Forked para SNOCC

Dependencies:   GPS

Dependents:   SNOCC_V1 SNOCC_V2

Fork of RA8875 by SNOCC

Committer:
WiredHome
Date:
Thu Dec 17 12:19:01 2015 +0000
Revision:
99:66edf771373a
Parent:
98:ecebed9b80b2
Child:
100:0b084475d5a9
Disable the "TestEnable" and republish.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
WiredHome 78:faf49c381591 1 ///
WiredHome 78:faf49c381591 2 /// @mainpage RA8875 Display Controller Driver library
WiredHome 78:faf49c381591 3 ///
WiredHome 78:faf49c381591 4 /// The RA8875 Display controller is a powerful interface for low cost displays. It
WiredHome 78:faf49c381591 5 /// can support displays up to 800 x 600 pixels x 16-bit color. Another common
WiredHome 78:faf49c381591 6 /// implementation is 480 x 272 x 16 with two layers. The two layers can be
WiredHome 78:faf49c381591 7 /// exchanged, or blended in various ways (transparency, OR, AND, and more).
WiredHome 78:faf49c381591 8 /// It includes graphics acceleration capabilities for drawing primitives,
WiredHome 78:faf49c381591 9 /// such as line, rectangle, circles, and more.
WiredHome 78:faf49c381591 10 ///
WiredHome 78:faf49c381591 11 /// The controller additionally supports backlight control (via PWM), keypad scanning
WiredHome 78:faf49c381591 12 /// (for a 4 x 5 matrix) and resistive touch-panel support.
WiredHome 78:faf49c381591 13 ///
WiredHome 78:faf49c381591 14 /// @section Display_Config Display Configuration
WiredHome 78:faf49c381591 15 ///
WiredHome 78:faf49c381591 16 /// This section details basics for bringing the display online. At a minimum,
WiredHome 78:faf49c381591 17 /// the display is instantiated. After that any of the available commands
WiredHome 78:faf49c381591 18 /// may be issued.
WiredHome 78:faf49c381591 19 ///
WiredHome 78:faf49c381591 20 /// During the instantiation, the display is powered on, cleared, and the backlight
WiredHome 78:faf49c381591 21 /// is energized. Additionally, the keypad and touchscreen features are activated.
WiredHome 78:faf49c381591 22 /// It is important to keep in mind that the keypad had the default mapping, and
WiredHome 78:faf49c381591 23 /// the touchscreen does not have the calibration matrix configured, so additional
WiredHome 78:faf49c381591 24 /// steps may be necessary.
WiredHome 78:faf49c381591 25 ///
WiredHome 78:faf49c381591 26 /// @code
WiredHome 78:faf49c381591 27 /// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome 81:01da2e34283d 28 /// lcd.init();
WiredHome 78:faf49c381591 29 /// lcd.foreground(Blue);
WiredHome 78:faf49c381591 30 /// lcd.line(0,0, 479,271);
WiredHome 78:faf49c381591 31 /// ...
WiredHome 78:faf49c381591 32 /// @endcode
WiredHome 78:faf49c381591 33 ///
WiredHome 78:faf49c381591 34 /// @section Touch_Panel Touch Panel
WiredHome 78:faf49c381591 35 ///
WiredHome 78:faf49c381591 36 /// The supported touch panel interface is for a resistive panel, and is natively
WiredHome 78:faf49c381591 37 /// supported by the RA8875 controller. There are a few steps to enable this interface.
WiredHome 78:faf49c381591 38 ///
WiredHome 78:faf49c381591 39 /// @subsection Touch_Panel_Enable Touch Panel Enable
WiredHome 78:faf49c381591 40 ///
WiredHome 78:faf49c381591 41 /// @see TouchPanelInit has two forms - fully automatic, and controlled. See the APIs for
WiredHome 78:faf49c381591 42 /// details.
WiredHome 78:faf49c381591 43 ///
WiredHome 78:faf49c381591 44 /// @subsection Touch_Panel_Calibration
WiredHome 78:faf49c381591 45 ///
WiredHome 78:faf49c381591 46 /// The touch panel is not initially calibrated on startup. The application should
WiredHome 78:faf49c381591 47 /// provide a means to activate the calibration process, and that should not require
WiredHome 78:faf49c381591 48 /// the touchscreen as it may not yet be usable. Alternately, a calibration matrix
WiredHome 78:faf49c381591 49 /// can be loaded from non-volatile and installed.
WiredHome 78:faf49c381591 50 ///
WiredHome 78:faf49c381591 51 /// @section Keypad Keypad
WiredHome 78:faf49c381591 52 ///
WiredHome 78:faf49c381591 53 /// The keypad has a default keypad mapping, but there is an API that permits
WiredHome 78:faf49c381591 54 /// installing a custom keymap.
WiredHome 78:faf49c381591 55 ///
WiredHome 19:3f82c1161fd2 56 #ifndef RA8875_H
WiredHome 19:3f82c1161fd2 57 #define RA8875_H
WiredHome 19:3f82c1161fd2 58 #include <mbed.h>
WiredHome 19:3f82c1161fd2 59
WiredHome 77:9206c13aa527 60 #include "RA8875_Regs.h"
WiredHome 19:3f82c1161fd2 61 #include "GraphicsDisplay.h"
WiredHome 19:3f82c1161fd2 62
WiredHome 41:2956a0a221e5 63 #define RA8875_DEFAULT_SPI_FREQ 5000000
WiredHome 19:3f82c1161fd2 64
WiredHome 19:3f82c1161fd2 65 // Define this to enable code that monitors the performance of various
WiredHome 19:3f82c1161fd2 66 // graphics commands.
WiredHome 78:faf49c381591 67 //#define PERF_METRICS
WiredHome 19:3f82c1161fd2 68
WiredHome 23:a50ded45dbaf 69 // What better place for some test code than in here and the companion
WiredHome 23:a50ded45dbaf 70 // .cpp file. See also the bottom of this file.
WiredHome 99:66edf771373a 71 //#define TESTENABLE
WiredHome 19:3f82c1161fd2 72
WiredHome 19:3f82c1161fd2 73 /// DOS colors - slightly color enhanced
WiredHome 20:6e2e4a8372eb 74 #define Black (color_t)(RGB(0,0,0))
WiredHome 20:6e2e4a8372eb 75 #define Blue (color_t)(RGB(0,0,187))
WiredHome 20:6e2e4a8372eb 76 #define Green (color_t)(RGB(0,187,0))
WiredHome 20:6e2e4a8372eb 77 #define Cyan (color_t)(RGB(0,187,187))
WiredHome 20:6e2e4a8372eb 78 #define Red (color_t)(RGB(187,0,0))
WiredHome 20:6e2e4a8372eb 79 #define Magenta (color_t)(RGB(187,0,187))
WiredHome 81:01da2e34283d 80 #define Brown (color_t)(RGB(63,63,0))
WiredHome 20:6e2e4a8372eb 81 #define Gray (color_t)(RGB(187,187,187))
WiredHome 20:6e2e4a8372eb 82 #define Charcoal (color_t)(RGB(85,85,85))
WiredHome 62:ba5d33438fda 83 #define BrightBlue (color_t)(RGB(0,0,255))
WiredHome 62:ba5d33438fda 84 #define BrightGreen (color_t)(RGB(0,255,0))
WiredHome 62:ba5d33438fda 85 #define BrightCyan (color_t)(RGB(0,255,255))
WiredHome 62:ba5d33438fda 86 #define BrightRed (color_t)(RGB(255,0,0))
WiredHome 20:6e2e4a8372eb 87 #define Orange (color_t)(RGB(255,85,85))
WiredHome 20:6e2e4a8372eb 88 #define Pink (color_t)(RGB(255,85,255))
WiredHome 81:01da2e34283d 89 #define Yellow (color_t)(RGB(187,187,0))
WiredHome 20:6e2e4a8372eb 90 #define White (color_t)(RGB(255,255,255))
WiredHome 20:6e2e4a8372eb 91
WiredHome 62:ba5d33438fda 92 #define DarkBlue (color_t)(RGB(0,0,63))
WiredHome 62:ba5d33438fda 93 #define DarkGreen (color_t)(RGB(0,63,0))
WiredHome 62:ba5d33438fda 94 #define DarkCyan (color_t)(RGB(0,63,63))
WiredHome 62:ba5d33438fda 95 #define DarkRed (color_t)(RGB(63,0,0))
WiredHome 62:ba5d33438fda 96 #define DarkMagenta (color_t)(RGB(63,0,63))
WiredHome 62:ba5d33438fda 97 #define DarkBrown (color_t)(RGB(63,63,0))
WiredHome 62:ba5d33438fda 98 #define DarkGray (color_t)(RGB(63,63,63))
WiredHome 61:8f3153bf0baa 99
WiredHome 82:f7d300f26540 100 #define min(a,b) ((a<b)?a:b)
WiredHome 82:f7d300f26540 101 #define max(a,b) ((a>b)?a:b)
WiredHome 82:f7d300f26540 102
WiredHome 19:3f82c1161fd2 103
WiredHome 19:3f82c1161fd2 104 //namespace SW_graphics
WiredHome 19:3f82c1161fd2 105 //{
WiredHome 19:3f82c1161fd2 106
WiredHome 96:40b74dd3695b 107 class FPointerDummy; // used by the callback methods.
WiredHome 24:8ca861acf12d 108
WiredHome 21:3c1efb192927 109 /// This is a graphics library for the Raio RA8875 Display Controller chip
WiredHome 21:3c1efb192927 110 /// attached to a 4-wire SPI interface.
WiredHome 21:3c1efb192927 111 ///
WiredHome 56:7a85d226ad0d 112 /// It offers both primitive and high level APIs.
WiredHome 56:7a85d226ad0d 113 ///
WiredHome 21:3c1efb192927 114 /// Central to this API is a coordinate system, where the origin (0,0) is in
WiredHome 56:7a85d226ad0d 115 /// the top-left corner of the display, and the width (x) extends positive to the
WiredHome 56:7a85d226ad0d 116 /// right and the height (y) extends positive toward the bottom.
WiredHome 21:3c1efb192927 117 ///
WiredHome 56:7a85d226ad0d 118 /// @caution As there are both graphics and text commands, one must take care to use
WiredHome 21:3c1efb192927 119 /// the proper coordinate system for each. Some of the text APIs are in units
WiredHome 29:422616aa04bd 120 /// of column and row, which is measured in character positions (and dependent
WiredHome 56:7a85d226ad0d 121 /// on the font size), where other text APIs permit pixel level positioning.
WiredHome 56:7a85d226ad0d 122 ///
WiredHome 56:7a85d226ad0d 123 /// @code
WiredHome 56:7a85d226ad0d 124 /// #include "RA8875.h"
WiredHome 56:7a85d226ad0d 125 /// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome 56:7a85d226ad0d 126 ///
WiredHome 56:7a85d226ad0d 127 /// int main()
WiredHome 56:7a85d226ad0d 128 /// {
WiredHome 81:01da2e34283d 129 /// lcd.init();
WiredHome 56:7a85d226ad0d 130 /// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome 56:7a85d226ad0d 131 /// lcd.circle( 400,25, 25, BrightRed);
WiredHome 56:7a85d226ad0d 132 /// lcd.fillcircle( 400,25, 15, RGB(128,255,128));
WiredHome 56:7a85d226ad0d 133 /// lcd.ellipse( 440,75, 35,20, BrightBlue);
WiredHome 56:7a85d226ad0d 134 /// lcd.fillellipse( 440,75, 25,10, Blue);
WiredHome 56:7a85d226ad0d 135 /// lcd.triangle( 440,100, 475,110, 450,125, Magenta);
WiredHome 56:7a85d226ad0d 136 /// lcd.filltriangle( 445,105, 467,111, 452,120, Cyan);
WiredHome 56:7a85d226ad0d 137 /// lcd.rect( 400,130, 475,155, Brown);
WiredHome 56:7a85d226ad0d 138 /// lcd.fillrect( 405,135, 470,150, Pink);
WiredHome 56:7a85d226ad0d 139 /// lcd.roundrect( 410,160, 475,190, 10,8, Yellow);
WiredHome 56:7a85d226ad0d 140 /// lcd.fillroundrect(415,165, 470,185, 5,3, Orange);
WiredHome 56:7a85d226ad0d 141 /// lcd.line( 430,200, 460,230, RGB(0,255,0));
WiredHome 56:7a85d226ad0d 142 /// for (int i=0; i<=30; i+=5)
WiredHome 56:7a85d226ad0d 143 /// lcd.pixel(435+i,200+i, White);
WiredHome 56:7a85d226ad0d 144 /// }
WiredHome 56:7a85d226ad0d 145 /// @endcode
WiredHome 29:422616aa04bd 146 ///
WiredHome 31:c72e12cd5c67 147 /// @todo Add Scroll support for text.
WiredHome 37:f19b7e7449dc 148 /// @todo Improve sync between internal and external font support - cursor, window, scroll.
WiredHome 75:ca78388cfd77 149 /// @todo Add Hardware reset signal - but testing to date indicates it is not needed.
WiredHome 44:207594dece70 150 /// @todo Add high level objects - x-y graph, meter, others... but these will
WiredHome 44:207594dece70 151 /// probably be best served in another class, since they may not
WiredHome 44:207594dece70 152 /// be needed for many uses.
WiredHome 21:3c1efb192927 153 ///
WiredHome 19:3f82c1161fd2 154 class RA8875 : public GraphicsDisplay
WiredHome 19:3f82c1161fd2 155 {
WiredHome 19:3f82c1161fd2 156 public:
WiredHome 53:86d24b9480b9 157 /// cursor type to be shown as the text cursor.
WiredHome 53:86d24b9480b9 158 typedef enum
WiredHome 53:86d24b9480b9 159 {
WiredHome 53:86d24b9480b9 160 NOCURSOR, ///< cursor is hidden
WiredHome 53:86d24b9480b9 161 IBEAM, ///< | cursor
WiredHome 53:86d24b9480b9 162 UNDER, ///< _ cursor
WiredHome 53:86d24b9480b9 163 BLOCK ///< Block cursor
WiredHome 53:86d24b9480b9 164 } cursor_t;
WiredHome 53:86d24b9480b9 165
WiredHome 19:3f82c1161fd2 166 /// font type selection.
WiredHome 19:3f82c1161fd2 167 typedef enum
WiredHome 19:3f82c1161fd2 168 {
WiredHome 31:c72e12cd5c67 169 ISO8859_1, ///< ISO8859-1 font
WiredHome 31:c72e12cd5c67 170 ISO8859_2, ///< ISO8859-2 font
WiredHome 31:c72e12cd5c67 171 ISO8859_3, ///< ISO8859-3 font
WiredHome 31:c72e12cd5c67 172 ISO8859_4 ///< ISO8859-4 font
WiredHome 19:3f82c1161fd2 173 } font_t;
WiredHome 19:3f82c1161fd2 174
WiredHome 84:e102021864b5 175 /// display orientation
WiredHome 19:3f82c1161fd2 176 typedef enum
WiredHome 19:3f82c1161fd2 177 {
WiredHome 84:e102021864b5 178 normal, ///< normal (landscape) orientation
WiredHome 84:e102021864b5 179 rotate_0 = normal, ///< alternate to 'normal'
WiredHome 84:e102021864b5 180 rotate_90, ///< rotated clockwise 90 degree
WiredHome 84:e102021864b5 181 rotate_180, ///< rotated (clockwise) 180 degree
WiredHome 84:e102021864b5 182 rotate_270, ///< rotated clockwise 270 degree
WiredHome 84:e102021864b5 183 } orientation_t;
WiredHome 19:3f82c1161fd2 184
WiredHome 19:3f82c1161fd2 185 /// alignment
WiredHome 19:3f82c1161fd2 186 typedef enum
WiredHome 19:3f82c1161fd2 187 {
WiredHome 31:c72e12cd5c67 188 align_none, ///< align - none
WiredHome 31:c72e12cd5c67 189 align_full ///< align - full
WiredHome 19:3f82c1161fd2 190 } alignment_t;
WiredHome 19:3f82c1161fd2 191
WiredHome 19:3f82c1161fd2 192 /// Scale factor - 1, 2, 3 4
WiredHome 40:04aa280dfa39 193 typedef int HorizontalScale;
WiredHome 19:3f82c1161fd2 194
WiredHome 19:3f82c1161fd2 195 /// Scale factor - 1, 2, 3, 4
WiredHome 40:04aa280dfa39 196 typedef int VerticalScale;
WiredHome 19:3f82c1161fd2 197
WiredHome 19:3f82c1161fd2 198 /// Clear screen region
WiredHome 19:3f82c1161fd2 199 typedef enum
WiredHome 19:3f82c1161fd2 200 {
WiredHome 31:c72e12cd5c67 201 FULLWINDOW, ///< Full screen
WiredHome 31:c72e12cd5c67 202 ACTIVEWINDOW ///< active window/region
WiredHome 19:3f82c1161fd2 203 } Region_t;
WiredHome 19:3f82c1161fd2 204
WiredHome 61:8f3153bf0baa 205 /// Set the Layer Display Mode. @ref SetLayerMode
WiredHome 53:86d24b9480b9 206 typedef enum
WiredHome 53:86d24b9480b9 207 {
WiredHome 61:8f3153bf0baa 208 ShowLayer0, ///< Only layer 0 is visible, layer 1 is hidden (default)
WiredHome 56:7a85d226ad0d 209 ShowLayer1, ///< Only layer 1 is visible, layer 0 is hidden
WiredHome 53:86d24b9480b9 210 LightenOverlay, ///< Lighten-overlay mode
WiredHome 53:86d24b9480b9 211 TransparentMode, ///< Transparent mode
WiredHome 53:86d24b9480b9 212 BooleanOR, ///< Boolean OR mode
WiredHome 53:86d24b9480b9 213 BooleanAND, ///< Boolean AND mode
WiredHome 53:86d24b9480b9 214 FloatingWindow ///< Floating Window mode
WiredHome 53:86d24b9480b9 215 } LayerMode_T;
WiredHome 53:86d24b9480b9 216
hexley 54:e117ad10fba6 217 /// Touch Panel modes
hexley 54:e117ad10fba6 218 typedef enum
hexley 54:e117ad10fba6 219 {
hexley 54:e117ad10fba6 220 TP_Auto, ///< Auto touch detection mode
hexley 54:e117ad10fba6 221 TP_Manual, ///< Manual touch detection mode
hexley 54:e117ad10fba6 222 } tpmode_t;
WiredHome 96:40b74dd3695b 223
WiredHome 96:40b74dd3695b 224 /// printscreen callback commands
WiredHome 96:40b74dd3695b 225 typedef enum
WiredHome 96:40b74dd3695b 226 {
WiredHome 96:40b74dd3695b 227 OPEN, ///< command to open the file. cast uint32_t * to the buffer to get the total size to be written.
WiredHome 96:40b74dd3695b 228 WRITE, ///< command to write some data, buffer points to the data and the size is in bytes.
WiredHome 96:40b74dd3695b 229 CLOSE, ///< command to close the file
WiredHome 96:40b74dd3695b 230 } filecmd_t;
WiredHome 96:40b74dd3695b 231
WiredHome 96:40b74dd3695b 232 /// print screen callback
WiredHome 96:40b74dd3695b 233 ///
WiredHome 96:40b74dd3695b 234 /// The special form of the print screen will pass one blob at a time
WiredHome 96:40b74dd3695b 235 /// to the callback. There are basic command declaring that the stream
WiredHome 96:40b74dd3695b 236 /// can be opened, a block written, and the stream closed. There is
WiredHome 96:40b74dd3695b 237 /// also a command to communicate the total size being delivered.
WiredHome 96:40b74dd3695b 238 ///
WiredHome 96:40b74dd3695b 239 /// @code
WiredHome 96:40b74dd3695b 240 /// lcd.PrintScreen(x,y,w,h,callback);
WiredHome 96:40b74dd3695b 241 /// ...
WiredHome 96:40b74dd3695b 242 /// void callback(filecmd_t cmd, uint8_t * buffer, uint16_t size) {
WiredHome 96:40b74dd3695b 243 /// switch(cmd) {
WiredHome 96:40b74dd3695b 244 /// case OPEN:
WiredHome 96:40b74dd3695b 245 /// pc.printf("About to write %u bytes\r\n", *(uint32_t *)buffer);
WiredHome 96:40b74dd3695b 246 /// fh = fopen("file.bmp", "w+b");
WiredHome 96:40b74dd3695b 247 /// break;
WiredHome 96:40b74dd3695b 248 /// case WRITE:
WiredHome 96:40b74dd3695b 249 /// fwrite(buffer, size, fh);
WiredHome 96:40b74dd3695b 250 /// break;
WiredHome 96:40b74dd3695b 251 /// case CLOSE:
WiredHome 96:40b74dd3695b 252 /// fclose(fh);
WiredHome 96:40b74dd3695b 253 /// break;
WiredHome 96:40b74dd3695b 254 /// default:
WiredHome 96:40b74dd3695b 255 /// pc.printf("Unexpected callback %d\r\n", cmd);
WiredHome 96:40b74dd3695b 256 /// break;
WiredHome 96:40b74dd3695b 257 /// }
WiredHome 96:40b74dd3695b 258 /// }
WiredHome 96:40b74dd3695b 259 /// @endcode
WiredHome 96:40b74dd3695b 260 ///
WiredHome 96:40b74dd3695b 261 /// @param cmd is the command to execute. @see filecmd_t.
WiredHome 96:40b74dd3695b 262 /// @param buffer is a pointer to the buffer being passed.
