Testing SHT75 humidity sensor on STM F303K8 board.
Fork of Nucleo-F303K8-SSD1306_OLED by
Sample code to test SHT75 humidity sensor using STM F303K8 board. Uses a 3.3V from board to power sensor. 10K resistor Pull-up on data. Must not be on same pins as I2C. Uses D0 for Clk and D1 for Data.
I had to modify sample code supplied by https://developer.mbed.org/users/nimbusgb/code/SHT75/ because the sensor failed to read without the softReset() and readStatus() at beginning of measurement loop. I think this is caused by the 72Mhtz speed of the F303K8 but did not attempt to fully diagnose.
The readStatus() method from library seems to malfunction and always return a -1 which never changes even when sensor is unplugged.
See https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity_Sensors/Sensirion_Humidity_Sensors_SHT7x_Datasheet_V5.pdf section 2.1 for wiring.
Diff: mbed.bld
- Revision:
- 0:fa185766e039
diff -r 000000000000 -r fa185766e039 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat Mar 19 02:18:42 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/c0f6e94411f5 \ No newline at end of file