with such a conversion board :)
Photos
- Board photo vvv
- Schematic photo vvv
- Functionality photo vvv
Latest eagle files
PCB >> /media/uploads/k4zuki/mbedshield050.brd
SCH >> /media/uploads/k4zuki/mbedshield050.sch
BIG changes from previous version
- Ethernet RJ45 connector is removed.
- http://mbed.org/components/Seeed-Ethernet-Shield-V20/ is the biggest hint to use Ethernet!
MostALL of components can be bought at Akizuki http://akizukidenshi.com/- But sorry, they do not send parts to abroad
- Pinout is changed!
| arduino | 0.4.0 | 0.5.0 |
|---|---|---|
| D4 | p12 | p21 |
| D5 | p11 | p22 |
| MOSI_ | none | p11 |
| MISO_ | none | p12 |
| SCK_ | none | p13 |
This design has bug(s)
- I2C functional pin differs between 1768 and 11U24.
Fixed bugs here
- MiniUSB cable cannot be connected on mbed if you solder high-height electrolytic capacitor on C3.
- http://akizukidenshi.com/catalog/g/gP-05002/ is the solution to make this 100% AKIZUKI parts!
- the 6-pin ISP port is not inprimented in version 0.4.0
it will be fixed in later version 0.4.1/0.4.2/0.5.0This has beenfixed
I am doing some porting to use existing arduino shields but it may faster if you do it by yourself...
you can use arduino PinName "A0-A5,D0-D13" plus backside SPI port for easier porting.
To do this you have to edit PinName enum in
- "mbed/TARGET_LPC1768/PinNames.h" or
- "mbed/TARGET_LPC11U24/PinNames.h" as per your target mbed.
here is the actual list: This list includes define switch to switch pin assignment
part_of_PinNames.h
USBTX = P0_2,
USBRX = P0_3,
//from here mbeDshield mod
D0=p27,
D1=p28,
D2=p14,
D3=p13,
#ifdef MBEDSHIELD_050
MOSI_=p11,
MISO_=p12,
SCK_=p13,
D4=p21,
D5=p22,
#else
D4=p12,
D5=p11,
#endif
D6=p23,
D7=p24,
D8=p25,
D9=p26,
D10=p8,
D11=p5,
D12=p6,
D13=p7,
A0=p15,
A1=p16,
A2=p17,
A3=p18,
A4=p19,
A5=p20,
SDA=p9,
SCL=p10,
//mbeDshield mod ends here
// Not connected
NC = (int)0xFFFFFFFF
Diff: DigitalInOut.h
- Revision:
- 55:d722ed6a4237
- Parent:
- 54:71b101360fb9
- Child:
- 59:0883845fe643
--- a/DigitalInOut.h Tue Jan 08 12:46:36 2013 +0000
+++ b/DigitalInOut.h Wed Jan 16 12:56:34 2013 +0000
@@ -40,38 +40,38 @@
DigitalInOut(PinName pin) {
gpio_init(&gpio, pin, PIN_INPUT);
}
-
+
/** Set the output, specified as 0 or 1 (int)
*
- * @param value An integer specifying the pin output value,
- * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
*/
void write(int value) {
gpio_write(&gpio, value);
}
-
+
/** Return the output setting, represented as 0 or 1 (int)
*
* @returns
- * an integer representing the output setting of the pin if it is an output,
+ * an integer representing the output setting of the pin if it is an output,
* or read the input if set as an input
*/
int read() {
return gpio_read(&gpio);
}
-
+
/** Set as an output
*/
void output() {
gpio_dir(&gpio, PIN_OUTPUT);
}
-
+
/** Set as an input
*/
void input() {
gpio_dir(&gpio, PIN_INPUT);
}
-
+
/** Set the input pin mode
*
* @param mode PullUp, PullDown, PullNone, OpenDrain
@@ -79,7 +79,7 @@
void mode(PinMode pull) {
gpio_mode(&gpio, pull);
}
-
+
#ifdef MBED_OPERATORS
/** A shorthand for write()
*/
@@ -87,12 +87,12 @@
write(value);
return *this;
}
-
+
DigitalInOut& operator= (DigitalInOut& rhs) {
write(rhs.read());
return *this;
}
-
+
/** A shorthand for read()
*/
operator int() {