WiredHome 96:40b74dd3695b 263 /// @param size is the number of bytes in the buffer.
WiredHome 96:40b74dd3695b 264 ///
WiredHome 96:40b74dd3695b 265 typedef RetCode_t (* PrintCallback_T)(filecmd_t cmd, uint8_t * buffer, uint16_t size);
hexley 54:e117ad10fba6 266
WiredHome 19:3f82c1161fd2 267 /// Constructor for a display based on the RAiO RA8875
WiredHome 19:3f82c1161fd2 268 /// display controller.
WiredHome 19:3f82c1161fd2 269 ///
WiredHome 61:8f3153bf0baa 270 /// This configures the registers and calls the @ref init method.
WiredHome 61:8f3153bf0baa 271 ///
WiredHome 56:7a85d226ad0d 272 /// @code
WiredHome 56:7a85d226ad0d 273 /// #include "RA8875.h"
WiredHome 56:7a85d226ad0d 274 /// RA8875 lcd(p5, p6, p7, p12, NC, "tft");
WiredHome 56:7a85d226ad0d 275 ///
WiredHome 56:7a85d226ad0d 276 /// int main()
WiredHome 56:7a85d226ad0d 277 /// {
WiredHome 81:01da2e34283d 278 /// lcd.init();
WiredHome 56:7a85d226ad0d 279 /// lcd.printf("printing 3 x 2 = %d", 3*2);
WiredHome 56:7a85d226ad0d 280 /// lcd.circle(400,25, 25, BrightRed);
WiredHome 56:7a85d226ad0d 281 /// }
WiredHome 56:7a85d226ad0d 282 /// @endcode
WiredHome 56:7a85d226ad0d 283 ///
WiredHome 72:ecffe56af969 284 /// @param[in] mosi is the SPI master out slave in pin on the mbed.
WiredHome 72:ecffe56af969 285 /// @param[in] miso is the SPI master in slave out pin on the mbed.
WiredHome 72:ecffe56af969 286 /// @param[in] sclk is the SPI shift clock pin on the mbed.
WiredHome 72:ecffe56af969 287 /// @param[in] csel is the DigitalOut pin on the mbed to use as the
WiredHome 19:3f82c1161fd2 288 /// active low chip select for the display controller.
WiredHome 72:ecffe56af969 289 /// @param[in] reset is the DigitalOut pin on the mbed to use as the
WiredHome 19:3f82c1161fd2 290 /// active low reset input on the display controller -
WiredHome 19:3f82c1161fd2 291 /// but this is not currently used.
WiredHome 72:ecffe56af969 292 /// @param[in] name is a text name for this object, which will permit
WiredHome 72:ecffe56af969 293 /// capturing stdout to puts() and printf() directly to it.
WiredHome 19:3f82c1161fd2 294 ///
WiredHome 19:3f82c1161fd2 295 RA8875(PinName mosi, PinName miso, PinName sclk, PinName csel, PinName reset, const char * name = "lcd");
WiredHome 19:3f82c1161fd2 296
WiredHome 45:679c2fb8480c 297 // Destructor doesn't have much to do as this would typically be created
WiredHome 45:679c2fb8480c 298 // at startup, and not at runtime.
WiredHome 19:3f82c1161fd2 299 //~RA8875();
WiredHome 19:3f82c1161fd2 300
WiredHome 79:544eb4964795 301 /// Initialize the driver.
WiredHome 79:544eb4964795 302 ///
WiredHome 81:01da2e34283d 303 /// @param[in] width in pixels to configure the display for. This parameter is optional
WiredHome 81:01da2e34283d 304 /// and the default is 480.
WiredHome 81:01da2e34283d 305 /// @param[in] height in pixels to configure the display for. This parameter is optional
WiredHome 81:01da2e34283d 306 /// and the default is 272.
WiredHome 81:01da2e34283d 307 /// @param[in] color_bpp can be either 8 or 16, but must be consistent
WiredHome 81:01da2e34283d 308 /// with the width and height parameters. This parameter is optional
WiredHome 81:01da2e34283d 309 /// and the default is 16.
WiredHome 79:544eb4964795 310 /// @param[in] power defines if the display should be left in the power-on or off state.
WiredHome 81:01da2e34283d 311 /// If power is true (on), the backlight is set to 100%. This parameter is optional
WiredHome 81:01da2e34283d 312 /// and the default is true (on). @see Power.
WiredHome 81:01da2e34283d 313 /// @param[in] keypadon defines if the keypad support should be enabled. This parameter is optional
WiredHome 81:01da2e34283d 314 /// and the default is true (enabled). @see KeypadInit.
WiredHome 81:01da2e34283d 315 /// @param[in] touchscreeenon defines if the keypad support should be enabled. This parameter is optional
WiredHome 81:01da2e34283d 316 /// and the default is true (enabled). @see TouchPanelInit.
WiredHome 79:544eb4964795 317 /// @returns success/failure code. @see RetCode_t.
WiredHome 79:544eb4964795 318 ///
WiredHome 81:01da2e34283d 319 RetCode_t init(int width = 480, int height = 272, int color_bpp = 16,
WiredHome 81:01da2e34283d 320 bool poweron = true, bool keypadon = true, bool touchscreeenon = true);
WiredHome 79:544eb4964795 321
WiredHome 79:544eb4964795 322 /// Get a pointer to the error code.
WiredHome 79:544eb4964795 323 ///
WiredHome 79:544eb4964795 324 /// This method returns a pointer to a text string that matches the
WiredHome 79:544eb4964795 325 /// code. @see RetCode_t.
WiredHome 79:544eb4964795 326 ///
WiredHome 79:544eb4964795 327 /// @param[in] code is the return value from RetCode_t to look up.
WiredHome 79:544eb4964795 328 /// @returns a pointer to the text message representing code. If code
WiredHome 79:544eb4964795 329 /// is not a valid value, then it returns the text for bad_parameter;
WiredHome 79:544eb4964795 330 const char * GetErrorMessage(RetCode_t code);
WiredHome 79:544eb4964795 331
WiredHome 79:544eb4964795 332
WiredHome 50:2c4f474a2453 333 /// Select the drawing layer for subsequent commands.
WiredHome 43:3becae133285 334 ///
WiredHome 43:3becae133285 335 /// If the screen configuration is 480 x 272, or if it is 800 x 480
WiredHome 43:3becae133285 336 /// and 8-bit color, the the display supports two layers, which can
WiredHome 43:3becae133285 337 /// be independently drawn on and shown. Additionally, complex
WiredHome 43:3becae133285 338 /// operations involving both layers are permitted.
WiredHome 43:3becae133285 339 ///
WiredHome 56:7a85d226ad0d 340 /// @code
WiredHome 56:7a85d226ad0d 341 /// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome 56:7a85d226ad0d 342 /// lcd.rect(400,130, 475,155,Brown);
WiredHome 56:7a85d226ad0d 343 /// lcd.SelectDrawingLayer(1);
WiredHome 56:7a85d226ad0d 344 /// lcd.circle(400,25, 25, BrightRed);
WiredHome 56:7a85d226ad0d 345 /// wait(1);
WiredHome 56:7a85d226ad0d 346 /// lcd.SetLayerMode(ShowLayer1);
WiredHome 56:7a85d226ad0d 347 /// @endcode
WiredHome 56:7a85d226ad0d 348 ///
WiredHome 61:8f3153bf0baa 349 /// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome 61:8f3153bf0baa 350 /// actual register values are value 0 and 1. This API as well as
WiredHome 61:8f3153bf0baa 351 /// others that reference the layers use the values 0 and 1 for
WiredHome 61:8f3153bf0baa 352 /// cleaner iteration in the code.
WiredHome 43:3becae133285 353 ///
WiredHome 72:ecffe56af969 354 /// @param[in] layer is 0 or 1 to select the layer for subsequent
WiredHome 61:8f3153bf0baa 355 /// commands.
WiredHome 43:3becae133285 356 /// @returns success/failure code. @see RetCode_t.
WiredHome 43:3becae133285 357 ///
WiredHome 50:2c4f474a2453 358 RetCode_t SelectDrawingLayer(uint16_t layer);
WiredHome 43:3becae133285 359
WiredHome 61:8f3153bf0baa 360 /// Get the currently active drawing layer.
WiredHome 61:8f3153bf0baa 361 ///
WiredHome 61:8f3153bf0baa 362 /// This returns a value, 0 or 1, based on the screen configuration
WiredHome 61:8f3153bf0baa 363 /// and the currently active drawing layer.
WiredHome 61:8f3153bf0baa 364 ///
WiredHome 61:8f3153bf0baa 365 /// @code
WiredHome 61:8f3153bf0baa 366 /// uint16_t prevLayer = lcd.GetDrawingLayer();
WiredHome 61:8f3153bf0baa 367 /// lcd.SelectDrawingLayer(x);
WiredHome 61:8f3153bf0baa 368 /// lcd.circle(400,25, 25, BrightRed);
WiredHome 61:8f3153bf0baa 369 /// lcd.SelectDrawingLayer(prevLayer);
WiredHome 61:8f3153bf0baa 370 /// @endcode
WiredHome 61:8f3153bf0baa 371 ///
WiredHome 61:8f3153bf0baa 372 /// @attention The user manual refers to Layer 1 and Layer 2, however the
WiredHome 61:8f3153bf0baa 373 /// actual register values are value 0 and 1. This API as well as
WiredHome 61:8f3153bf0baa 374 /// others that reference the layers use the values 0 and 1 for
WiredHome 61:8f3153bf0baa 375 /// cleaner iteration in the code.
WiredHome 61:8f3153bf0baa 376 ///
WiredHome 61:8f3153bf0baa 377 /// @returns the current drawing layer; 0 or 1.
WiredHome 61:8f3153bf0baa 378 ///
WiredHome 61:8f3153bf0baa 379 uint16_t GetDrawingLayer(void);
WiredHome 61:8f3153bf0baa 380
WiredHome 44:207594dece70 381 /// Set the Layer presentation mode.
WiredHome 44:207594dece70 382 ///
WiredHome 44:207594dece70 383 /// This sets the presentation mode for layers, and permits showing
WiredHome 44:207594dece70 384 /// a single layer, or applying a mode where the two layers
WiredHome 44:207594dece70 385 /// are combined using one of the hardware methods.
WiredHome 44:207594dece70 386 ///
WiredHome 61:8f3153bf0baa 387 /// Refer to the RA8875 data sheet for full details.
WiredHome 61:8f3153bf0baa 388 ///
WiredHome 56:7a85d226ad0d 389 /// @code
WiredHome 56:7a85d226ad0d 390 /// //lcd.SetLayerMode(OnlyLayer0); // default is layer 0
WiredHome 56:7a85d226ad0d 391 /// lcd.rect(400,130, 475,155,Brown);
WiredHome 56:7a85d226ad0d 392 /// lcd.SelectDrawingLayer(1);
WiredHome 56:7a85d226ad0d 393 /// lcd.circle(400,25, 25, BrightRed);
WiredHome 56:7a85d226ad0d 394 /// wait(1);
WiredHome 56:7a85d226ad0d 395 /// lcd.SetLayerMode(ShowLayer1);
WiredHome 56:7a85d226ad0d 396 /// @endcode
WiredHome 56:7a85d226ad0d 397 ///
WiredHome 72:ecffe56af969 398 /// @param[in] mode sets the mode in the Layer Transparency Register.
WiredHome 44:207594dece70 399 /// @returns success/failure code. @see RetCode_t.
WiredHome 44:207594dece70 400 ///
WiredHome 53:86d24b9480b9 401 RetCode_t SetLayerMode(LayerMode_T mode);
WiredHome 44:207594dece70 402
WiredHome 82:f7d300f26540 403 /// Get the Layer presentation mode.
WiredHome 82:f7d300f26540 404 ///
WiredHome 82:f7d300f26540 405 /// This gets the current layer mode. @see LayerMode_T.
WiredHome 82:f7d300f26540 406 ///
WiredHome 82:f7d300f26540 407 /// @returns layer mode.
WiredHome 82:f7d300f26540 408 ///
WiredHome 82:f7d300f26540 409 LayerMode_T GetLayerMode(void);
WiredHome 82:f7d300f26540 410
WiredHome 44:207594dece70 411 /// Set the layer transparency for each layer.
WiredHome 44:207594dece70 412 ///
WiredHome 44:207594dece70 413 /// Set the transparency, where the range of values is
WiredHome 44:207594dece70 414 /// from zero (fully visible) to eight (fully transparent).
WiredHome 44:207594dece70 415 /// The input value is automatically limited to this range.
WiredHome 44:207594dece70 416 ///
WiredHome 56:7a85d226ad0d 417 /// @code
WiredHome 56:7a85d226ad0d 418 /// // draw something on each layer, then step-fade across
WiredHome 56:7a85d226ad0d 419 /// display.SetLayerMode(RA8875::TransparentMode);
WiredHome 56:7a85d226ad0d 420 /// for (i=0; i<=8; i++) {
WiredHome 56:7a85d226ad0d 421 /// display.SetLayerTransparency(i, 8-i);
WiredHome 56:7a85d226ad0d 422 /// wait_ms(200);
WiredHome 56:7a85d226ad0d 423 /// }
WiredHome 56:7a85d226ad0d 424 /// @endcode
WiredHome 56:7a85d226ad0d 425 ///
WiredHome 72:ecffe56af969 426 /// @param[in] layer1 sets the layer 1 transparency.
WiredHome 72:ecffe56af969 427 /// @param[in] layer2 sets the layer 2 transparency.
WiredHome 44:207594dece70 428 /// @returns success/failure code. @see RetCode_t.
WiredHome 44:207594dece70 429 ///
WiredHome 44:207594dece70 430 RetCode_t SetLayerTransparency(uint8_t layer1, uint8_t layer2);
WiredHome 44:207594dece70 431
WiredHome 53:86d24b9480b9 432 /// Set the background color register used for transparency.
WiredHome 53:86d24b9480b9 433 ///
WiredHome 53:86d24b9480b9 434 /// This command sets the background color registers that are used
WiredHome 53:86d24b9480b9 435 /// in the transparent color operations involving the layers.
WiredHome 53:86d24b9480b9 436 ///
WiredHome 72:ecffe56af969 437 /// @param[in] color is optional and expressed in 16-bit format. If not
WiredHome 53:86d24b9480b9 438 /// supplied, a default of Black is used.
WiredHome 53:86d24b9480b9 439 /// @returns success/failure code. @see RetCode_t.
WiredHome 53:86d24b9480b9 440 ///
WiredHome 53:86d24b9480b9 441 RetCode_t SetBackgroundTransparencyColor(color_t color = RGB(0,0,0));
hexley 54:e117ad10fba6 442
WiredHome 73:f22a18707b5e 443
WiredHome 73:f22a18707b5e 444 /// Get the background color value used for transparency.
WiredHome 73:f22a18707b5e 445 ///
WiredHome 73:f22a18707b5e 446 /// This command reads the background color registers that define
WiredHome 73:f22a18707b5e 447 /// the transparency color for operations involving layers.
WiredHome 73:f22a18707b5e 448 ///
WiredHome 73:f22a18707b5e 449 /// @returns the color.
WiredHome 73:f22a18707b5e 450 ///
WiredHome 73:f22a18707b5e 451 color_t GetBackgroundTransparencyColor(void);
WiredHome 73:f22a18707b5e 452
hexley 54:e117ad10fba6 453 /// Initialize theTouch Panel controller with default values
hexley 54:e117ad10fba6 454 ///
WiredHome 78:faf49c381591 455 /// This activates the simplified touch panel init, which may work for
WiredHome 78:faf49c381591 456 /// most uses. The alternate API is available if fine-grained control
WiredHome 78:faf49c381591 457 /// is needed for the numerous settings.
WiredHome 78:faf49c381591 458 ///
WiredHome 56:7a85d226ad0d 459 /// @returns success/failure code. @see RetCode_t.
WiredHome 56:7a85d226ad0d 460 ///
hexley 54:e117ad10fba6 461 RetCode_t TouchPanelInit(void);
hexley 54:e117ad10fba6 462
hexley 54:e117ad10fba6 463 /// Initialize the Touch Panel controller with detailed settings.
hexley 54:e117ad10fba6 464 ///
WiredHome 78:faf49c381591 465 /// This is the detailed touch panel init, which provides the ability
WiredHome 78:faf49c381591 466 /// to set nearly every possible option.
WiredHome 78:faf49c381591 467 ///
hexley 54:e117ad10fba6 468 /// @param[in] bTpEnable Touch Panel enable/disable control:
hexley 54:e117ad10fba6 469 /// - TP_ENABLE: enable the touch panel
hexley 54:e117ad10fba6 470 /// - TP_DISABLE: disable the touch panel
WiredHome 56:7a85d226ad0d 471 /// @param[in] bTpAutoManual Touch Panel operating mode:
hexley 54:e117ad10fba6 472 /// - TP_MODE_AUTO: automatic capture
hexley 54:e117ad10fba6 473 /// - TP_MODE_MANUAL: manual capture
WiredHome 56:7a85d226ad0d 474 /// @param[in] bTpDebounce Debounce circuit enable for touch panel interrupt:
hexley 54:e117ad10fba6 475 /// - TP_DEBOUNCE_OFF: disable the debounce circuit
hexley 54:e117ad10fba6 476 /// - TP_DEBOUNCE_ON: enable the debounce circuit
WiredHome 56:7a85d226ad0d 477 /// @param[in] bTpManualMode When Manual Mode is selected, this sets the mode:
hexley 54:e117ad10fba6 478 /// - TP_MANUAL_IDLE: touch panel is idle
hexley 54:e117ad10fba6 479 /// - TP_MANUAL_WAIT: wait for touch panel event
hexley 54:e117ad10fba6 480 /// - TP_MANUAL_LATCH_X: latch X data
hexley 54:e117ad10fba6 481 /// - TP_MANUAL_LATCH_Y: latch Y data
WiredHome 56:7a85d226ad0d 482 /// @param[in] bTpAdcClkDiv Sets the ADC clock as a fraction of the System CLK:
hexley 54:e117ad10fba6 483 /// - TP_ADC_CLKDIV_1: Use CLK
hexley 54:e117ad10fba6 484 /// - TP_ADC_CLKDIV_2: Use CLK/2
hexley 54:e117ad10fba6 485 /// - TP_ADC_CLKDIV_4: Use CLK/4
hexley 54:e117ad10fba6 486 /// - TP_ADC_CLKDIV_8: Use CLK/8
hexley 54:e117ad10fba6 487 /// - TP_ADC_CLKDIV_16: Use CLK/16
hexley 54:e117ad10fba6 488 /// - TP_ADC_CLKDIV_32: Use CLK/32
hexley 54:e117ad10fba6 489 /// - TP_ADC_CLKDIV_64: Use CLK/64
hexley 54:e117ad10fba6 490 /// - TP_ADC_CLKDIV_128: Use CLK/128
WiredHome 56:7a85d226ad0d 491 /// @param[in] bTpAdcSampleTime Touch Panel sample time delay before ADC data is ready:
hexley 54:e117ad10fba6 492 /// - TP_ADC_SAMPLE_512_CLKS: Wait 512 system clocks
hexley 54:e117ad10fba6 493 /// - TP_ADC_SAMPLE_1024_CLKS: Wait 1024 system clocks
hexley 54:e117ad10fba6 494 /// - TP_ADC_SAMPLE_2048_CLKS: Wait 2048 system clocks
hexley 54:e117ad10fba6 495 /// - TP_ADC_SAMPLE_4096_CLKS: Wait 4096 system clocks
hexley 54:e117ad10fba6 496 /// - TP_ADC_SAMPLE_8192_CLKS: Wait 8192 system clocks
hexley 54:e117ad10fba6 497 /// - TP_ADC_SAMPLE_16384_CLKS: Wait 16384 system clocks
hexley 54:e117ad10fba6 498 /// - TP_ADC_SAMPLE_32768_CLKS: Wait 32768 system clocks
hexley 54:e117ad10fba6 499 /// - TP_ADC_SAMPLE_65536_CLKS: Wait 65536 system clocks
WiredHome 56:7a85d226ad0d 500 /// @returns success/failure code. @see RetCode_t.
WiredHome 56:7a85d226ad0d 501 ///
WiredHome 78:faf49c381591 502 RetCode_t TouchPanelInit(uint8_t bTpEnable, uint8_t bTpAutoManual, uint8_t bTpDebounce,
WiredHome 78:faf49c381591 503 uint8_t bTpManualMode, uint8_t bTpAdcClkDiv, uint8_t bTpAdcSampleTime);
WiredHome 53:86d24b9480b9 504
WiredHome 79:544eb4964795 505 /// Poll the TouchPanel and on a touch event return the a to d filtered x, y coordinates.
hexley 54:e117ad10fba6 506 ///
WiredHome 78:faf49c381591 507 /// This method reads the touch controller, which has a 10-bit range for each the
WiredHome 79:544eb4964795 508 /// x and the y axis.
WiredHome 79:544eb4964795 509 ///
WiredHome 79:544eb4964795 510 /// @note The returned values are not in display (pixel) units but are in analog to
WiredHome 79:544eb4964795 511 /// digital converter units.
WiredHome 78:faf49c381591 512 ///
WiredHome 81:01da2e34283d 513 /// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome 79:544eb4964795 514 /// @see TouchPanelReadable.
WiredHome 78:faf49c381591 515 ///
WiredHome 79:544eb4964795 516 /// @param[out] x is the x scale a/d value.
WiredHome 79:544eb4964795 517 /// @param[out] y is the y scale a/d value.
WiredHome 83:7bad0068cca0 518 /// @returns a value indicating the state of the touch,
WiredHome 83:7bad0068cca0 519 /// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 520 /// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 521 /// - touch: touch is detected, touch coordinates are returned.
WiredHome 83:7bad0068cca0 522 /// - held: held after touch, touch coordinates are returned.
WiredHome 83:7bad0068cca0 523 /// - release: indicates a release, touch coordinates are returned.
WiredHome 56:7a85d226ad0d 524 ///
WiredHome 83:7bad0068cca0 525 TouchCode_t TouchPanelA2DFiltered(int *x, int *y);
hexley 54:e117ad10fba6 526
WiredHome 79:544eb4964795 527 /// Poll the TouchPanel and on a touch event return the a to d raw x, y coordinates.
hexley 54:e117ad10fba6 528 ///
WiredHome 78:faf49c381591 529 /// This method reads the touch controller, which has a 10-bit range for each the
WiredHome 78:faf49c381591 530 /// x and the y axis. A number of samples of the raw data are taken, filtered,
WiredHome 79:544eb4964795 531 /// and the results are returned.
WiredHome 78:faf49c381591 532 ///
WiredHome 79:544eb4964795 533 /// @note The returned values are not in display (pixel) units but are in analog to
WiredHome 79:544eb4964795 534 /// digital converter units.
WiredHome 79:544eb4964795 535 ///
WiredHome 81:01da2e34283d 536 /// @note This API is usually not needed. @see TouchPanelComputeCalibration.
WiredHome 79:544eb4964795 537 /// @see TouchPanelReadable.
WiredHome 78:faf49c381591 538 ///
WiredHome 79:544eb4964795 539 /// @param[out] x is the x scale a/d value.
WiredHome 79:544eb4964795 540 /// @param[out] y is the y scale a/d value.
WiredHome 83:7bad0068cca0 541 /// @returns a value indicating the state of the touch,
WiredHome 83:7bad0068cca0 542 /// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 543 /// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 544 /// - touch: touch is detected, touch coordinates are returned.
WiredHome 83:7bad0068cca0 545 /// - held: held after touch, touch coordinates are returned.
WiredHome 83:7bad0068cca0 546 /// - release: indicates a release, touch coordinates are returned.
WiredHome 83:7bad0068cca0 547 ///
WiredHome 83:7bad0068cca0 548 TouchCode_t TouchPanelA2DRaw(int *x, int *y);
WiredHome 83:7bad0068cca0 549
WiredHome 83:7bad0068cca0 550 /// Get the screen calibrated point of touch.
WiredHome 83:7bad0068cca0 551 ///
WiredHome 83:7bad0068cca0 552 /// This method determines if there is a touch and if so it will provide
WiredHome 83:7bad0068cca0 553 /// the screen-relative touch coordinates. This method can be used in
WiredHome 83:7bad0068cca0 554 /// a manner similar to Serial.readable(), to determine if there was a
WiredHome 83:7bad0068cca0 555 /// touch and indicate that - but not care about the coordinates. Alternately,
WiredHome 83:7bad0068cca0 556 /// if a valid pointer to a point_t is provided, then if a touch is detected
WiredHome 83:7bad0068cca0 557 /// the point_t will be populated with data.
WiredHome 56:7a85d226ad0d 558 ///
WiredHome 83:7bad0068cca0 559 /// @code
WiredHome 83:7bad0068cca0 560 /// Timer t;
WiredHome 83:7bad0068cca0 561 /// t.start();
WiredHome 83:7bad0068cca0 562 /// do {
WiredHome 83:7bad0068cca0 563 /// point_t point = {0, 0};
WiredHome 83:7bad0068cca0 564 /// if (display.TouchPanelReadable(&point)) {
WiredHome 85:022bba13c5c4 565 /// display.pixel(point, Red);
WiredHome 83:7bad0068cca0 566 /// }
WiredHome 83:7bad0068cca0 567 /// } while (t.read_ms() < 30000);
WiredHome 83:7bad0068cca0 568 /// @endcode
WiredHome 83:7bad0068cca0 569 ///
WiredHome 85:022bba13c5c4 570 /// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome 83:7bad0068cca0 571 /// @returns a value indicating the state of the touch,
WiredHome 83:7bad0068cca0 572 /// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 573 /// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome 83:7bad0068cca0 574 /// - touch: touch is detected, touch coordinates are returned.
WiredHome 83:7bad0068cca0 575 /// - held: held after touch, touch coordinates are returned.
WiredHome 83:7bad0068cca0 576 /// - release: indicates a release, touch coordinates are returned.
WiredHome 83:7bad0068cca0 577 ///
WiredHome 85:022bba13c5c4 578 TouchCode_t TouchPanelReadable(point_t * TouchPoint = NULL);
WiredHome 85:022bba13c5c4 579
WiredHome 85:022bba13c5c4 580
WiredHome 85:022bba13c5c4 581 /// Wait for a touch panel touch and return it.
WiredHome 85:022bba13c5c4 582 ///
WiredHome 85:022bba13c5c4 583 /// This method is similar to Serial.getc() in that it will wait for a touch
WiredHome 85:022bba13c5c4 584 /// and then return. In order to extract the coordinates of the touch, a
WiredHome 85:022bba13c5c4 585 /// valid pointer to a point_t must be provided.
WiredHome 85:022bba13c5c4 586 ///
WiredHome 85:022bba13c5c4 587 /// @note There is no timeout on this function, so its use is not recommended.
WiredHome 85:022bba13c5c4 588 ///
WiredHome 85:022bba13c5c4 589 /// @code
WiredHome 85:022bba13c5c4 590 /// Timer t;
WiredHome 85:022bba13c5c4 591 /// t.start();
WiredHome 85:022bba13c5c4 592 /// do {
WiredHome 85:022bba13c5c4 593 /// point_t point = {0, 0};
WiredHome 85:022bba13c5c4 594 /// display.TouchPanelGet(&point); // hangs here until touch
WiredHome 85:022bba13c5c4 595 /// display.pixel(point, Red);
WiredHome 85:022bba13c5c4 596 /// } while (t.read_ms() < 30000);
WiredHome 85:022bba13c5c4 597 /// @endcode
WiredHome 85:022bba13c5c4 598 ///
WiredHome 85:022bba13c5c4 599 /// @param[out] TouchPoint is the touch point, if a touch is registered.
WiredHome 85:022bba13c5c4 600 /// @returns a value indicating the state of the touch,
WiredHome 85:022bba13c5c4 601 /// - no_cal: no calibration matrix is available, touch coordinates are not returned.
WiredHome 85:022bba13c5c4 602 /// - no_touch: no touch is detected, touch coordinates are not returned.
WiredHome 85:022bba13c5c4 603 /// - touch: touch is detected, touch coordinates are returned.
WiredHome 85:022bba13c5c4 604 /// - held: held after touch, touch coordinates are returned.
WiredHome 85:022bba13c5c4 605 /// - release: indicates a release, touch coordinates are returned.
WiredHome 85:022bba13c5c4 606 ///
WiredHome 85:022bba13c5c4 607 TouchCode_t TouchPanelGet(point_t * TouchPoint);
WiredHome 85:022bba13c5c4 608
WiredHome 83:7bad0068cca0 609
WiredHome 77:9206c13aa527 610 /// Calibrate the touch panel.
WiredHome 77:9206c13aa527 611 ///
WiredHome 77:9206c13aa527 612 /// This method accepts two lists - one list is target points in ,
WiredHome 77:9206c13aa527 613 /// display coordinates and the other is a lit of raw touch coordinate
WiredHome 77:9206c13aa527 614 /// values. It generates a calibration matrix for later use. This
WiredHome 77:9206c13aa527 615 /// matrix is also accessible to the calling API, which may store
WiredHome 77:9206c13aa527 616 /// the matrix in persistent memory and then install the calibration
WiredHome 77:9206c13aa527 617 /// matrix on the next power cycle. By doing so, it can avoid the
WiredHome 77:9206c13aa527 618 /// need to calibrate on every power cycle.
WiredHome 77:9206c13aa527 619 ///
WiredHome 81:01da2e34283d 620 /// @note The methods "TouchPanelComputeCalibration", "TouchPanelReadable", and
WiredHome 77:9206c13aa527 621 /// indirectly the "TouchPanelSetMatrix" methods are all derived
WiredHome 77:9206c13aa527 622 /// from a program by Carlos E. Vidales. See the copyright note
WiredHome 77:9206c13aa527 623 /// for further details. See also the article
WiredHome 77:9206c13aa527 624 /// http://www.embedded.com/design/system-integration/4023968/How-To-Calibrate-Touch-Screens
WiredHome 77:9206c13aa527 625 ///
WiredHome 77:9206c13aa527 626 /// @copyright Copyright (c) 2001, Carlos E. Vidales. All rights reserved.
WiredHome 78:faf49c381591 627 /// This sample program was written and put in the public domain
WiredHome 78:faf49c381591 628 /// by Carlos E. Vidales. The program is provided "as is"
WiredHome 78:faf49c381591 629 /// without warranty of any kind, either expressed or implied.
WiredHome 78:faf49c381591 630 /// If you choose to use the program within your own products
WiredHome 78:faf49c381591 631 /// you do so at your own risk, and assume the responsibility
WiredHome 78:faf49c381591 632 /// for servicing, repairing or correcting the program should
WiredHome 78:faf49c381591 633 /// it prove defective in any manner.
WiredHome 78:faf49c381591 634 /// You may copy and distribute the program's source code in any
WiredHome 78:faf49c381591 635 /// medium, provided that you also include in each copy an
WiredHome 78:faf49c381591 636 /// appropriate copyright notice and disclaimer of warranty.
WiredHome 78:faf49c381591 637 /// You may also modify this program and distribute copies of
WiredHome 78:faf49c381591 638 /// it provided that you include prominent notices stating
WiredHome 78:faf49c381591 639 /// that you changed the file(s) and the date of any change,
WiredHome 78:faf49c381591 640 /// and that you do not charge any royalties or licenses for
WiredHome 78:faf49c381591 641 /// its use.
WiredHome 77:9206c13aa527 642 ///
WiredHome 77:9206c13aa527 643 /// @param[in] display is a pointer to a set of 3 points, which
WiredHome 77:9206c13aa527 644 /// are in display units of measure. These are the targets
WiredHome 77:9206c13aa527 645 /// the calibration was aiming for.
WiredHome 77:9206c13aa527 646 /// @param[in] screen is a pointer to a set of 3 points, which
WiredHome 77:9206c13aa527 647 /// are in touchscreen units of measure. These are the
WiredHome 77:9206c13aa527 648 /// registered touches.
WiredHome 77:9206c13aa527 649 /// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome 77:9206c13aa527 650 /// as a result of the calibration. This can be saved in
WiredHome 77:9206c13aa527 651 /// non-volatile memory to recover the calibration after a power fail.
WiredHome 77:9206c13aa527 652 /// @returns success/failure code. @see RetCode_t.
WiredHome 77:9206c13aa527 653 ///
WiredHome 81:01da2e34283d 654 RetCode_t TouchPanelComputeCalibration(point_t display[3], point_t screen[3], tpMatrix_t * matrix);
WiredHome 81:01da2e34283d 655
WiredHome 81:01da2e34283d 656
WiredHome 81:01da2e34283d 657 /// Perform the touch panel calibration process.
WiredHome 81:01da2e34283d 658 ///
WiredHome 81:01da2e34283d 659 /// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome 81:01da2e34283d 660 /// The process will automatically generate the calibration points, present
WiredHome 81:01da2e34283d 661 /// the targets on-screen, detect the touches, compute the calibration
WiredHome 81:01da2e34283d 662 /// matrix, and optionally provide the calibration matrix to the calling code
WiredHome 81:01da2e34283d 663 /// for persistence in non-volatile memory.
WiredHome 81:01da2e34283d 664 ///
WiredHome 81:01da2e34283d 665 /// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome 81:01da2e34283d 666 /// as a result of the calibration. This can be saved in
WiredHome 81:01da2e34283d 667 /// non-volatile memory to recover the calibration after a power fail.
WiredHome 81:01da2e34283d 668 /// @returns success/failure code. @see RetCode_t.
WiredHome 81:01da2e34283d 669 ///
WiredHome 85:022bba13c5c4 670 RetCode_t TouchPanelCalibrate(tpMatrix_t * matrix = NULL);
WiredHome 81:01da2e34283d 671
WiredHome 81:01da2e34283d 672 /// Perform the touch panel calibration process.
WiredHome 81:01da2e34283d 673 ///
WiredHome 81:01da2e34283d 674 /// This method provides the easy "shortcut" to calibrating the touch panel.
WiredHome 81:01da2e34283d 675 /// The process will automatically generate the calibration points, present
WiredHome 81:01da2e34283d 676 /// the targets on-screen, detect the touches, compute the calibration
WiredHome 81:01da2e34283d 677 /// matrix, and optionally provide the calibration matrix to the calling code
WiredHome 81:01da2e34283d 678 /// for persistence in non-volatile memory.
WiredHome 81:01da2e34283d 679 ///
WiredHome 81:01da2e34283d 680 /// @param[in] msg is a text message to present on the screen during the
WiredHome 81:01da2e34283d 681 /// calibration process.
WiredHome 81:01da2e34283d 682 /// @param[out] matrix is an optional parameter to hold the calibration matrix
WiredHome 81:01da2e34283d 683 /// as a result of the calibration. This can be saved in
WiredHome 81:01da2e34283d 684 /// non-volatile memory to recover the calibration after a power fail.
WiredHome 88:bfddef6ec836 685 /// @param[in] maxwait_s is the maximum number of seconds to wait for a touch
WiredHome 88:bfddef6ec836 686 /// calibration. If no touch panel installed, it then reports
WiredHome 88:bfddef6ec836 687 /// touch_cal_timeout.
WiredHome 81:01da2e34283d 688 /// @returns success/failure code. @see RetCode_t.
WiredHome 81:01da2e34283d 689 ///
WiredHome 88:bfddef6ec836 690 RetCode_t TouchPanelCalibrate(const char * msg, tpMatrix_t * matrix = NULL, int maxwait_s = 15);
WiredHome 77:9206c13aa527 691
WiredHome 77:9206c13aa527 692 /// Set the calibration matrix for the touch panel.
WiredHome 77:9206c13aa527 693 ///
WiredHome 77:9206c13aa527 694 /// This method is used to set the calibration matrix for the touch panel. After
WiredHome 81:01da2e34283d 695 /// performing the calibration (@see TouchPanelComputeCalibration), the matrix can be stored.
WiredHome 77:9206c13aa527 696 /// On a subsequence power cycle, the matrix may be restored from non-volatile and
WiredHome 77:9206c13aa527 697 /// passed in to this method. It will then be held to perform the corrections when
WiredHome 77:9206c13aa527 698 /// reading the touch panel point.
WiredHome 77:9206c13aa527 699 ///
WiredHome 78:faf49c381591 700 /// @code
WiredHome 78:faf49c381591 701 /// FILE * fh = fopen("/local/tpmatrix.cfg", "r");
WiredHome 78:faf49c381591 702 /// if (fh) {
WiredHome 78:faf49c381591 703 /// tpMatrix_t matrix;
WiredHome 78:faf49c381591 704 /// if (fread(fh, &matrix, sizeof(tpMatrix_t))) {
WiredHome 78:faf49c381591 705 /// lcd.TouchPanelSetMatrix(&matrix);
WiredHome 78:faf49c381591 706 /// }
WiredHome 78:faf49c381591 707 /// fclose(fh);
WiredHome 78:faf49c381591 708 /// }
WiredHome 78:faf49c381591 709 /// @endcode
WiredHome 78:faf49c381591 710 ///
WiredHome 77:9206c13aa527 711 /// @param[in] matrix is a pointer to the touch panel calibration matrix.
WiredHome 77:9206c13aa527 712 /// @returns success/failure code. @see RetCode_t.
WiredHome 77:9206c13aa527 713 ///
WiredHome 77:9206c13aa527 714 RetCode_t TouchPanelSetMatrix(tpMatrix_t * matrix);
WiredHome 78:faf49c381591 715
WiredHome 75:ca78388cfd77 716 #if 0
hexley 54:e117ad10fba6 717 /// Append interrupt handler for specific RA8875 interrupt source
hexley 54:e117ad10fba6 718 ///
hexley 54:e117ad10fba6 719 /// @param[in] bISRType Interrupt Source, should be:
hexley 54:e117ad10fba6 720 /// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley 54:e117ad10fba6 721 /// - RA8875_INT_DMA: DMA interrupt
hexley 54:e117ad10fba6 722 /// - RA8875_INT_TP: Touch panel interrupt
hexley 54:e117ad10fba6 723 /// - RA8875_INT_BTE: BTE process complete interrupt
hexley 54:e117ad10fba6 724 /// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
WiredHome 56:7a85d226ad0d 725 /// @param[in] fptr is a callback function to handle the interrupt event.
WiredHome 56:7a85d226ad0d 726 /// @returns none
hexley 54:e117ad10fba6 727 ///
hexley 54:e117ad10fba6 728 void AppendISR(uint8_t bISRType, void(*fptr)(void));
hexley 54:e117ad10fba6 729
hexley 54:e117ad10fba6 730 /// Unappend interrupt handler for specific RA8875 interrupt source
hexley 54:e117ad10fba6 731 ///
hexley 54:e117ad10fba6 732 /// @param[in] bISRType Interrupt Source, should be:
hexley 54:e117ad10fba6 733 /// - RA8875_INT_KEYSCAN: KEYCAN interrupt
hexley 54:e117ad10fba6 734 /// - RA8875_INT_DMA: DMA interrupt
hexley 54:e117ad10fba6 735 /// - RA8875_INT_TP: Touch panel interrupt
hexley 54:e117ad10fba6 736 /// - RA8875_INT_BTE: BTE process complete interrupt
hexley 54:e117ad10fba6 737 /// - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)
hexley 54:e117ad10fba6 738 /// @return none
hexley 54:e117ad10fba6 739 ///
hexley 54:e117ad10fba6 740 void UnAppendISR(uint8_t bISRType);
WiredHome 75:ca78388cfd77 741 #endif
WiredHome 77:9206c13aa527 742
WiredHome 71:dcac8efd842d 743 /// Initialize the keypad interface on the RA8875 controller.
WiredHome 71:dcac8efd842d 744 ///
WiredHome 71:dcac8efd842d 745 /// Enables the keypad subsystem. It will scan the 4 x 5 matrix
WiredHome 71:dcac8efd842d 746 /// and make available key presses.
WiredHome 71:dcac8efd842d 747 ///
WiredHome 71:dcac8efd842d 748 /// @note See section 5-13 of RAIO RA8875 data sheet for more details.
WiredHome 71:dcac8efd842d 749 /// @caution When using the display from buy-display.com, be sure that
WiredHome 71:dcac8efd842d 750 /// the option for the keypad is configured on the hardware.
WiredHome 71:dcac8efd842d 751 ///
WiredHome 71:dcac8efd842d 752 /// All parameters are optional.
WiredHome 76:c981284eb513 753 /// @param[in] scanEnable when true, enables the key scan function (default: true).
WiredHome 76:c981284eb513 754 /// @param[in] longDetect when true, additionally enables the long key held detection (default: false).
WiredHome 71:dcac8efd842d 755 /// @param[in] sampleTime setting (range: 0 - 3, default: 0).
WiredHome 71:dcac8efd842d 756 /// @param[in] scanFrequency setting (range: 0 - 7, default: 0).
WiredHome 71:dcac8efd842d 757 /// @param[in] longTimeAdjustment (range: 0 - 3, default: 0).
WiredHome 76:c981284eb513 758 /// @param[in] interruptEnable when true, enables interrupts from keypress (default: false).
WiredHome 76:c981284eb513 759 /// @param[in] wakeupEnable when true, activates the wakeup function (default: false).
WiredHome 71:dcac8efd842d 760 ///
WiredHome 71:dcac8efd842d 761 /// @returns success/failure code. @see RetCode_t.
WiredHome 71:dcac8efd842d 762 ///
WiredHome 71:dcac8efd842d 763 RetCode_t KeypadInit(bool scanEnable = true, bool longDetect = false,
WiredHome 71:dcac8efd842d 764 uint8_t sampleTime = 0, uint8_t scanFrequency = 0,
WiredHome 71:dcac8efd842d 765 uint8_t longTimeAdjustment = 0,
WiredHome 71:dcac8efd842d 766 bool interruptEnable = false, bool wakeupEnable = false);
WiredHome 71:dcac8efd842d 767
WiredHome 75:ca78388cfd77 768 /// Create Key Code definitions for the key matrix.
WiredHome 75:ca78388cfd77 769 ///
WiredHome 75:ca78388cfd77 770 /// This API provides a table of 22 key-code assignments for the matrix of keys.
WiredHome 75:ca78388cfd77 771 /// This can be used to translate the keys 1 - 20 into some other value, as
WiredHome 75:ca78388cfd77 772 /// well as to communicate the "no key" (zero) and "error state" (21).
WiredHome 75:ca78388cfd77 773 ///
WiredHome 75:ca78388cfd77 774 /// In this way, a keypad could easily emulate a piece of a keyboard, transforming
WiredHome 75:ca78388cfd77 775 /// 0 - 20 into the values 0, '0', '1', '2', '3', '4', '5', '6', '7', '8',
WiredHome 75:ca78388cfd77 776 /// '9', '+', '-', '*' , '/', '=', '<bs>', '<cr>', and so on...
WiredHome 75:ca78388cfd77 777 ///
WiredHome 75:ca78388cfd77 778 /// @code
WiredHome 75:ca78388cfd77 779 /// // Return Value by Row, Column Example reassignment
WiredHome 75:ca78388cfd77 780 /// // Column 0 1 2 3 4
WiredHome 75:ca78388cfd77 781 /// // +-------------------------+ +-------------------------+
WiredHome 76:c981284eb513 782 /// // Row 0 | 1 2 3 4 5 | | '7' '8' '9' ',' '<-' |
WiredHome 75:ca78388cfd77 783 /// // 1 | 6 7 8 9 10 | | '4' '5' '6' '/' '-' |
WiredHome 75:ca78388cfd77 784 /// // 2 | 11 12 13 14 15 | | '1' '2' '3' '*' '+' |
WiredHome 76:c981284eb513 785 /// // 3 | 16 17 18 19 20 | | '0' '.' '(' ')' '\n' |
WiredHome 75:ca78388cfd77 786 /// // +-------------------------+ +-------------------------+
WiredHome 75:ca78388cfd77 787 /// // Return value 0 = No Key pressed
WiredHome 75:ca78388cfd77 788 /// // Return value 21 = Error
WiredHome 77:9206c13aa527 789 /// const uint8_t CodeList[22] =
WiredHome 77:9206c13aa527 790 /// {0, '7', '8', '9', ',', '\h',
WiredHome 77:9206c13aa527 791 /// '4', '5', '6', '/', '-',
WiredHome 77:9206c13aa527 792 /// '1', '2', '3', '*', '+',
WiredHome 77:9206c13aa527 793 /// '0', '.', '(', ')', '\n',
WiredHome 77:9206c13aa527 794 /// '\x1b'};
WiredHome 77:9206c13aa527 795 /// lcd.SetKeyMap(CodeList);
WiredHome 75:ca78388cfd77 796 /// @endcode
WiredHome 75:ca78388cfd77 797 ///
WiredHome 75:ca78388cfd77 798 /// @param[in] CodeList is a pointer to an always available byte-array
WiredHome 75:ca78388cfd77 799 /// where the first 22 bytes are used as the transformation
WiredHome 75:ca78388cfd77 800 /// from raw code to your reassigned value.
WiredHome 75:ca78388cfd77 801 /// If CodeList is NULL, the original raw value key map is
WiredHome 75:ca78388cfd77 802 /// restored.
WiredHome 75:ca78388cfd77 803 /// @returns noerror.
WiredHome 75:ca78388cfd77 804 ///
WiredHome 75:ca78388cfd77 805 RetCode_t SetKeyMap(const uint8_t * CodeList = NULL);
WiredHome 75:ca78388cfd77 806
WiredHome 71:dcac8efd842d 807 /// Determine if a key has been hit
WiredHome 71:dcac8efd842d 808 ///
WiredHome 71:dcac8efd842d 809 /// @returns true if a key has been hit
WiredHome 71:dcac8efd842d 810 ///
WiredHome 75:ca78388cfd77 811 bool readable();
WiredHome 71:dcac8efd842d 812
WiredHome 71:dcac8efd842d 813 /// Blocking read of the keypad.
WiredHome 71:dcac8efd842d 814 ///
WiredHome 71:dcac8efd842d 815 /// @caution: This is a blocking read, so it is important to first call _kbhit()
WiredHome 71:dcac8efd842d 816 /// to avoid hanging your processes.
WiredHome 71:dcac8efd842d 817 ///
WiredHome 71:dcac8efd842d 818 /// A keypad connected to the RA8875 is connected in a matrix of 4 rows and 5 columns.
WiredHome 75:ca78388cfd77 819 /// When pressed, this method will return a code in the range of 1 through 20, reserving
WiredHome 75:ca78388cfd77 820 /// the value 0 to indicate that no key is pressed.
WiredHome 71:dcac8efd842d 821 ///
WiredHome 71:dcac8efd842d 822 /// Additionally, if configured to detect a "long press", bit 7 will be set to indicate
WiredHome 71:dcac8efd842d 823 /// this. In this situation, first a "normal press" would be detected and signaled and
WiredHome 71:dcac8efd842d 824 /// soon after that a "long press" of the same key would be detected and communicated.
WiredHome 71:dcac8efd842d 825 ///
WiredHome 75:ca78388cfd77 826 /// @return 8-bit where bit 7 indicates a long press. The remaining bits indicate the
WiredHome 75:ca78388cfd77 827 /// keypress using 0 = no key pressed, 1 - 20 = the key pressed.
WiredHome 71:dcac8efd842d 828 ///
WiredHome 75:ca78388cfd77 829 uint8_t getc();
WiredHome 75:ca78388cfd77 830
WiredHome 82:f7d300f26540 831
WiredHome 82:f7d300f26540 832 /// Determine if a point is within a rectangle.
WiredHome 82:f7d300f26540 833 ///
WiredHome 82:f7d300f26540 834 /// @param[in] rect is a rectangular region to use.
WiredHome 82:f7d300f26540 835 /// @param[in] p is a point to analyze to see if it is within the rect.
WiredHome 82:f7d300f26540 836 /// @returns true if p is within rect.
WiredHome 82:f7d300f26540 837 ///
WiredHome 82:f7d300f26540 838 bool Intersect(rect_t rect, point_t p);
WiredHome 82:f7d300f26540 839
WiredHome 82:f7d300f26540 840
WiredHome 38:38d503b4fad6 841 /// Write a command to the display with a word of data.
WiredHome 38:38d503b4fad6 842 ///
WiredHome 38:38d503b4fad6 843 /// This is a high level command, and may invoke several primitives.
WiredHome 38:38d503b4fad6 844 ///
WiredHome 72:ecffe56af969 845 /// @param[in] command is the command to write.
WiredHome 72:ecffe56af969 846 /// @param[in] data is data to be written to the command register.
WiredHome 38:38d503b4fad6 847 /// @returns success/failure code. @see RetCode_t.
WiredHome 38:38d503b4fad6 848 ///
WiredHome 38:38d503b4fad6 849 RetCode_t WriteCommandW(uint8_t command, uint16_t data);
WiredHome 38:38d503b4fad6 850
WiredHome 19:3f82c1161fd2 851 /// Write a command to the display
WiredHome 19:3f82c1161fd2 852 ///
WiredHome 19:3f82c1161fd2 853 /// This is a high level command, and may invoke several primitives.
WiredHome 19:3f82c1161fd2 854 ///
WiredHome 72:ecffe56af969 855 /// @param[in] command is the command to write.
WiredHome 72:ecffe56af969 856 /// @param[in] data is optional data to be written to the command register
WiredHome 19:3f82c1161fd2 857 /// and only occurs if the data is in the range [0 - 0xFF].
WiredHome 19:3f82c1161fd2 858 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 859 ///
WiredHome 32:0e4f2ae512e2 860 virtual RetCode_t WriteCommand(unsigned char command, unsigned int data = 0xFFFF);
WiredHome 19:3f82c1161fd2 861
WiredHome 38:38d503b4fad6 862 /// Write a data word to the display
WiredHome 38:38d503b4fad6 863 ///
WiredHome 38:38d503b4fad6 864 /// This is a high level command, and may invoke several primitives.
WiredHome 38:38d503b4fad6 865 ///
WiredHome 72:ecffe56af969 866 /// @param[in] data is the data to write.
WiredHome 38:38d503b4fad6 867 /// @returns success/failure code. @see RetCode_t.
WiredHome 38:38d503b4fad6 868 ///
WiredHome 38:38d503b4fad6 869 RetCode_t WriteDataW(uint16_t data);
WiredHome 38:38d503b4fad6 870
WiredHome 19:3f82c1161fd2 871 /// Write a data byte to the display
WiredHome 19:3f82c1161fd2 872 ///
WiredHome 19:3f82c1161fd2 873 /// This is a high level command, and may invoke several primitives.
WiredHome 19:3f82c1161fd2 874 ///
WiredHome 72:ecffe56af969 875 /// @param[in] data is the data to write.
WiredHome 19:3f82c1161fd2 876 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 877 ///
WiredHome 32:0e4f2ae512e2 878 virtual RetCode_t WriteData(unsigned char data);
WiredHome 19:3f82c1161fd2 879
WiredHome 19:3f82c1161fd2 880 /// Read a command register
WiredHome 19:3f82c1161fd2 881 ///
WiredHome 72:ecffe56af969 882 /// @param[in] command is the command register to read.
WiredHome 19:3f82c1161fd2 883 /// @returns the value read from the register.
WiredHome 19:3f82c1161fd2 884 ///
WiredHome 19:3f82c1161fd2 885 unsigned char ReadCommand(unsigned char command);
WiredHome 19:3f82c1161fd2 886
WiredHome 41:2956a0a221e5 887 /// Read a data byte from the display
WiredHome 19:3f82c1161fd2 888 ///
WiredHome 19:3f82c1161fd2 889 /// This is a high level command, and may invoke several primitives.
WiredHome 19:3f82c1161fd2 890 ///
WiredHome 19:3f82c1161fd2 891 /// @returns data that was read.
WiredHome 19:3f82c1161fd2 892 ///
WiredHome 19:3f82c1161fd2 893 unsigned char ReadData(void);
WiredHome 19:3f82c1161fd2 894
WiredHome 41:2956a0a221e5 895 /// Read a word from the display
WiredHome 41:2956a0a221e5 896 ///
WiredHome 41:2956a0a221e5 897 /// This is a high level command, and may invoke several primitives.
WiredHome 41:2956a0a221e5 898 ///
WiredHome 41:2956a0a221e5 899 /// @returns data that was read.
WiredHome 41:2956a0a221e5 900 ///
WiredHome 41:2956a0a221e5 901 uint16_t ReadDataW(void);
WiredHome 41:2956a0a221e5 902
WiredHome 19:3f82c1161fd2 903 /// Read the display status
WiredHome 19:3f82c1161fd2 904 ///
WiredHome 19:3f82c1161fd2 905 /// This is a high level command, and may invoke several primitives.
WiredHome 19:3f82c1161fd2 906 ///
WiredHome 19:3f82c1161fd2 907 /// @returns data that was read.
WiredHome 19:3f82c1161fd2 908 ///
WiredHome 19:3f82c1161fd2 909 unsigned char ReadStatus(void);
WiredHome 19:3f82c1161fd2 910
WiredHome 19:3f82c1161fd2 911 /// get the width in pixels of the currently active font
WiredHome 19:3f82c1161fd2 912 ///
WiredHome 19:3f82c1161fd2 913 /// @returns font width in pixels.
WiredHome 19:3f82c1161fd2 914 ///
WiredHome 37:f19b7e7449dc 915 dim_t fontwidth(void);
WiredHome 19:3f82c1161fd2 916
WiredHome 19:3f82c1161fd2 917 /// get the height in pixels of the currently active font
WiredHome 19:3f82c1161fd2 918 ///
WiredHome 19:3f82c1161fd2 919 /// @returns font height in pixels.
WiredHome 19:3f82c1161fd2 920 ///
WiredHome 37:f19b7e7449dc 921 dim_t fontheight(void);
WiredHome 19:3f82c1161fd2 922
WiredHome 19:3f82c1161fd2 923 /// get the number of colums based on the currently active font
WiredHome 19:3f82c1161fd2 924 ///
WiredHome 19:3f82c1161fd2 925 /// @returns number of columns.
WiredHome 19:3f82c1161fd2 926 ///
WiredHome 19:3f82c1161fd2 927 virtual int columns(void);
WiredHome 19:3f82c1161fd2 928
WiredHome 19:3f82c1161fd2 929 /// get the number of rows based on the currently active font
WiredHome 19:3f82c1161fd2 930 ///
WiredHome 19:3f82c1161fd2 931 /// @returns number of rows.
WiredHome 19:3f82c1161fd2 932 ///
WiredHome 19:3f82c1161fd2 933 virtual int rows(void);
WiredHome 19:3f82c1161fd2 934
WiredHome 19:3f82c1161fd2 935 /// get the screen width in pixels
WiredHome 19:3f82c1161fd2 936 ///
WiredHome 19:3f82c1161fd2 937 /// @returns screen width in pixels.
WiredHome 19:3f82c1161fd2 938 ///
WiredHome 38:38d503b4fad6 939 virtual dim_t width(void);
WiredHome 19:3f82c1161fd2 940
WiredHome 19:3f82c1161fd2 941 /// get the screen height in pixels
WiredHome 19:3f82c1161fd2 942 ///
WiredHome 19:3f82c1161fd2 943 /// @returns screen height in pixels.
WiredHome 19:3f82c1161fd2 944 ///
WiredHome 38:38d503b4fad6 945 virtual dim_t height(void);
WiredHome 19:3f82c1161fd2 946
WiredHome 43:3becae133285 947 /// get the color depth in bits per pixel.
WiredHome 43:3becae133285 948 ///
WiredHome 43:3becae133285 949 /// @returns 8 or 16 only.
WiredHome 43:3becae133285 950 ///
WiredHome 43:3becae133285 951 virtual dim_t color_bpp(void);
WiredHome 43:3becae133285 952
WiredHome 19:3f82c1161fd2 953 /// Set cursor position based on the current font size.
WiredHome 19:3f82c1161fd2 954 ///
WiredHome 72:ecffe56af969 955 /// @param[in] column is the horizontal position in character positions
WiredHome 72:ecffe56af969 956 /// @param[in] row is the vertical position in character positions
WiredHome 19:3f82c1161fd2 957 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 958 ///
WiredHome 37:f19b7e7449dc 959 virtual RetCode_t locate(textloc_t column, textloc_t row);
WiredHome 19:3f82c1161fd2 960
WiredHome 19:3f82c1161fd2 961 /// Prepare the controller to write text to the screen by positioning
WiredHome 19:3f82c1161fd2 962 /// the cursor.
WiredHome 19:3f82c1161fd2 963 ///
WiredHome 56:7a85d226ad0d 964 /// @code
WiredHome 56:7a85d226ad0d 965 /// lcd.SetTextCursor(100, 25);
WiredHome 56:7a85d226ad0d 966 /// lcd.puts("Hello");
WiredHome 56:7a85d226ad0d 967 /// @endcode
WiredHome 56:7a85d226ad0d 968 ///
WiredHome 72:ecffe56af969 969 /// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome 72:ecffe56af969 970 /// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome 19:3f82c1161fd2 971 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 972 ///
WiredHome 37:f19b7e7449dc 973 RetCode_t SetTextCursor(loc_t x, loc_t y);
WiredHome 29:422616aa04bd 974
WiredHome 37:f19b7e7449dc 975 /// Get the current cursor position in pixels.
WiredHome 37:f19b7e7449dc 976 ///
WiredHome 56:7a85d226ad0d 977 /// @code
WiredHome 56:7a85d226ad0d 978 /// point_t point = GetTextCursor();
WiredHome 56:7a85d226ad0d 979 /// if (point.x > 100 && point.y > 150)
WiredHome 56:7a85d226ad0d 980 /// //...
WiredHome 56:7a85d226ad0d 981 /// @endcode
WiredHome 56:7a85d226ad0d 982 ///
WiredHome 37:f19b7e7449dc 983 /// @returns cursor position.
WiredHome 37:f19b7e7449dc 984 ///
WiredHome 37:f19b7e7449dc 985 point_t GetTextCursor(void);
WiredHome 37:f19b7e7449dc 986
WiredHome 29:422616aa04bd 987 /// Get the current cursor horizontal position in pixels.
WiredHome 29:422616aa04bd 988 ///
WiredHome 29:422616aa04bd 989 /// @returns cursor position horizontal offset.
WiredHome 29:422616aa04bd 990 ///
WiredHome 37:f19b7e7449dc 991 loc_t GetTextCursor_X(void);
WiredHome 29:422616aa04bd 992
WiredHome 29:422616aa04bd 993 /// Get the current cursor vertical position in pixels.
WiredHome 29:422616aa04bd 994 ///
WiredHome 29:422616aa04bd 995 /// @returns cursor position vertical offset.
WiredHome 29:422616aa04bd 996 ///
WiredHome 37:f19b7e7449dc 997 loc_t GetTextCursor_Y(void);
WiredHome 29:422616aa04bd 998
WiredHome 23:a50ded45dbaf 999 /// Configure additional Cursor Control settings.
WiredHome 23:a50ded45dbaf 1000 ///
WiredHome 23:a50ded45dbaf 1001 /// This API lets you modify other cursor control settings;
WiredHome 23:a50ded45dbaf 1002 /// Cursor visible/hidden, Cursor blink/normal,
WiredHome 23:a50ded45dbaf 1003 /// Cursor I-Beam/underscore/box.
WiredHome 23:a50ded45dbaf 1004 ///
WiredHome 72:ecffe56af969 1005 /// @param[in] cursor can be set to NOCURSOR (default), IBEAM,
WiredHome 24:8ca861acf12d 1006 /// UNDER, or BLOCK.
WiredHome 72:ecffe56af969 1007 /// @param[in] blink can be set to true or false (default false)
WiredHome 23:a50ded45dbaf 1008 /// @returns success/failure code. @see RetCode_t
WiredHome 23:a50ded45dbaf 1009 ///
WiredHome 24:8ca861acf12d 1010 RetCode_t SetTextCursorControl(cursor_t cursor = NOCURSOR, bool blink = false);
WiredHome 23:a50ded45dbaf 1011
WiredHome 98:ecebed9b80b2 1012 /// Select the built-in ISO 8859-X font to use next.
WiredHome 19:3f82c1161fd2 1013 ///
WiredHome 19:3f82c1161fd2 1014 /// Supported fonts: ISO 8859-1, -2, -3, -4
WiredHome 19:3f82c1161fd2 1015 ///
WiredHome 98:ecebed9b80b2 1016 /// @caution This only modifies the choice of font from the RA8875 internal
WiredHome 98:ecebed9b80b2 1017 /// fonts.
WiredHome 98:ecebed9b80b2 1018 ///
WiredHome 72:ecffe56af969 1019 /// @param[in] font selects the font for the subsequent text rendering.
WiredHome 19:3f82c1161fd2 1020 ///
WiredHome 19:3f82c1161fd2 1021 /// @note if either hScale or vScale is outside of its permitted range,
WiredHome 19:3f82c1161fd2 1022 /// the command is not executed.
WiredHome 19:3f82c1161fd2 1023 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1024 ///
WiredHome 19:3f82c1161fd2 1025 RetCode_t SetTextFont(font_t font = ISO8859_1);
WiredHome 19:3f82c1161fd2 1026
WiredHome 84:e102021864b5 1027 /// Sets the display orientation.
WiredHome 84:e102021864b5 1028 ///
WiredHome 84:e102021864b5 1029 /// @note This command does not let you "merge" text onto an existing
WiredHome 84:e102021864b5 1030 /// image, since it reuses the memory for the new orientation.
WiredHome 84:e102021864b5 1031 /// Therefore, it is recommended that you issue a cls() prior
WiredHome 84:e102021864b5 1032 /// to sending text to the screen, or you end with a blended
WiredHome 84:e102021864b5 1033 /// image that is probably not as intended.
WiredHome 84:e102021864b5 1034 ///
WiredHome 98:ecebed9b80b2 1035 /// @caution This command only operates on the RA8875 internal fonts.
WiredHome 98:ecebed9b80b2 1036 ///
WiredHome 84:e102021864b5 1037 /// @code
WiredHome 84:e102021864b5 1038 /// lcd.cls();
WiredHome 84:e102021864b5 1039 /// lcd.SetOrientation(RA8875::normal);
WiredHome 84:e102021864b5 1040 /// lcd.puts(30,30, "Normal Landscape");
WiredHome 84:e102021864b5 1041 /// wait_ms(2500);
WiredHome 84:e102021864b5 1042 ///
WiredHome 84:e102021864b5 1043 /// lcd.cls();
WiredHome 84:e102021864b5 1044 /// lcd.SetOrientation(RA8875::rotate_90);
WiredHome 84:e102021864b5 1045 /// lcd.puts(30,30, "Rotated 90 Text\r\n");
WiredHome 84:e102021864b5 1046 /// wait_ms(2500);
WiredHome 84:e102021864b5 1047 ///
WiredHome 84:e102021864b5 1048 /// lcd.cls();
WiredHome 84:e102021864b5 1049 /// lcd.SetOrientation(RA8875::rotate_180);
WiredHome 84:e102021864b5 1050 /// lcd.puts(30,30, "Rotated 180 Text\r\n");
WiredHome 84:e102021864b5 1051 /// wait_ms(2500);
WiredHome 84:e102021864b5 1052 ///
WiredHome 84:e102021864b5 1053 /// lcd.cls();
WiredHome 84:e102021864b5 1054 /// lcd.SetOrientation(RA8875::rotate_270);
WiredHome 84:e102021864b5 1055 /// lcd.puts(30,30, "Rotated 270 Text\r\n");
WiredHome 84:e102021864b5 1056 /// wait_ms(2500);
WiredHome 84:e102021864b5 1057 /// @endcode
WiredHome 84:e102021864b5 1058 ///
WiredHome 84:e102021864b5 1059 /// @param[in] angle defaults to normal, but can be rotated
WiredHome 84:e102021864b5 1060 /// - normal | rotate_0
WiredHome 84:e102021864b5 1061 /// - rotate_90 (clockwise)
WiredHome 84:e102021864b5 1062 /// - rotate_180
WiredHome 84:e102021864b5 1063 /// - rotate_270 (clockwise)
WiredHome 84:e102021864b5 1064 /// @returns success/failure code. @see RetCode_t.
WiredHome 84:e102021864b5 1065 ///
WiredHome 84:e102021864b5 1066 RetCode_t SetOrientation(orientation_t angle = normal);
WiredHome 84:e102021864b5 1067
WiredHome 19:3f82c1161fd2 1068 /// Control the font behavior.
WiredHome 19:3f82c1161fd2 1069 ///
WiredHome 19:3f82c1161fd2 1070 /// This command lets you make several modifications to any text that
WiredHome 56:7a85d226ad0d 1071 /// will be written to the screen.
WiredHome 19:3f82c1161fd2 1072 ///
WiredHome 98:ecebed9b80b2 1073 /// @caution This command only operates on the RA8875 internal fonts.
WiredHome 98:ecebed9b80b2 1074 ///
WiredHome 19:3f82c1161fd2 1075 /// Options can be combined:
WiredHome 19:3f82c1161fd2 1076 /// Default:
WiredHome 19:3f82c1161fd2 1077 /// @li Full alignment disabled,
WiredHome 19:3f82c1161fd2 1078 /// @li Font with Background color,
WiredHome 84:e102021864b5 1079 /// @li Font in normal orientiation, or rotated 90, 180, or 270 clockwise,
WiredHome 84:e102021864b5 1080 /// @li Horizontal scale x 1, 2, 3, or 4
WiredHome 84:e102021864b5 1081 /// @li Vertical scale x 1, 2, 3, or 4
WiredHome 84:e102021864b5 1082 ///
WiredHome 84:e102021864b5 1083 /// @note alignment is a special mode for the fonts, when mixing half and
WiredHome 84:e102021864b5 1084 /// full fonts on one presentation. 'align_full' starts each full
WiredHome 84:e102021864b5 1085 /// character on an even alignment. See section 7-4-7 of the RA8875
WiredHome 84:e102021864b5 1086 /// specification.
WiredHome 19:3f82c1161fd2 1087 ///
WiredHome 72:ecffe56af969 1088 /// @param[in] fillit defaults to FILL, but can be NOFILL
WiredHome 72:ecffe56af969 1089 /// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome 19:3f82c1161fd2 1090 /// and scales the font size by this amount.
WiredHome 72:ecffe56af969 1091 /// @param[in] vScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome 19:3f82c1161fd2 1092 /// and scales the font size by this amount.
WiredHome 72:ecffe56af969 1093 /// @param[in] alignment defaults to align_none, but can be
WiredHome 19:3f82c1161fd2 1094 /// align_full.
WiredHome 19:3f82c1161fd2 1095 ///
WiredHome 19:3f82c1161fd2 1096 /// @note if either hScale or vScale is outside of its permitted range,
WiredHome 19:3f82c1161fd2 1097 /// the command is not executed.
WiredHome 19:3f82c1161fd2 1098 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1099 ///
WiredHome 19:3f82c1161fd2 1100 RetCode_t SetTextFontControl(fill_t fillit = FILL,
WiredHome 19:3f82c1161fd2 1101 HorizontalScale hScale = 1,
WiredHome 19:3f82c1161fd2 1102 VerticalScale vScale = 1,
WiredHome 19:3f82c1161fd2 1103 alignment_t alignment = align_none);
WiredHome 19:3f82c1161fd2 1104
WiredHome 98:ecebed9b80b2 1105 /// Control the font size of the RA8875 internal fonts.
WiredHome 19:3f82c1161fd2 1106 ///
WiredHome 19:3f82c1161fd2 1107 /// This command lets you set the font enlargement for both horizontal
WiredHome 19:3f82c1161fd2 1108 /// and vertical, independent of the rotation, background, and
WiredHome 19:3f82c1161fd2 1109 /// alignment. @see SetTextFontControl.
WiredHome 19:3f82c1161fd2 1110 ///
WiredHome 98:ecebed9b80b2 1111 /// @caution This command only operates on the RA8875 internal fonts.
WiredHome 98:ecebed9b80b2 1112 ///
WiredHome 72:ecffe56af969 1113 /// @param[in] hScale defaults to 1, but can be 1, 2, 3, or 4,
WiredHome 19:3f82c1161fd2 1114 /// and scales the font size by this amount.
WiredHome 72:ecffe56af969 1115 /// @param[in] vScale is an optional parameter that defaults to the hScale value,
WiredHome 40:04aa280dfa39 1116 /// but can be 1, 2, 3, or 4, and scales the font size by this amount.
WiredHome 40:04aa280dfa39 1117 ///
WiredHome 40:04aa280dfa39 1118 /// @code
WiredHome 40:04aa280dfa39 1119 /// lcd.SetTextFontSize(2); // Set the font to 2x normal size
WiredHome 56:7a85d226ad0d 1120 /// lcd.puts("Two times");
WiredHome 40:04aa280dfa39 1121 /// lcd.SetTextFontSize(2,3); // Set the font to 2x Width and 3x Height
WiredHome 56:7a85d226ad0d 1122 /// lcd.puts("2*2 3*h");
WiredHome 40:04aa280dfa39 1123 /// lcd.SetTextFontSize(); // Restore to normal size in both dimensions
WiredHome 56:7a85d226ad0d 1124 /// lcd.puts("normal");
WiredHome 40:04aa280dfa39 1125 /// @endcode
WiredHome 19:3f82c1161fd2 1126 ///
WiredHome 19:3f82c1161fd2 1127 /// @note if either hScale or vScale is outside of its permitted range,
WiredHome 19:3f82c1161fd2 1128 /// the command is not executed.
WiredHome 19:3f82c1161fd2 1129 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1130 ///
WiredHome 40:04aa280dfa39 1131 RetCode_t SetTextFontSize(HorizontalScale hScale = 1, VerticalScale vScale = -1);
WiredHome 19:3f82c1161fd2 1132
WiredHome 19:3f82c1161fd2 1133 /// put a character on the screen.
WiredHome 19:3f82c1161fd2 1134 ///
WiredHome 72:ecffe56af969 1135 /// @param[in] c is the character.
WiredHome 19:3f82c1161fd2 1136 /// @returns the character, or EOF if there is an error.
WiredHome 19:3f82c1161fd2 1137 ///
WiredHome 19:3f82c1161fd2 1138 virtual int _putc(int c);
WiredHome 19:3f82c1161fd2 1139
WiredHome 19:3f82c1161fd2 1140 /// Write string of text to the display
WiredHome 19:3f82c1161fd2 1141 ///
WiredHome 56:7a85d226ad0d 1142 /// @code
WiredHome 56:7a85d226ad0d 1143 /// lcd.puts("Test STring");
WiredHome 56:7a85d226ad0d 1144 /// @endcode
WiredHome 56:7a85d226ad0d 1145 ///
WiredHome 72:ecffe56af969 1146 /// @param[in] string is the null terminated string to send to the display.
WiredHome 19:3f82c1161fd2 1147 ///
WiredHome 19:3f82c1161fd2 1148 void puts(const char * string);
WiredHome 19:3f82c1161fd2 1149
WiredHome 19:3f82c1161fd2 1150 /// Write string of text to the display at the specified location.
WiredHome 19:3f82c1161fd2 1151 ///
WiredHome 56:7a85d226ad0d 1152 /// @code
WiredHome 56:7a85d226ad0d 1153 /// lcd.puts(10,25, "Test STring");
WiredHome 56:7a85d226ad0d 1154 /// @endcode
WiredHome 56:7a85d226ad0d 1155 ///
WiredHome 72:ecffe56af969 1156 /// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome 72:ecffe56af969 1157 /// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome 72:ecffe56af969 1158 /// @param[in] string is the null terminated string to send to the display.
WiredHome 19:3f82c1161fd2 1159 ///
WiredHome 37:f19b7e7449dc 1160 void puts(loc_t x, loc_t y, const char * string);
WiredHome 19:3f82c1161fd2 1161
WiredHome 19:3f82c1161fd2 1162 /// Prepare the controller to write binary data to the screen by positioning
WiredHome 19:3f82c1161fd2 1163 /// the memory cursor.
WiredHome 19:3f82c1161fd2 1164 ///
WiredHome 72:ecffe56af969 1165 /// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome 72:ecffe56af969 1166 /// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome 19:3f82c1161fd2 1167 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1168 ///
WiredHome 37:f19b7e7449dc 1169 virtual RetCode_t SetGraphicsCursor(loc_t x, loc_t y);
WiredHome 19:3f82c1161fd2 1170
WiredHome 41:2956a0a221e5 1171 /// Prepare the controller to read binary data from the screen by positioning
WiredHome 41:2956a0a221e5 1172 /// the memory read cursor.
WiredHome 41:2956a0a221e5 1173 ///
WiredHome 72:ecffe56af969 1174 /// @param[in] x is the horizontal position in pixels (from the left edge)
WiredHome 72:ecffe56af969 1175 /// @param[in] y is the vertical position in pixels (from the top edge)
WiredHome 41:2956a0a221e5 1176 /// @returns success/failure code. @see RetCode_t.
WiredHome 41:2956a0a221e5 1177 ///
WiredHome 41:2956a0a221e5 1178 virtual RetCode_t SetGraphicsCursorRead(loc_t x, loc_t y);
WiredHome 41:2956a0a221e5 1179
WiredHome 19:3f82c1161fd2 1180 /// Set the window, which controls where items are written to the screen.
WiredHome 19:3f82c1161fd2 1181 ///
WiredHome 19:3f82c1161fd2 1182 /// When something hits the window width, it wraps back to the left side
WiredHome 19:3f82c1161fd2 1183 /// and down a row. If the initial write is outside the window, it will
WiredHome 19:3f82c1161fd2 1184 /// be captured into the window when it crosses a boundary.
WiredHome 19:3f82c1161fd2 1185 ///
WiredHome 56:7a85d226ad0d 1186 /// @code
WiredHome 56:7a85d226ad0d 1187 /// lcd.window(10,10, 80,80);
WiredHome 56:7a85d226ad0d 1188 /// lcd.puts("012345678901234567890123456789012345678901234567890");
WiredHome 56:7a85d226ad0d 1189 /// @endcode
WiredHome 56:7a85d226ad0d 1190 ///
WiredHome 72:ecffe56af969 1191 /// @param[in] x is the left edge in pixels.
WiredHome 72:ecffe56af969 1192 /// @param[in] y is the top edge in pixels.
WiredHome 72:ecffe56af969 1193 /// @param[in] width is the window width in pixels.
WiredHome 72:ecffe56af969 1194 /// @param[in] height is the window height in pixels.
WiredHome 19:3f82c1161fd2 1195 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1196 ///
WiredHome 37:f19b7e7449dc 1197 virtual RetCode_t window(loc_t x, loc_t y, dim_t width, dim_t height);
WiredHome 19:3f82c1161fd2 1198
WiredHome 61:8f3153bf0baa 1199 /// Clear either the specified layer, or the active layer.
WiredHome 19:3f82c1161fd2 1200 ///
WiredHome 61:8f3153bf0baa 1201 /// The behavior is to clear the whole screen for the specified
WiredHome 61:8f3153bf0baa 1202 /// layer. When not specified, the active drawing layer is cleared.
WiredHome 61:8f3153bf0baa 1203 /// This command can also be used to specifically clear either,
WiredHome 61:8f3153bf0baa 1204 /// or both layers. @see clsw().
WiredHome 19:3f82c1161fd2 1205 ///
WiredHome 56:7a85d226ad0d 1206 /// @code
WiredHome 56:7a85d226ad0d 1207 /// lcd.cls();
WiredHome 56:7a85d226ad0d 1208 /// @endcode
WiredHome 56:7a85d226ad0d 1209 ///
WiredHome 72:ecffe56af969 1210 /// @param[in] layers is optional. If not provided, the active layer
WiredHome 61:8f3153bf0baa 1211 /// is cleared. If bit 0 is set, layer 0 is cleared, if bit
WiredHome 61:8f3153bf0baa 1212 /// 1 is set, layer 1 is cleared. If both are set, both layers
WiredHome 61:8f3153bf0baa 1213 /// are cleared. Any other value does not cause an action.
WiredHome 61:8f3153bf0baa 1214 ///
WiredHome 19:3f82c1161fd2 1215 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1216 ///
WiredHome 61:8f3153bf0baa 1217 virtual RetCode_t cls(uint16_t layers = 0);
WiredHome 19:3f82c1161fd2 1218
WiredHome 19:3f82c1161fd2 1219 /// Clear the screen, or clear only the active window.
WiredHome 19:3f82c1161fd2 1220 ///
WiredHome 19:3f82c1161fd2 1221 /// The default behavior is to clear the whole screen. With the optional
WiredHome 19:3f82c1161fd2 1222 /// parameter, the action can be restricted to the active window, which
WiredHome 32:0e4f2ae512e2 1223 /// can be set with the @see window method.
WiredHome 19:3f82c1161fd2 1224 ///
WiredHome 56:7a85d226ad0d 1225 /// @code
WiredHome 56:7a85d226ad0d 1226 /// lcd.window(20,20, 40,10);
WiredHome 56:7a85d226ad0d 1227 /// lcd.clsw();
WiredHome 56:7a85d226ad0d 1228 /// @endcode
WiredHome 56:7a85d226ad0d 1229 ///
WiredHome 72:ecffe56af969 1230 /// @param[in] region is an optional parameter that defaults to FULLWINDOW
WiredHome 19:3f82c1161fd2 1231 /// or may be set to ACTIVEWINDOW.
WiredHome 19:3f82c1161fd2 1232 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1233 ///
WiredHome 19:3f82c1161fd2 1234 RetCode_t clsw(RA8875::Region_t region = FULLWINDOW);
WiredHome 19:3f82c1161fd2 1235
WiredHome 19:3f82c1161fd2 1236 /// Set the background color.
WiredHome 19:3f82c1161fd2 1237 ///
WiredHome 72:ecffe56af969 1238 /// @param[in] color is expressed in 16-bit format.
WiredHome 19:3f82c1161fd2 1239 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1240 ///
WiredHome 19:3f82c1161fd2 1241 virtual RetCode_t background(color_t color);
WiredHome 19:3f82c1161fd2 1242
WiredHome 19:3f82c1161fd2 1243 /// Set the background color.
WiredHome 19:3f82c1161fd2 1244 ///
WiredHome 72:ecffe56af969 1245 /// @param[in] r is the red element of the color.
WiredHome 72:ecffe56af969 1246 /// @param[in] g is the green element of the color.
WiredHome 72:ecffe56af969 1247 /// @param[in] b is the blue element of the color.
WiredHome 19:3f82c1161fd2 1248 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1249 ///
WiredHome 19:3f82c1161fd2 1250 virtual RetCode_t background(unsigned char r, unsigned char g, unsigned char b);
WiredHome 19:3f82c1161fd2 1251
WiredHome 19:3f82c1161fd2 1252 /// Set the foreground color.
WiredHome 19:3f82c1161fd2 1253 ///
WiredHome 72:ecffe56af969 1254 /// @param[in] color is expressed in 16-bit format.
WiredHome 19:3f82c1161fd2 1255 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1256 ///
WiredHome 19:3f82c1161fd2 1257 virtual RetCode_t foreground(color_t color);
WiredHome 19:3f82c1161fd2 1258
WiredHome 19:3f82c1161fd2 1259 /// Set the foreground color.
WiredHome 19:3f82c1161fd2 1260 ///
WiredHome 72:ecffe56af969 1261 /// @param[in] r is the red element of the color.
WiredHome 72:ecffe56af969 1262 /// @param[in] g is the green element of the color.
WiredHome 72:ecffe56af969 1263 /// @param[in] b is the blue element of the color.
WiredHome 19:3f82c1161fd2 1264 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1265 ///
WiredHome 37:f19b7e7449dc 1266 virtual RetCode_t foreground(unsigned char r, unsigned char g, unsigned char b);
WiredHome 19:3f82c1161fd2 1267
WiredHome 19:3f82c1161fd2 1268 /// Get the current foreground color value.
WiredHome 19:3f82c1161fd2 1269 ///
WiredHome 19:3f82c1161fd2 1270 /// @returns the current foreground color.
WiredHome 19:3f82c1161fd2 1271 ///
WiredHome 37:f19b7e7449dc 1272 color_t GetForeColor(void);
WiredHome 87:ee2240581aa7 1273
WiredHome 87:ee2240581aa7 1274 /// Draw a pixel in the specified color.
WiredHome 87:ee2240581aa7 1275 ///
WiredHome 87:ee2240581aa7 1276 /// @note Unlike many other operations, this does not
WiredHome 87:ee2240581aa7 1277 /// set the forecolor!
WiredHome 87:ee2240581aa7 1278 ///
WiredHome 87:ee2240581aa7 1279 /// @param[in] p is the point_t defining the location.
WiredHome 87:ee2240581aa7 1280 /// @returns success/failure code. @see RetCode_t.
WiredHome 87:ee2240581aa7 1281 ///
WiredHome 87:ee2240581aa7 1282 virtual RetCode_t pixel(point_t p, color_t color);
WiredHome 87:ee2240581aa7 1283
WiredHome 87:ee2240581aa7 1284 /// Draw a pixel in the current foreground color.
WiredHome 87:ee2240581aa7 1285 ///
WiredHome 87:ee2240581aa7 1286 /// @param[in] p is the point_t defining the location.
WiredHome 87:ee2240581aa7 1287 /// @returns success/failure code. @see RetCode_t.
WiredHome 87:ee2240581aa7 1288 ///
WiredHome 87:ee2240581aa7 1289 virtual RetCode_t pixel(point_t p);
WiredHome 19:3f82c1161fd2 1290
WiredHome 19:3f82c1161fd2 1291 /// Draw a pixel in the specified color.
WiredHome 19:3f82c1161fd2 1292 ///
WiredHome 41:2956a0a221e5 1293 /// @note Unlike many other operations, this does not
WiredHome 41:2956a0a221e5 1294 /// set the forecolor!
WiredHome 19:3f82c1161fd2 1295 ///
WiredHome 72:ecffe56af969 1296 /// @param[in] x is the horizontal offset to this pixel.
WiredHome 72:ecffe56af969 1297 /// @param[in] y is the vertical offset to this pixel.
WiredHome 72:ecffe56af969 1298 /// @param[in] color defines the color for the pixel.
WiredHome 19:3f82c1161fd2 1299 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1300 ///
WiredHome 37:f19b7e7449dc 1301 virtual RetCode_t pixel(loc_t x, loc_t y, color_t color);
WiredHome 19:3f82c1161fd2 1302
WiredHome 19:3f82c1161fd2 1303 /// Draw a pixel in the current foreground color.
WiredHome 19:3f82c1161fd2 1304 ///
WiredHome 72:ecffe56af969 1305 /// @param[in] x is the horizontal offset to this pixel.
WiredHome 72:ecffe56af969 1306 /// @param[in] y is the veritical offset to this pixel.
WiredHome 19:3f82c1161fd2 1307 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1308 ///
WiredHome 37:f19b7e7449dc 1309 virtual RetCode_t pixel(loc_t x, loc_t y);
WiredHome 19:3f82c1161fd2 1310
WiredHome 41:2956a0a221e5 1311 /// Get a pixel from the display.
WiredHome 41:2956a0a221e5 1312 ///
WiredHome 72:ecffe56af969 1313 /// @param[in] x is the horizontal offset to this pixel.
WiredHome 72:ecffe56af969 1314 /// @param[in] y is the vertical offset to this pixel.
WiredHome 41:2956a0a221e5 1315 /// @returns the pixel. see @color_t
WiredHome 41:2956a0a221e5 1316 ///
WiredHome 41:2956a0a221e5 1317 virtual color_t getPixel(loc_t x, loc_t y);
WiredHome 41:2956a0a221e5 1318
WiredHome 41:2956a0a221e5 1319 /// Write a stream of pixels to the display.
WiredHome 41:2956a0a221e5 1320 ///
WiredHome 72:ecffe56af969 1321 /// @param[in] p is a pointer to a color_t array to write.
WiredHome 72:ecffe56af969 1322 /// @param[in] count is the number of pixels to write.
WiredHome 72:ecffe56af969 1323 /// @param[in] x is the horizontal position on the display.
WiredHome 72:ecffe56af969 1324 /// @param[in] y is the vertical position on the display.
WiredHome 41:2956a0a221e5 1325 /// @returns success/failure code. @see RetCode_t.
WiredHome 41:2956a0a221e5 1326 ///
WiredHome 41:2956a0a221e5 1327 virtual RetCode_t pixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome 41:2956a0a221e5 1328
WiredHome 41:2956a0a221e5 1329 /// Get a stream of pixels from the display.
WiredHome 41:2956a0a221e5 1330 ///
WiredHome 72:ecffe56af969 1331 /// @param[in] p is a pointer to a color_t array to accept the stream.
WiredHome 72:ecffe56af969 1332 /// @param[in] count is the number of pixels to read.
WiredHome 72:ecffe56af969 1333 /// @param[in] x is the horizontal offset to this pixel.
WiredHome 72:ecffe56af969 1334 /// @param[in] y is the vertical offset to this pixel.
WiredHome 41:2956a0a221e5 1335 /// @returns success/failure code. @see RetCode_t.
WiredHome 41:2956a0a221e5 1336 ///
WiredHome 41:2956a0a221e5 1337 virtual RetCode_t getPixelStream(color_t * p, uint32_t count, loc_t x, loc_t y);
WiredHome 41:2956a0a221e5 1338
WiredHome 19:3f82c1161fd2 1339 /// Draw a line in the specified color
WiredHome 19:3f82c1161fd2 1340 ///
WiredHome 19:3f82c1161fd2 1341 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1342 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1343 ///
WiredHome 83:7bad0068cca0 1344 /// @param[in] p1 is the point to start the line.
WiredHome 83:7bad0068cca0 1345 /// @param[in] p2 is the point to end the line.
WiredHome 83:7bad0068cca0 1346 /// @param[in] color defines the foreground color.
WiredHome 83:7bad0068cca0 1347 /// @returns success/failure code. @see RetCode_t.
WiredHome 83:7bad0068cca0 1348 ///
WiredHome 83:7bad0068cca0 1349 RetCode_t line(point_t p1, point_t p2, color_t color);
WiredHome 83:7bad0068cca0 1350
WiredHome 83:7bad0068cca0 1351 /// Draw a line
WiredHome 83:7bad0068cca0 1352 ///
WiredHome 83:7bad0068cca0 1353 /// Draws a line using the foreground color setting.
WiredHome 83:7bad0068cca0 1354 ///
WiredHome 83:7bad0068cca0 1355 /// @param[in] p1 is the point to start the line.
WiredHome 83:7bad0068cca0 1356 /// @param[in] p2 is the point to end the line.
WiredHome 83:7bad0068cca0 1357 /// @returns success/failure code. @see RetCode_t.
WiredHome 83:7bad0068cca0 1358 ///
WiredHome 83:7bad0068cca0 1359 RetCode_t line(point_t p1, point_t p2);
WiredHome 83:7bad0068cca0 1360
WiredHome 83:7bad0068cca0 1361 /// Draw a line in the specified color
WiredHome 83:7bad0068cca0 1362 ///
WiredHome 83:7bad0068cca0 1363 /// @note As a side effect, this changes the current
WiredHome 83:7bad0068cca0 1364 /// foreground color for subsequent operations.
WiredHome 83:7bad0068cca0 1365 ///
WiredHome 72:ecffe56af969 1366 /// @param[in] x1 is the horizontal start of the line.
WiredHome 72:ecffe56af969 1367 /// @param[in] y1 is the vertical start of the line.
WiredHome 72:ecffe56af969 1368 /// @param[in] x2 is the horizontal end of the line.
WiredHome 72:ecffe56af969 1369 /// @param[in] y2 is the vertical end of the line.
WiredHome 72:ecffe56af969 1370 /// @param[in] color defines the foreground color.
WiredHome 19:3f82c1161fd2 1371 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1372 ///
WiredHome 56:7a85d226ad0d 1373 RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2, color_t color);
WiredHome 19:3f82c1161fd2 1374
WiredHome 19:3f82c1161fd2 1375 /// Draw a line
WiredHome 19:3f82c1161fd2 1376 ///
WiredHome 19:3f82c1161fd2 1377 /// Draws a line using the foreground color setting.
WiredHome 19:3f82c1161fd2 1378 ///
WiredHome 72:ecffe56af969 1379 /// @param[in] x1 is the horizontal start of the line.
WiredHome 72:ecffe56af969 1380 /// @param[in] y1 is the vertical start of the line.
WiredHome 72:ecffe56af969 1381 /// @param[in] x2 is the horizontal end of the line.
WiredHome 72:ecffe56af969 1382 /// @param[in] y2 is the vertical end of the line.
WiredHome 19:3f82c1161fd2 1383 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1384 ///
WiredHome 37:f19b7e7449dc 1385 RetCode_t line(loc_t x1, loc_t y1, loc_t x2, loc_t y2);
WiredHome 19:3f82c1161fd2 1386
WiredHome 19:3f82c1161fd2 1387 /// Draw a rectangle in the specified color
WiredHome 19:3f82c1161fd2 1388 ///
WiredHome 19:3f82c1161fd2 1389 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1390 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1391 ///
WiredHome 81:01da2e34283d 1392 /// @param[in] rect defines the rectangle.
WiredHome 81:01da2e34283d 1393 /// @param[in] color defines the foreground color.
WiredHome 81:01da2e34283d 1394 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 81:01da2e34283d 1395 /// @returns success/failure code. @see RetCode_t.
WiredHome 81:01da2e34283d 1396 ///
WiredHome 82:f7d300f26540 1397 RetCode_t rect(rect_t rect, color_t color, fill_t fillit = NOFILL);
WiredHome 81:01da2e34283d 1398
WiredHome 81:01da2e34283d 1399 /// Draw a filled rectangle in the specified color
WiredHome 81:01da2e34283d 1400 ///
WiredHome 81:01da2e34283d 1401 /// @note As a side effect, this changes the current
WiredHome 81:01da2e34283d 1402 /// foreground color for subsequent operations.
WiredHome 81:01da2e34283d 1403 ///
WiredHome 81:01da2e34283d 1404 /// @param[in] rect defines the rectangle.
WiredHome 81:01da2e34283d 1405 /// @param[in] color defines the foreground color.
WiredHome 81:01da2e34283d 1406 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 81:01da2e34283d 1407 /// @returns success/failure code. @see RetCode_t.
WiredHome 81:01da2e34283d 1408 ///
WiredHome 81:01da2e34283d 1409 RetCode_t fillrect(rect_t rect, color_t color, fill_t fillit = FILL);
WiredHome 81:01da2e34283d 1410
WiredHome 81:01da2e34283d 1411 /// Draw a rectangle in the specified color
WiredHome 81:01da2e34283d 1412 ///
WiredHome 81:01da2e34283d 1413 /// @note As a side effect, this changes the current
WiredHome 81:01da2e34283d 1414 /// foreground color for subsequent operations.
WiredHome 81:01da2e34283d 1415 ///
WiredHome 72:ecffe56af969 1416 /// @param[in] x1 is the horizontal start of the line.
WiredHome 72:ecffe56af969 1417 /// @param[in] y1 is the vertical start of the line.
WiredHome 72:ecffe56af969 1418 /// @param[in] x2 is the horizontal end of the line.
WiredHome 72:ecffe56af969 1419 /// @param[in] y2 is the vertical end of the line.
WiredHome 72:ecffe56af969 1420 /// @param[in] color defines the foreground color.
WiredHome 81:01da2e34283d 1421 /// @param[in] fillit is optional to FILL the rectangle. default is FILL.
WiredHome 19:3f82c1161fd2 1422 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1423 ///
WiredHome 37:f19b7e7449dc 1424 RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 19:3f82c1161fd2 1425 color_t color, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1426
WiredHome 19:3f82c1161fd2 1427 /// Draw a filled rectangle in the specified color
WiredHome 19:3f82c1161fd2 1428 ///
WiredHome 19:3f82c1161fd2 1429 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1430 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1431 ///
WiredHome 72:ecffe56af969 1432 /// @param[in] x1 is the horizontal start of the line.
WiredHome 72:ecffe56af969 1433 /// @param[in] y1 is the vertical start of the line.
WiredHome 72:ecffe56af969 1434 /// @param[in] x2 is the horizontal end of the line.
WiredHome 72:ecffe56af969 1435 /// @param[in] y2 is the vertical end of the line.
WiredHome 72:ecffe56af969 1436 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1437 /// @param[in] fillit is optional to NOFILL the rectangle. default is FILL.
WiredHome 19:3f82c1161fd2 1438 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1439 ///
WiredHome 37:f19b7e7449dc 1440 virtual RetCode_t fillrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 19:3f82c1161fd2 1441 color_t color, fill_t fillit = FILL);
WiredHome 19:3f82c1161fd2 1442
WiredHome 19:3f82c1161fd2 1443 /// Draw a rectangle
WiredHome 19:3f82c1161fd2 1444 ///
WiredHome 19:3f82c1161fd2 1445 /// Draws a rectangle using the foreground color setting.
WiredHome 19:3f82c1161fd2 1446 ///
WiredHome 72:ecffe56af969 1447 /// @param[in] x1 is the horizontal start of the line.
WiredHome 72:ecffe56af969 1448 /// @param[in] y1 is the vertical start of the line.
WiredHome 72:ecffe56af969 1449 /// @param[in] x2 is the horizontal end of the line.
WiredHome 72:ecffe56af969 1450 /// @param[in] y2 is the vertical end of the line.
WiredHome 72:ecffe56af969 1451 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1452 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1453 ///
WiredHome 37:f19b7e7449dc 1454 RetCode_t rect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 19:3f82c1161fd2 1455 fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1456
WiredHome 19:3f82c1161fd2 1457 /// Draw a filled rectangle with rounded corners using the specified color.
WiredHome 19:3f82c1161fd2 1458 ///
WiredHome 21:3c1efb192927 1459 /// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome 21:3c1efb192927 1460 /// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome 21:3c1efb192927 1461 /// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome 21:3c1efb192927 1462 /// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome 21:3c1efb192927 1463 ///
WiredHome 19:3f82c1161fd2 1464 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1465 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1466 ///
WiredHome 72:ecffe56af969 1467 /// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome 72:ecffe56af969 1468 /// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome 72:ecffe56af969 1469 /// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome 72:ecffe56af969 1470 /// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome 72:ecffe56af969 1471 /// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1472 /// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1473 /// is returned.
WiredHome 72:ecffe56af969 1474 /// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1475 /// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1476 /// is returned.
WiredHome 72:ecffe56af969 1477 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1478 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1479 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1480 ///
WiredHome 37:f19b7e7449dc 1481 RetCode_t fillroundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1482 dim_t radius1, dim_t radius2, color_t color, fill_t fillit = FILL);
WiredHome 19:3f82c1161fd2 1483
WiredHome 19:3f82c1161fd2 1484 /// Draw a rectangle with rounded corners using the specified color.
WiredHome 19:3f82c1161fd2 1485 ///
WiredHome 21:3c1efb192927 1486 /// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome 21:3c1efb192927 1487 /// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome 21:3c1efb192927 1488 /// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome 21:3c1efb192927 1489 /// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome 21:3c1efb192927 1490 ///
WiredHome 19:3f82c1161fd2 1491 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1492 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1493 ///
WiredHome 72:ecffe56af969 1494 /// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome 72:ecffe56af969 1495 /// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome 72:ecffe56af969 1496 /// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome 72:ecffe56af969 1497 /// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome 72:ecffe56af969 1498 /// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1499 /// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1500 /// is returned.
WiredHome 72:ecffe56af969 1501 /// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1502 /// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1503 /// is returned.
WiredHome 72:ecffe56af969 1504 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1505 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1506 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1507 ///
WiredHome 37:f19b7e7449dc 1508 RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1509 dim_t radius1, dim_t radius2, color_t color, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1510
WiredHome 19:3f82c1161fd2 1511 /// Draw a rectangle with rounded corners.
WiredHome 19:3f82c1161fd2 1512 ///
WiredHome 21:3c1efb192927 1513 /// This draws a rounded rectangle. A numbers of checks are made on the values,
WiredHome 21:3c1efb192927 1514 /// and it could reduce this to drawing a line (if either x1 == x2, or y1 == y2),
WiredHome 21:3c1efb192927 1515 /// or a single point (x1 == x2 && y1 == y2). If the radius parameters are
WiredHome 21:3c1efb192927 1516 /// > 1/2 the length of that side (width or height), an error value is returned.
WiredHome 19:3f82c1161fd2 1517 ///
WiredHome 72:ecffe56af969 1518 /// @param[in] x1 is the horizontal start of the line and must be <= x2.
WiredHome 72:ecffe56af969 1519 /// @param[in] y1 is the vertical start of the line and must be <= y2.
WiredHome 72:ecffe56af969 1520 /// @param[in] x2 is the horizontal end of the line and must be >= x1.
WiredHome 72:ecffe56af969 1521 /// @param[in] y2 is the vertical end of the line and must be >= y1.
WiredHome 72:ecffe56af969 1522 /// @param[in] radius1 defines the horizontal radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1523 /// that this value < 1/2 the width of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1524 /// is returned.
WiredHome 72:ecffe56af969 1525 /// @param[in] radius2 defines the vertical radius of the curved corner. Take care
WiredHome 21:3c1efb192927 1526 /// that this value < 1/2 the height of the rectangle, or bad_parameter
WiredHome 21:3c1efb192927 1527 /// is returned.
WiredHome 72:ecffe56af969 1528 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1529 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1530 ///
WiredHome 37:f19b7e7449dc 1531 RetCode_t roundrect(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1532 dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1533
WiredHome 19:3f82c1161fd2 1534 /// Draw a triangle in the specified color.
WiredHome 19:3f82c1161fd2 1535 ///
WiredHome 19:3f82c1161fd2 1536 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1537 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1538 ///
WiredHome 72:ecffe56af969 1539 /// @param[in] x1 is the horizontal for point 1.
WiredHome 72:ecffe56af969 1540 /// @param[in] y1 is the vertical for point 1.
WiredHome 72:ecffe56af969 1541 /// @param[in] x2 is the horizontal for point 2.
WiredHome 72:ecffe56af969 1542 /// @param[in] y2 is the vertical for point 2.
WiredHome 72:ecffe56af969 1543 /// @param[in] x3 is the horizontal for point 3.
WiredHome 72:ecffe56af969 1544 /// @param[in] y3 is the vertical for point 3.
WiredHome 72:ecffe56af969 1545 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1546 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1547 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1548 ///
WiredHome 37:f19b7e7449dc 1549 RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1550 loc_t x3, loc_t y3, color_t color, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1551
WiredHome 19:3f82c1161fd2 1552 /// Draw a filled triangle in the specified color.
WiredHome 19:3f82c1161fd2 1553 ///
WiredHome 19:3f82c1161fd2 1554 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1555 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1556 ///
WiredHome 72:ecffe56af969 1557 /// @param[in] x1 is the horizontal for point 1.
WiredHome 72:ecffe56af969 1558 /// @param[in] y1 is the vertical for point 1.
WiredHome 72:ecffe56af969 1559 /// @param[in] x2 is the horizontal for point 2.
WiredHome 72:ecffe56af969 1560 /// @param[in] y2 is the vertical for point 2.
WiredHome 72:ecffe56af969 1561 /// @param[in] x3 is the horizontal for point 3.
WiredHome 72:ecffe56af969 1562 /// @param[in] y3 is the vertical for point 3.
WiredHome 72:ecffe56af969 1563 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1564 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1565 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1566 ///
WiredHome 37:f19b7e7449dc 1567 RetCode_t filltriangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1568 loc_t x3, loc_t y3, color_t color, fill_t fillit = FILL);
WiredHome 19:3f82c1161fd2 1569
WiredHome 19:3f82c1161fd2 1570 /// Draw a triangle
WiredHome 19:3f82c1161fd2 1571 ///
WiredHome 19:3f82c1161fd2 1572 /// Draws a triangle using the foreground color setting.
WiredHome 19:3f82c1161fd2 1573 ///
WiredHome 72:ecffe56af969 1574 /// @param[in] x1 is the horizontal for point 1.
WiredHome 72:ecffe56af969 1575 /// @param[in] y1 is the vertical for point 1.
WiredHome 72:ecffe56af969 1576 /// @param[in] x2 is the horizontal for point 2.
WiredHome 72:ecffe56af969 1577 /// @param[in] y2 is the vertical for point 2.
WiredHome 72:ecffe56af969 1578 /// @param[in] x3 is the horizontal for point 3.
WiredHome 72:ecffe56af969 1579 /// @param[in] y3 is the vertical for point 3.
WiredHome 72:ecffe56af969 1580 /// @param[in] fillit is optional to FILL the rectangle. default is NOFILL.
WiredHome 19:3f82c1161fd2 1581 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1582 ///
WiredHome 37:f19b7e7449dc 1583 RetCode_t triangle(loc_t x1, loc_t y1, loc_t x2, loc_t y2,
WiredHome 37:f19b7e7449dc 1584 loc_t x3, loc_t y3, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1585
WiredHome 83:7bad0068cca0 1586
WiredHome 83:7bad0068cca0 1587 /// Draw a circle using the specified color.
WiredHome 83:7bad0068cca0 1588 ///
WiredHome 83:7bad0068cca0 1589 /// @note As a side effect, this changes the current
WiredHome 83:7bad0068cca0 1590 /// foreground color for subsequent operations.
WiredHome 83:7bad0068cca0 1591 ///
WiredHome 83:7bad0068cca0 1592 /// @param[in] p defines the center of the circle.
WiredHome 83:7bad0068cca0 1593 /// @param[in] radius defines the size of the circle.
WiredHome 83:7bad0068cca0 1594 /// @param[in] color defines the foreground color.
WiredHome 83:7bad0068cca0 1595 /// @returns success/failure code. @see RetCode_t.
WiredHome 83:7bad0068cca0 1596 ///
WiredHome 83:7bad0068cca0 1597 RetCode_t circle(point_t p, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome 83:7bad0068cca0 1598
WiredHome 83:7bad0068cca0 1599 /// Draw a filled circle using the specified color.
WiredHome 83:7bad0068cca0 1600 ///
WiredHome 83:7bad0068cca0 1601 /// @note As a side effect, this changes the current
WiredHome 83:7bad0068cca0 1602 /// foreground color for subsequent operations.
WiredHome 83:7bad0068cca0 1603 ///
WiredHome 83:7bad0068cca0 1604 /// @param[in] p defines the center of the circle.
WiredHome 83:7bad0068cca0 1605 /// @param[in] radius defines the size of the circle.
WiredHome 83:7bad0068cca0 1606 /// @param[in] color defines the foreground color.
WiredHome 83:7bad0068cca0 1607 /// @returns success/failure code. @see RetCode_t.
WiredHome 83:7bad0068cca0 1608 ///
WiredHome 83:7bad0068cca0 1609 RetCode_t fillcircle(point_t p, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome 83:7bad0068cca0 1610
WiredHome 83:7bad0068cca0 1611 /// Draw a circle.
WiredHome 83:7bad0068cca0 1612 ///
WiredHome 83:7bad0068cca0 1613 /// Draws a circle using the foreground color setting.
WiredHome 83:7bad0068cca0 1614 ///
WiredHome 83:7bad0068cca0 1615 /// @param[in] p defines the center of the circle.
WiredHome 83:7bad0068cca0 1616 /// @param[in] radius defines the size of the circle.
WiredHome 83:7bad0068cca0 1617 /// @returns success/failure code. @see RetCode_t.
WiredHome 83:7bad0068cca0 1618 ///
WiredHome 83:7bad0068cca0 1619 RetCode_t circle(point_t p, dim_t radius, fill_t fillit = NOFILL);
WiredHome 83:7bad0068cca0 1620
WiredHome 19:3f82c1161fd2 1621 /// Draw a circle using the specified color.
WiredHome 19:3f82c1161fd2 1622 ///
WiredHome 19:3f82c1161fd2 1623 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1624 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1625 ///
WiredHome 72:ecffe56af969 1626 /// @param[in] x is the horizontal center of the circle.
WiredHome 72:ecffe56af969 1627 /// @param[in] y is the vertical center of the circle.
WiredHome 72:ecffe56af969 1628 /// @param[in] radius defines the size of the circle.
WiredHome 72:ecffe56af969 1629 /// @param[in] color defines the foreground color.
WiredHome 19:3f82c1161fd2 1630 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1631 ///
WiredHome 37:f19b7e7449dc 1632 RetCode_t circle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1633
WiredHome 19:3f82c1161fd2 1634 /// Draw a filled circle using the specified color.
WiredHome 19:3f82c1161fd2 1635 ///
WiredHome 19:3f82c1161fd2 1636 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1637 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1638 ///
WiredHome 72:ecffe56af969 1639 /// @param[in] x is the horizontal center of the circle.
WiredHome 72:ecffe56af969 1640 /// @param[in] y is the vertical center of the circle.
WiredHome 72:ecffe56af969 1641 /// @param[in] radius defines the size of the circle.
WiredHome 72:ecffe56af969 1642 /// @param[in] color defines the foreground color.
WiredHome 19:3f82c1161fd2 1643 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1644 ///
WiredHome 37:f19b7e7449dc 1645 RetCode_t fillcircle(loc_t x, loc_t y, dim_t radius, color_t color, fill_t fillit = FILL);
WiredHome 19:3f82c1161fd2 1646
WiredHome 19:3f82c1161fd2 1647 /// Draw a circle.
WiredHome 19:3f82c1161fd2 1648 ///
WiredHome 19:3f82c1161fd2 1649 /// Draws a circle using the foreground color setting.
WiredHome 19:3f82c1161fd2 1650 ///
WiredHome 72:ecffe56af969 1651 /// @param[in] x is the horizontal center of the circle.
WiredHome 72:ecffe56af969 1652 /// @param[in] y is the vertical center of the circle.
WiredHome 72:ecffe56af969 1653 /// @param[in] radius defines the size of the circle.
WiredHome 19:3f82c1161fd2 1654 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1655 ///
WiredHome 37:f19b7e7449dc 1656 RetCode_t circle(loc_t x, loc_t y, dim_t radius, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1657
WiredHome 19:3f82c1161fd2 1658 /// Draw an Ellipse using the specified color
WiredHome 19:3f82c1161fd2 1659 ///
WiredHome 19:3f82c1161fd2 1660 /// @note As a side effect, this changes the current
WiredHome 19:3f82c1161fd2 1661 /// foreground color for subsequent operations.
WiredHome 19:3f82c1161fd2 1662 ///
WiredHome 72:ecffe56af969 1663 /// @param[in] x is the horizontal center of the ellipse.
WiredHome 72:ecffe56af969 1664 /// @param[in] y is the vertical center of the ellipse.
WiredHome 72:ecffe56af969 1665 /// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome 72:ecffe56af969 1666 /// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome 72:ecffe56af969 1667 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1668 /// @param[in] fillit defines whether the circle is filled or not.
WiredHome 19:3f82c1161fd2 1669 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1670 ///
WiredHome 37:f19b7e7449dc 1671 RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome 19:3f82c1161fd2 1672 color_t color, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1673
WiredHome 25:9556a3a9b7cc 1674 /// Draw a filled Ellipse using the specified color
WiredHome 25:9556a3a9b7cc 1675 ///
WiredHome 25:9556a3a9b7cc 1676 /// @note As a side effect, this changes the current
WiredHome 25:9556a3a9b7cc 1677 /// foreground color for subsequent operations.
WiredHome 25:9556a3a9b7cc 1678 ///
WiredHome 72:ecffe56af969 1679 /// @param[in] x is the horizontal center of the ellipse.
WiredHome 72:ecffe56af969 1680 /// @param[in] y is the vertical center of the ellipse.
WiredHome 72:ecffe56af969 1681 /// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome 72:ecffe56af969 1682 /// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome 72:ecffe56af969 1683 /// @param[in] color defines the foreground color.
WiredHome 72:ecffe56af969 1684 /// @param[in] fillit defines whether the circle is filled or not.
WiredHome 25:9556a3a9b7cc 1685 /// @returns success/failure code. @see RetCode_t.
WiredHome 25:9556a3a9b7cc 1686 ///
WiredHome 37:f19b7e7449dc 1687 RetCode_t fillellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2,
WiredHome 25:9556a3a9b7cc 1688 color_t color, fill_t fillit = FILL);
WiredHome 25:9556a3a9b7cc 1689
WiredHome 19:3f82c1161fd2 1690 /// Draw an Ellipse
WiredHome 19:3f82c1161fd2 1691 ///
WiredHome 19:3f82c1161fd2 1692 /// Draws it using the foreground color setting.
WiredHome 19:3f82c1161fd2 1693 ///
WiredHome 72:ecffe56af969 1694 /// @param[in] x is the horizontal center of the ellipse.
WiredHome 72:ecffe56af969 1695 /// @param[in] y is the vertical center of the ellipse.
WiredHome 72:ecffe56af969 1696 /// @param[in] radius1 defines the horizontal radius of the ellipse.
WiredHome 72:ecffe56af969 1697 /// @param[in] radius2 defines the vertical radius of the ellipse.
WiredHome 72:ecffe56af969 1698 /// @param[in] fillit defines whether the circle is filled or not.
WiredHome 19:3f82c1161fd2 1699 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1700 ///
WiredHome 37:f19b7e7449dc 1701 RetCode_t ellipse(loc_t x, loc_t y, dim_t radius1, dim_t radius2, fill_t fillit = NOFILL);
WiredHome 19:3f82c1161fd2 1702
WiredHome 19:3f82c1161fd2 1703 /// Control display power
WiredHome 19:3f82c1161fd2 1704 ///
WiredHome 72:ecffe56af969 1705 /// @param[in] on when set to true will turn on the display, when false it is turned off.
WiredHome 19:3f82c1161fd2 1706 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1707 ///
WiredHome 19:3f82c1161fd2 1708 RetCode_t Power(bool on);
WiredHome 19:3f82c1161fd2 1709
WiredHome 19:3f82c1161fd2 1710 /// Reset the display controller via the Software Reset interface.
WiredHome 19:3f82c1161fd2 1711 ///
WiredHome 19:3f82c1161fd2 1712 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1713 ///
WiredHome 19:3f82c1161fd2 1714 RetCode_t Reset(void);
WiredHome 19:3f82c1161fd2 1715
WiredHome 19:3f82c1161fd2 1716 /// Set backlight brightness.
WiredHome 19:3f82c1161fd2 1717 ///
WiredHome 19:3f82c1161fd2 1718 /// When the built-in PWM is used to control the backlight, this
WiredHome 19:3f82c1161fd2 1719 /// API can be used to set the brightness.
WiredHome 19:3f82c1161fd2 1720 ///
WiredHome 72:ecffe56af969 1721 /// @param[in] brightness ranges from 0 (off) to 255 (full on)
WiredHome 19:3f82c1161fd2 1722 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1723 ///
WiredHome 19:3f82c1161fd2 1724 RetCode_t Backlight_u8(unsigned char brightness);
WiredHome 19:3f82c1161fd2 1725
WiredHome 86:e86b355940f4 1726 /// Get backlight brightness.
WiredHome 86:e86b355940f4 1727 ///
WiredHome 86:e86b355940f4 1728 /// @returns backlight setting from 0 (off) to 255 (full on).
WiredHome 86:e86b355940f4 1729 ///
WiredHome 86:e86b355940f4 1730 uint8_t GetBacklight_u8(void);
WiredHome 86:e86b355940f4 1731
WiredHome 19:3f82c1161fd2 1732 /// Set backlight brightness.
WiredHome 19:3f82c1161fd2 1733 ///
WiredHome 19:3f82c1161fd2 1734 /// When the built-in PWM is used to control the backlight, this
WiredHome 19:3f82c1161fd2 1735 /// API can be used to set the brightness.
WiredHome 19:3f82c1161fd2 1736 ///
WiredHome 72:ecffe56af969 1737 /// @param[in] brightness ranges from 0.0 (off) to 1.0 (full on)
WiredHome 19:3f82c1161fd2 1738 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 1739 ///
WiredHome 19:3f82c1161fd2 1740 RetCode_t Backlight(float brightness);
WiredHome 19:3f82c1161fd2 1741
WiredHome 86:e86b355940f4 1742 /// Get backlight brightness.
WiredHome 86:e86b355940f4 1743 ///
WiredHome 86:e86b355940f4 1744 /// @returns backlight setting from 0 (off) to 1.0 (full on).
WiredHome 86:e86b355940f4 1745 ///
WiredHome 86:e86b355940f4 1746 float GetBacklight(void);
WiredHome 86:e86b355940f4 1747
WiredHome 32:0e4f2ae512e2 1748 /// Select a bitmap font (provided by the user) for all subsequent text.
WiredHome 19:3f82c1161fd2 1749 ///
WiredHome 98:ecebed9b80b2 1750 /// @caution This function is deprecated. @see SelectUserFont.
WiredHome 98:ecebed9b80b2 1751 ///
WiredHome 19:3f82c1161fd2 1752 /// @note Tool to create the fonts is accessible from its creator
WiredHome 19:3f82c1161fd2 1753 /// available at http://www.mikroe.com.
WiredHome 19:3f82c1161fd2 1754 /// Change the data to an array of type char[].
WiredHome 19:3f82c1161fd2 1755 ///
WiredHome 98:ecebed9b80b2 1756 /// This special font array is modified from the mikroe tool output,
WiredHome 98:ecebed9b80b2 1757 /// to include a special 4-byte header, which has this data:
WiredHome 19:3f82c1161fd2 1758 /// - the number of bytes per char
WiredHome 19:3f82c1161fd2 1759 /// - the vertical size in pixels for each character
WiredHome 19:3f82c1161fd2 1760 /// - the horizontal size in pixels for each character
WiredHome 19:3f82c1161fd2 1761 /// - the number of bytes per vertical line (width of the array)
WiredHome 98:ecebed9b80b2 1762 /// - following this special header is the normal data stream.
WiredHome 98:ecebed9b80b2 1763 ///
WiredHome 98:ecebed9b80b2 1764 /// @param[in] font is a pointer to a specially formed font array.
WiredHome 19:3f82c1161fd2 1765 /// @returns error code.
WiredHome 19:3f82c1161fd2 1766 ///
WiredHome 30:e0f2da88bdf6 1767 virtual RetCode_t set_font(const unsigned char * font = NULL);
WiredHome 98:ecebed9b80b2 1768
WiredHome 98:ecebed9b80b2 1769
WiredHome 98:ecebed9b80b2 1770 /// Select a User Font for all subsequent text.
WiredHome 98:ecebed9b80b2 1771 ///
WiredHome 98:ecebed9b80b2 1772 /// @note This function is replaces the obsolete function @see set_font.
WiredHome 98:ecebed9b80b2 1773 ///
WiredHome 98:ecebed9b80b2 1774 /// @note Tool to create the fonts is accessible from its creator
WiredHome 98:ecebed9b80b2 1775 /// available at http://www.mikroe.com.
WiredHome 98:ecebed9b80b2 1776 /// For version 1.2.0.0, choose the "Export for TFT and new GLCD"
WiredHome 98:ecebed9b80b2 1777 /// format.
WiredHome 98:ecebed9b80b2 1778 ///
WiredHome 98:ecebed9b80b2 1779 /// @param[in] font is a pointer to a specially formed font resource.
WiredHome 98:ecebed9b80b2 1780 /// @returns error code.
WiredHome 98:ecebed9b80b2 1781 ///
WiredHome 98:ecebed9b80b2 1782 virtual RetCode_t SelectUserFont(const uint8_t * font = NULL);
WiredHome 98:ecebed9b80b2 1783
WiredHome 98:ecebed9b80b2 1784 typedef uint8_t byte;
WiredHome 19:3f82c1161fd2 1785
WiredHome 19:3f82c1161fd2 1786 /// Get the RGB value for a DOS color.
WiredHome 19:3f82c1161fd2 1787 ///
WiredHome 72:ecffe56af969 1788 /// @param[in] i is the color, in the range 0 to 15;
WiredHome 19:3f82c1161fd2 1789 /// @returns the RGB color of the selected index, or 0
WiredHome 19:3f82c1161fd2 1790 /// if the index is out of bounds.
WiredHome 19:3f82c1161fd2 1791 ///
WiredHome 19:3f82c1161fd2 1792 color_t DOSColor(int i);
WiredHome 19:3f82c1161fd2 1793
WiredHome 19:3f82c1161fd2 1794 /// Get the color name (string) for a DOS color.
WiredHome 19:3f82c1161fd2 1795 ///
WiredHome 72:ecffe56af969 1796 /// @param[in] i is the color, in the range 0 to 15;
WiredHome 19:3f82c1161fd2 1797 /// @returns a pointer to a string with the color name,
WiredHome 19:3f82c1161fd2 1798 /// or NULL if the index is out of bounds.
WiredHome 19:3f82c1161fd2 1799 ///
WiredHome 19:3f82c1161fd2 1800 const char * DOSColorNames(int i);
WiredHome 19:3f82c1161fd2 1801
WiredHome 55:dfbabef7003e 1802 /// Advanced method indicating the start of a graphics stream.
WiredHome 55:dfbabef7003e 1803 ///
WiredHome 55:dfbabef7003e 1804 /// This is called prior to a stream of pixel data being sent.
WiredHome 55:dfbabef7003e 1805 /// This may cause register configuration changes in the derived
WiredHome 55:dfbabef7003e 1806 /// class in order to prepare the hardware to accept the streaming
WiredHome 55:dfbabef7003e 1807 /// data.
WiredHome 55:dfbabef7003e 1808 ///
WiredHome 55:dfbabef7003e 1809 /// Following this command, a series of @see _putp() commands can
WiredHome 55:dfbabef7003e 1810 /// be used to send individual pixels to the screen.
WiredHome 55:dfbabef7003e 1811 ///
WiredHome 55:dfbabef7003e 1812 /// To conclude the graphics stream, @see _EndGraphicsStream should
WiredHome 55:dfbabef7003e 1813 /// be callled.
WiredHome 55:dfbabef7003e 1814 ///
WiredHome 55:dfbabef7003e 1815 /// @returns error code.
WiredHome 55:dfbabef7003e 1816 ///
WiredHome 55:dfbabef7003e 1817 virtual RetCode_t _StartGraphicsStream(void);
WiredHome 55:dfbabef7003e 1818
WiredHome 55:dfbabef7003e 1819 /// Advanced method to put a single color pixel to the screen.
WiredHome 55:dfbabef7003e 1820 ///
WiredHome 55:dfbabef7003e 1821 /// This method may be called as many times as necessary after
WiredHome 55:dfbabef7003e 1822 /// @see _StartGraphicsStream() is called, and it should be followed
WiredHome 55:dfbabef7003e 1823 /// by _EndGraphicsStream.
WiredHome 55:dfbabef7003e 1824 ///
WiredHome 72:ecffe56af969 1825 /// @param[in] pixel is a color value to be put on the screen.
WiredHome 55:dfbabef7003e 1826 /// @returns error code.
WiredHome 55:dfbabef7003e 1827 ///
WiredHome 55:dfbabef7003e 1828 virtual RetCode_t _putp(color_t pixel);
WiredHome 55:dfbabef7003e 1829
WiredHome 55:dfbabef7003e 1830 /// Advanced method indicating the end of a graphics stream.
WiredHome 55:dfbabef7003e 1831 ///
WiredHome 55:dfbabef7003e 1832 /// This is called to conclude a stream of pixel data that was sent.
WiredHome 55:dfbabef7003e 1833 /// This may cause register configuration changes in the derived
WiredHome 55:dfbabef7003e 1834 /// class in order to stop the hardware from accept the streaming
WiredHome 55:dfbabef7003e 1835 /// data.
WiredHome 55:dfbabef7003e 1836 ///
WiredHome 55:dfbabef7003e 1837 /// @returns error code.
WiredHome 55:dfbabef7003e 1838 ///
WiredHome 55:dfbabef7003e 1839 virtual RetCode_t _EndGraphicsStream(void);
WiredHome 19:3f82c1161fd2 1840
WiredHome 57:bd53a9e165a1 1841 /// Set the SPI port frequency (in Hz).
WiredHome 57:bd53a9e165a1 1842 ///
WiredHome 66:468a11f05580 1843 /// This uses the mbed SPI driver, and is therefore dependent on
WiredHome 66:468a11f05580 1844 /// its capabilities. The RA8875 can accept writes via SPI faster
WiredHome 66:468a11f05580 1845 /// than a read can be performed. The frequency set by this API
WiredHome 66:468a11f05580 1846 /// is for the SPI writes. It will automatically reduce the SPI
WiredHome 66:468a11f05580 1847 /// clock rate when a read is performed, and restore it for the
WiredHome 68:ab08efabfc88 1848 /// next write. Alternately, the 2nd parameters permits setting
WiredHome 68:ab08efabfc88 1849 /// the read speed rather than letting it compute it automatically.
WiredHome 57:bd53a9e165a1 1850 ///
WiredHome 66:468a11f05580 1851 /// @note The primary effect of this is to recover more CPU cycles
WiredHome 66:468a11f05580 1852 /// for your application code. Keep in mind that when more than
WiredHome 66:468a11f05580 1853 /// one command is sent to the display controller, that it
WiredHome 66:468a11f05580 1854 /// will wait for the controller to finish the prior command.
WiredHome 66:468a11f05580 1855 /// In this case, the performance is limited by the RA8875.
WiredHome 57:bd53a9e165a1 1856 ///
WiredHome 72:ecffe56af969 1857 /// @param[in] Hz is the frequency in Hz, tested range includes the
WiredHome 66:468a11f05580 1858 /// range from 1,000,000 (1MHz) to 10,000,000 (10 MHz). Values
WiredHome 66:468a11f05580 1859 /// outside this range will be accepted, but operation may
WiredHome 76:c981284eb513 1860 /// be unreliable. This depends partially on your hardware design
WiredHome 76:c981284eb513 1861 /// and the wires connecting the display module.
WiredHome 76:c981284eb513 1862 /// The default value is 5,000,000, which should work for most
WiredHome 76:c981284eb513 1863 /// applications as a starting point.
WiredHome 72:ecffe56af969 1864 /// @param[in] Hz2 is an optional parameter and will set the read
WiredHome 68:ab08efabfc88 1865 /// speed independently of the write speed.
WiredHome 57:bd53a9e165a1 1866 /// @returns success/failure code. @see RetCode_t.
WiredHome 57:bd53a9e165a1 1867 ///
WiredHome 68:ab08efabfc88 1868 RetCode_t frequency(unsigned long Hz = RA8875_DEFAULT_SPI_FREQ, unsigned long Hz2 = 0);
WiredHome 57:bd53a9e165a1 1869
WiredHome 72:ecffe56af969 1870 /// This method captures the specified area as a 24-bit bitmap file.
WiredHome 72:ecffe56af969 1871 ///
WiredHome 72:ecffe56af969 1872 /// Even though this is a 16-bit display, the stored image is in
WiredHome 72:ecffe56af969 1873 /// 24-bit format.
WiredHome 72:ecffe56af969 1874 ///
WiredHome 73:f22a18707b5e 1875 /// This method will interrogate the current display setting and
WiredHome 73:f22a18707b5e 1876 /// create a bitmap based on those settings. For instance, if
WiredHome 73:f22a18707b5e 1877 /// only layer 1 is visible, then the bitmap is only layer 1. However,
WiredHome 73:f22a18707b5e 1878 /// if there is some other operation in effect (transparent mode).
WiredHome 73:f22a18707b5e 1879 ///
WiredHome 72:ecffe56af969 1880 /// @param[in] x is the left edge of the region to capture
WiredHome 72:ecffe56af969 1881 /// @param[in] y is the top edge of the region to capture
WiredHome 72:ecffe56af969 1882 /// @param[in] w is the width of the region to capture
WiredHome 72:ecffe56af969 1883 /// @param[in] h is the height of the region to capture.
WiredHome 72:ecffe56af969 1884 /// @param[out] Name_BMP is the filename to write the image to.
WiredHome 72:ecffe56af969 1885 /// @return success or error code.
WiredHome 72:ecffe56af969 1886 ///
WiredHome 72:ecffe56af969 1887 RetCode_t PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome 72:ecffe56af969 1888
WiredHome 96:40b74dd3695b 1889 /// This method captures the specified area as a 24-bit bitmap file
WiredHome 96:40b74dd3695b 1890 /// and delivers it to the previously attached callback.
WiredHome 96:40b74dd3695b 1891 ///
WiredHome 96:40b74dd3695b 1892 /// Even though this is a 16-bit display, the stored image is in
WiredHome 96:40b74dd3695b 1893 /// 24-bit format.
WiredHome 96:40b74dd3695b 1894 ///
WiredHome 96:40b74dd3695b 1895 /// This method will interrogate the current display setting and
WiredHome 96:40b74dd3695b 1896 /// create a bitmap based on those settings. For instance, if
WiredHome 96:40b74dd3695b 1897 /// only layer 1 is visible, then the bitmap is only layer 1. However,
WiredHome 96:40b74dd3695b 1898 /// if there is some other operation in effect (transparent mode), it
WiredHome 96:40b74dd3695b 1899 /// will return the blended image.
WiredHome 96:40b74dd3695b 1900 ///
WiredHome 96:40b74dd3695b 1901 /// @param[in] x is the left edge of the region to capture
WiredHome 96:40b74dd3695b 1902 /// @param[in] y is the top edge of the region to capture
WiredHome 96:40b74dd3695b 1903 /// @param[in] w is the width of the region to capture
WiredHome 96:40b74dd3695b 1904 /// @param[in] h is the height of the region to capture.
WiredHome 96:40b74dd3695b 1905 /// @return success or error code.
WiredHome 96:40b74dd3695b 1906 ///
WiredHome 96:40b74dd3695b 1907 RetCode_t PrintScreen(loc_t x, loc_t y, dim_t w, dim_t h);
WiredHome 96:40b74dd3695b 1908
WiredHome 96:40b74dd3695b 1909 /// PrintScreen callback registration.
WiredHome 96:40b74dd3695b 1910 ///
WiredHome 96:40b74dd3695b 1911 /// This method attaches a simple c-compatible callback of type PrintCallback_T.
WiredHome 96:40b74dd3695b 1912 /// Then, the PrintScreen(x,y,w,h) method is called. Each chunk of data in the
WiredHome 96:40b74dd3695b 1913 /// BMP file to be created is passed to this callback.
WiredHome 96:40b74dd3695b 1914 ///
WiredHome 96:40b74dd3695b 1915 /// @param callback is the callback function.
WiredHome 96:40b74dd3695b 1916 ///
WiredHome 96:40b74dd3695b 1917 void AttachPrintHandler(PrintCallback_T callback) { c_callback = callback; }
WiredHome 96:40b74dd3695b 1918
WiredHome 96:40b74dd3695b 1919 /// PrintScreen callback registration.
WiredHome 96:40b74dd3695b 1920 ///
WiredHome 96:40b74dd3695b 1921 /// This method attaches a c++ class method as a callback of type PrintCallback_T.
WiredHome 96:40b74dd3695b 1922 /// Then, the PrintScreen(x,y,w,h) method is called. Each chunk of data in the
WiredHome 96:40b74dd3695b 1923 /// BMP file to be created is passed to this callback.
WiredHome 96:40b74dd3695b 1924 ///
WiredHome 96:40b74dd3695b 1925 /// @param object is the class hosting the callback function.
WiredHome 96:40b74dd3695b 1926 /// @param callback is the callback function.
WiredHome 96:40b74dd3695b 1927 ///
WiredHome 96:40b74dd3695b 1928 template <class T>
WiredHome 96:40b74dd3695b 1929 void AttachPrintHandler(T *object, RetCode_t (T::*member)(void)) {
WiredHome 96:40b74dd3695b 1930 obj_callback = (FPointerDummy *)item;
WiredHome 96:40b74dd3695b 1931 method_callback = (uint32_t (FPointerDummy::*)(uint32_t))method;
WiredHome 96:40b74dd3695b 1932 }
WiredHome 96:40b74dd3695b 1933
WiredHome 72:ecffe56af969 1934 /// This method captures the specified area as a 24-bit bitmap file,
WiredHome 72:ecffe56af969 1935 /// including the option of layer selection.
WiredHome 72:ecffe56af969 1936 ///
WiredHome 74:686faa218914 1937 /// @caution This method is deprecated as the alternate PrintScreen API
WiredHome 74:686faa218914 1938 /// automatically examines the display layer configuration.
WiredHome 74:686faa218914 1939 /// Therefore, calls to this API will ignore the layer parameter
WiredHome 74:686faa218914 1940 /// and automatically execute the other method.
WiredHome 74:686faa218914 1941 ///
WiredHome 72:ecffe56af969 1942 /// Even though this is a 16-bit display, the stored image is in
WiredHome 72:ecffe56af969 1943 /// 24-bit format.
WiredHome 72:ecffe56af969 1944 ///
WiredHome 72:ecffe56af969 1945 /// @param[in] layer is 0 or 1 to select the layer to extract.
WiredHome 72:ecffe56af969 1946 /// @param[in] x is the left edge of the region to capture
WiredHome 72:ecffe56af969 1947 /// @param[in] y is the top edge of the region to capture
WiredHome 72:ecffe56af969 1948 /// @param[in] w is the width of the region to capture
WiredHome 72:ecffe56af969 1949 /// @param[in] h is the height of the region to capture.
WiredHome 72:ecffe56af969 1950 /// @param[out] Name_BMP is the filename to write the image to.
WiredHome 72:ecffe56af969 1951 /// @return success or error code.
WiredHome 72:ecffe56af969 1952 ///
WiredHome 72:ecffe56af969 1953 RetCode_t PrintScreen(uint16_t layer, loc_t x, loc_t y, dim_t w, dim_t h, const char *Name_BMP);
WiredHome 72:ecffe56af969 1954
WiredHome 57:bd53a9e165a1 1955
WiredHome 19:3f82c1161fd2 1956 #ifdef PERF_METRICS
WiredHome 19:3f82c1161fd2 1957 /// Clear the performance metrics to zero.
WiredHome 19:3f82c1161fd2 1958 void ClearPerformance();
WiredHome 19:3f82c1161fd2 1959
WiredHome 66:468a11f05580 1960 /// Count idle time.
WiredHome 66:468a11f05580 1961 ///
WiredHome 72:ecffe56af969 1962 /// @param[in] t is the amount of idle time to accumulate.
WiredHome 66:468a11f05580 1963 ///
WiredHome 66:468a11f05580 1964 void CountIdleTime(uint32_t t);
WiredHome 66:468a11f05580 1965
WiredHome 19:3f82c1161fd2 1966 /// Report the performance metrics for drawing functions using
WiredHome 41:2956a0a221e5 1967 /// the available serial channel.
WiredHome 41:2956a0a221e5 1968 ///
WiredHome 72:ecffe56af969 1969 /// @param[in,out] pc is the serial channel to write to.
WiredHome 41:2956a0a221e5 1970 ///
WiredHome 41:2956a0a221e5 1971 void ReportPerformance(Serial & pc);
WiredHome 19:3f82c1161fd2 1972 #endif
WiredHome 19:3f82c1161fd2 1973
hexley 54:e117ad10fba6 1974
WiredHome 19:3f82c1161fd2 1975 private:
hexley 54:e117ad10fba6 1976 /// Touch Panel register name definitions
WiredHome 77:9206c13aa527 1977 #define TPCR0 0x70
WiredHome 77:9206c13aa527 1978 #define TPCR1 0x71
WiredHome 77:9206c13aa527 1979 #define TPXH 0x72
WiredHome 77:9206c13aa527 1980 #define TPYH 0x73
WiredHome 77:9206c13aa527 1981 #define TPXYL 0x74
WiredHome 77:9206c13aa527 1982 #define INTC1 0xF0
WiredHome 77:9206c13aa527 1983 #define INTC2 0xF1
hexley 54:e117ad10fba6 1984
hexley 54:e117ad10fba6 1985 /// Specify the default settings for the Touch Panel, where different from the chip defaults
WiredHome 77:9206c13aa527 1986 #define TP_MODE_DEFAULT TP_MODE_AUTO
WiredHome 77:9206c13aa527 1987 #define TP_DEBOUNCE_DEFAULT TP_DEBOUNCE_ON
WiredHome 77:9206c13aa527 1988 #define TP_ADC_CLKDIV_DEFAULT TP_ADC_CLKDIV_8
hexley 54:e117ad10fba6 1989
WiredHome 77:9206c13aa527 1990 #define TP_ADC_SAMPLE_DEFAULT_CLKS TP_ADC_SAMPLE_8192_CLKS
hexley 54:e117ad10fba6 1991
hexley 54:e117ad10fba6 1992 /// Other Touch Panel params
WiredHome 77:9206c13aa527 1993 #define TPBUFSIZE 16 // Depth of the averaging buffers for x and y data
hexley 54:e117ad10fba6 1994
WiredHome 83:7bad0068cca0 1995 // Needs both a ticker and a timer. (could have created a timer from the ticker, but this is easier).
WiredHome 83:7bad0068cca0 1996 // on a touch, the timer is reset.
WiredHome 83:7bad0068cca0 1997 // the ticker monitors the timer to see if it has been a long time since
WiredHome 83:7bad0068cca0 1998 // a touch, and if so, it then clears the sample counter so it doesn't get partial old
WiredHome 83:7bad0068cca0 1999 // and partial new.
WiredHome 83:7bad0068cca0 2000
WiredHome 83:7bad0068cca0 2001 /// Touch State used by TouchPanelReadable. @see TouchCode_t.
WiredHome 83:7bad0068cca0 2002 TouchCode_t touchState;
WiredHome 83:7bad0068cca0 2003
WiredHome 83:7bad0068cca0 2004 /// Touch Panel ticker
WiredHome 83:7bad0068cca0 2005 Ticker touchTicker;
WiredHome 83:7bad0068cca0 2006
WiredHome 83:7bad0068cca0 2007 /// Touch Panel timer
WiredHome 83:7bad0068cca0 2008 Timer touchTimer;
WiredHome 83:7bad0068cca0 2009
WiredHome 83:7bad0068cca0 2010 /// keeps track of which sample we're collecting to filter out the noise.
WiredHome 83:7bad0068cca0 2011 int touchSample;
WiredHome 83:7bad0068cca0 2012
WiredHome 83:7bad0068cca0 2013 /// Private function for touch ticker callback.
WiredHome 83:7bad0068cca0 2014 void _TouchTicker(void);
WiredHome 83:7bad0068cca0 2015
WiredHome 77:9206c13aa527 2016 /// Touch Panel calibration matrix.
WiredHome 77:9206c13aa527 2017 tpMatrix_t tpMatrix;
hexley 54:e117ad10fba6 2018
WiredHome 29:422616aa04bd 2019 /// Internal function to put a character using the built-in (internal) font engine
WiredHome 29:422616aa04bd 2020 ///
WiredHome 72:ecffe56af969 2021 /// @param[in] is the character to put to the screen.
WiredHome 29:422616aa04bd 2022 /// @returns the character put.
WiredHome 29:422616aa04bd 2023 ///
WiredHome 29:422616aa04bd 2024 int _internal_putc(int c);
WiredHome 29:422616aa04bd 2025
WiredHome 29:422616aa04bd 2026 /// Internal function to put a character using the external font engine
WiredHome 29:422616aa04bd 2027 ///
WiredHome 72:ecffe56af969 2028 /// @param[in] is the character to put to the screen.
WiredHome 29:422616aa04bd 2029 /// @returns the character put.
WiredHome 29:422616aa04bd 2030 ///
WiredHome 29:422616aa04bd 2031 int _external_putc(int c);
WiredHome 29:422616aa04bd 2032
WiredHome 19:3f82c1161fd2 2033 /// Select the peripheral to use it.
WiredHome 19:3f82c1161fd2 2034 ///
WiredHome 72:ecffe56af969 2035 /// @param[in] chipsel when true will select the peripheral, and when false
WiredHome 19:3f82c1161fd2 2036 /// will deselect the chip. This is the logical selection, and
WiredHome 19:3f82c1161fd2 2037 /// the pin selection is the invert of this.
WiredHome 19:3f82c1161fd2 2038 /// @returns success/failure code. @see RetCode_t.
WiredHome 19:3f82c1161fd2 2039 ///
WiredHome 79:544eb4964795 2040 RetCode_t _select(bool chipsel);
WiredHome 19:3f82c1161fd2 2041
WiredHome 66:468a11f05580 2042 /// Wait while the status register indicates the controller is busy.
WiredHome 66:468a11f05580 2043 ///
WiredHome 72:ecffe56af969 2044 /// @param[in] mask is the mask of bits to monitor.
WiredHome 66:468a11f05580 2045 /// @returns true if a normal exit.
WiredHome 66:468a11f05580 2046 /// @returns false if a timeout exit.
WiredHome 66:468a11f05580 2047 ///
WiredHome 66:468a11f05580 2048 bool _WaitWhileBusy(uint8_t mask);
WiredHome 66:468a11f05580 2049
WiredHome 66:468a11f05580 2050 /// Wait while the the register anded with the mask is true.
WiredHome 66:468a11f05580 2051 ///
WiredHome 72:ecffe56af969 2052 /// @param[in] reg is the register to monitor
WiredHome 72:ecffe56af969 2053 /// @param[in] mask is the bit mask to monitor
WiredHome 66:468a11f05580 2054 /// @returns true if it was a normal exit
WiredHome 66:468a11f05580 2055 /// @returns false if it was a timeout that caused the exit.
WiredHome 66:468a11f05580 2056 ///
WiredHome 66:468a11f05580 2057 bool _WaitWhileReg(uint8_t reg, uint8_t mask);
WiredHome 66:468a11f05580 2058
WiredHome 68:ab08efabfc88 2059 /// set the spi port to either the write or the read speed.
WiredHome 68:ab08efabfc88 2060 ///
WiredHome 68:ab08efabfc88 2061 /// This is a private API used to toggle between the write
WiredHome 68:ab08efabfc88 2062 /// and the read speed for the SPI port to the RA8875, since
WiredHome 68:ab08efabfc88 2063 /// it can accept writes faster than reads.
WiredHome 68:ab08efabfc88 2064 ///
WiredHome 72:ecffe56af969 2065 /// @param[in] writeSpeed when true selects the write frequency,
WiredHome 68:ab08efabfc88 2066 /// and when false it selects the read frequency.
WiredHome 68:ab08efabfc88 2067 ///
WiredHome 68:ab08efabfc88 2068 void _setWriteSpeed(bool writeSpeed);
WiredHome 68:ab08efabfc88 2069
WiredHome 19:3f82c1161fd2 2070 /// The most primitive - to write a data value to the SPI interface.
WiredHome 19:3f82c1161fd2 2071 ///
WiredHome 72:ecffe56af969 2072 /// @param[in] data is the value to write.
WiredHome 19:3f82c1161fd2 2073 /// @returns a value read from the port, since SPI is often shift
WiredHome 19:3f82c1161fd2 2074 /// in while shifting out.
WiredHome 19:3f82c1161fd2 2075 ///
WiredHome 79:544eb4964795 2076 unsigned char _spiwrite(unsigned char data);
WiredHome 19:3f82c1161fd2 2077
WiredHome 19:3f82c1161fd2 2078 /// The most primitive - to read a data value to the SPI interface.
WiredHome 19:3f82c1161fd2 2079 ///
WiredHome 19:3f82c1161fd2 2080 /// This is really just a specialcase of the write command, where
WiredHome 19:3f82c1161fd2 2081 /// the value zero is written in order to read.
WiredHome 19:3f82c1161fd2 2082 ///
WiredHome 19:3f82c1161fd2 2083 /// @returns a value read from the port, since SPI is often shift
WiredHome 19:3f82c1161fd2 2084 /// in while shifting out.
WiredHome 19:3f82c1161fd2 2085 ///
WiredHome 79:544eb4964795 2086 unsigned char _spiread();
WiredHome 19:3f82c1161fd2 2087
WiredHome 75:ca78388cfd77 2088 const uint8_t * pKeyMap;
WiredHome 75:ca78388cfd77 2089
WiredHome 19:3f82c1161fd2 2090 SPI spi; ///< spi port
WiredHome 68:ab08efabfc88 2091 bool spiWriteSpeed; ///< indicates if the current mode is write or read
WiredHome 68:ab08efabfc88 2092 unsigned long spiwritefreq; ///< saved write freq
WiredHome 66:468a11f05580 2093 unsigned long spireadfreq; ///< saved read freq
WiredHome 19:3f82c1161fd2 2094 DigitalOut cs; ///< chip select pin, assumed active low
WiredHome 19:3f82c1161fd2 2095 DigitalOut res; ///< reset pin, assumed active low
WiredHome 90:d113d71ae4f0 2096
WiredHome 90:d113d71ae4f0 2097 dim_t screenwidth; ///< configured screen width
WiredHome 90:d113d71ae4f0 2098 dim_t screenheight; ///< configured screen height
WiredHome 90:d113d71ae4f0 2099 bool portraitmode; ///< set true when in portrait mode (w,h are reversed)
WiredHome 90:d113d71ae4f0 2100
WiredHome 19:3f82c1161fd2 2101 const unsigned char * font; ///< reference to an external font somewhere in memory
WiredHome 98:ecebed9b80b2 2102 uint8_t extFontHeight; ///< computed from the font table when the user sets the font
WiredHome 98:ecebed9b80b2 2103 uint8_t extFontWidth; ///< computed from the font table when the user sets the font
WiredHome 98:ecebed9b80b2 2104
WiredHome 90:d113d71ae4f0 2105 loc_t cursor_x, cursor_y; ///< used for external fonts only
WiredHome 19:3f82c1161fd2 2106
WiredHome 19:3f82c1161fd2 2107 #ifdef PERF_METRICS
WiredHome 19:3f82c1161fd2 2108 typedef enum
WiredHome 19:3f82c1161fd2 2109 {
WiredHome 19:3f82c1161fd2 2110 PRF_CLS,
WiredHome 41:2956a0a221e5 2111 PRF_DRAWPIXEL,
WiredHome 41:2956a0a221e5 2112 PRF_PIXELSTREAM,
WiredHome 41:2956a0a221e5 2113 PRF_READPIXEL,
WiredHome 41:2956a0a221e5 2114 PRF_READPIXELSTREAM,
WiredHome 19:3f82c1161fd2 2115 PRF_DRAWLINE,
WiredHome 19:3f82c1161fd2 2116 PRF_DRAWRECTANGLE,
WiredHome 19:3f82c1161fd2 2117 PRF_DRAWROUNDEDRECTANGLE,
WiredHome 19:3f82c1161fd2 2118 PRF_DRAWTRIANGLE,
WiredHome 19:3f82c1161fd2 2119 PRF_DRAWCIRCLE,
WiredHome 19:3f82c1161fd2 2120 PRF_DRAWELLIPSE,
WiredHome 19:3f82c1161fd2 2121 METRICCOUNT
WiredHome 19:3f82c1161fd2 2122 } method_e;
WiredHome 19:3f82c1161fd2 2123 unsigned long metrics[METRICCOUNT];
WiredHome 75:ca78388cfd77 2124 unsigned long idletime_usec;
WiredHome 19:3f82c1161fd2 2125 void RegisterPerformance(method_e method);
WiredHome 19:3f82c1161fd2 2126 Timer performance;
WiredHome 19:3f82c1161fd2 2127 #endif
WiredHome 96:40b74dd3695b 2128
WiredHome 96:40b74dd3695b 2129 RetCode_t _printCallback(RA8875::filecmd_t cmd, uint8_t * buffer, uint16_t size);
WiredHome 96:40b74dd3695b 2130
WiredHome 96:40b74dd3695b 2131 FILE * _printFH; ///< PrintScreen file handle
WiredHome 96:40b74dd3695b 2132
WiredHome 96:40b74dd3695b 2133 RetCode_t privateCallback(filecmd_t cmd, uint8_t * buffer, uint16_t size) {
WiredHome 96:40b74dd3695b 2134 if (c_callback != NULL) {
WiredHome 96:40b74dd3695b 2135 return (*c_callback)(cmd, buffer, size);
WiredHome 96:40b74dd3695b 2136 }
WiredHome 96:40b74dd3695b 2137 else {
WiredHome 96:40b74dd3695b 2138 if (obj_callback != NULL && method_callback != NULL) {
WiredHome 96:40b74dd3695b 2139 return (obj_callback->*method_callback)(cmd, buffer, size);
WiredHome 96:40b74dd3695b 2140 }
WiredHome 96:40b74dd3695b 2141 }
WiredHome 96:40b74dd3695b 2142 return noerror;
WiredHome 96:40b74dd3695b 2143 }
WiredHome 96:40b74dd3695b 2144
WiredHome 96:40b74dd3695b 2145 RetCode_t (* c_callback)(filecmd_t cmd, uint8_t * buffer, uint16_t size);
WiredHome 96:40b74dd3695b 2146 FPointerDummy *obj_callback;
WiredHome 96:40b74dd3695b 2147 RetCode_t (FPointerDummy::*method_callback)(filecmd_t cmd, uint8_t * buffer, uint16_t size);
WiredHome 19:3f82c1161fd2 2148 };
WiredHome 19:3f82c1161fd2 2149
WiredHome 96:40b74dd3695b 2150
WiredHome 19:3f82c1161fd2 2151 //} // namespace
WiredHome 19:3f82c1161fd2 2152
WiredHome 19:3f82c1161fd2 2153 //using namespace SW_graphics;
WiredHome 19:3f82c1161fd2 2154
WiredHome 23:a50ded45dbaf 2155
WiredHome 23:a50ded45dbaf 2156 #ifdef TESTENABLE
WiredHome 23:a50ded45dbaf 2157 // ______________ ______________ ______________ _______________
WiredHome 23:a50ded45dbaf 2158 // /_____ _____/ / ___________/ / ___________/ /_____ ______/
WiredHome 23:a50ded45dbaf 2159 // / / / / / / / /
WiredHome 23:a50ded45dbaf 2160 // / / / /___ / /__________ / /
WiredHome 23:a50ded45dbaf 2161 // / / / ____/ /__________ / / /
WiredHome 23:a50ded45dbaf 2162 // / / / / / / / /
WiredHome 23:a50ded45dbaf 2163 // / / / /__________ ___________/ / / /
WiredHome 23:a50ded45dbaf 2164 // /__/ /_____________/ /_____________/ /__/
WiredHome 23:a50ded45dbaf 2165
WiredHome 23:a50ded45dbaf 2166 #include "WebColors.h"
WiredHome 23:a50ded45dbaf 2167 #include <algorithm>
WiredHome 23:a50ded45dbaf 2168
WiredHome 23:a50ded45dbaf 2169 extern "C" void mbed_reset();
WiredHome 23:a50ded45dbaf 2170
WiredHome 23:a50ded45dbaf 2171 /// This activates a small set of tests for the graphics library.
WiredHome 23:a50ded45dbaf 2172 ///
WiredHome 23:a50ded45dbaf 2173 /// Call this API and pass it the reference to the display class.
WiredHome 23:a50ded45dbaf 2174 /// It will then run a series of tests. It accepts interaction via
WiredHome 23:a50ded45dbaf 2175 /// stdin to switch from automatic test mode to manual, run a specific
WiredHome 23:a50ded45dbaf 2176 /// test, or to exit the test mode.
WiredHome 23:a50ded45dbaf 2177 ///
WiredHome 72:ecffe56af969 2178 /// @param[in] lcd is a reference to the display class.
WiredHome 72:ecffe56af969 2179 /// @param[in] pc is a reference to a serial interface, typically the USB to PC.
WiredHome 23:a50ded45dbaf 2180 ///
WiredHome 23:a50ded45dbaf 2181 void RunTestSet(RA8875 & lcd, Serial & pc);
WiredHome 23:a50ded45dbaf 2182
WiredHome 23:a50ded45dbaf 2183
WiredHome 23:a50ded45dbaf 2184 // To enable the test code, uncomment this section, or copy the
WiredHome 23:a50ded45dbaf 2185 // necessary pieces to your "main()".
WiredHome 23:a50ded45dbaf 2186 //
WiredHome 23:a50ded45dbaf 2187 // #include "mbed.h"
WiredHome 23:a50ded45dbaf 2188 // #include "RA8875.h"
WiredHome 23:a50ded45dbaf 2189 // RA8875 lcd(p5, p6, p7, p12, NC, "tft"); // MOSI, MISO, SCK, /ChipSelect, /reset, name
WiredHome 23:a50ded45dbaf 2190 // Serial pc(USBTX, USBRX);
WiredHome 23:a50ded45dbaf 2191 // extern "C" void mbed_reset();
WiredHome 23:a50ded45dbaf 2192 // int main()
WiredHome 23:a50ded45dbaf 2193 // {
WiredHome 23:a50ded45dbaf 2194 // pc.baud(460800); // I like a snappy terminal, so crank it up!
WiredHome 23:a50ded45dbaf 2195 // pc.printf("\r\nRA8875 Test - Build " __DATE__ " " __TIME__ "\r\n");
WiredHome 23:a50ded45dbaf 2196 //
WiredHome 23:a50ded45dbaf 2197 // pc.printf("Turning on display\r\n");
WiredHome 23:a50ded45dbaf 2198 // lcd.Reset();
WiredHome 23:a50ded45dbaf 2199 // lcd.Power(true); // display power is on, but the backlight is independent
WiredHome 23:a50ded45dbaf 2200 // lcd.Backlight(0.5);
WiredHome 23:a50ded45dbaf 2201 // RunTestSet(lcd, pc);
WiredHome 23:a50ded45dbaf 2202 // }
WiredHome 23:a50ded45dbaf 2203
WiredHome 23:a50ded45dbaf 2204 #endif // TESTENABLE
WiredHome 23:a50ded45dbaf 2205
WiredHome 56:7a85d226ad0d 2206 #endif