mbed 64128k cog st7565r breakout
Page last updated 02 Feb 2012, by 
FRASER PHILLIPS.
1 reply
FRASER PHILLIPS.
1 reply
1 comment on mbed 64128k cog st7565r breakout:
Please log in to post comments.
mbed 64128k cog st7565r breakout
Page owner: FRASER PHILLIPS
Created 02 Feb 2012.
Last updated 02 Feb 2012
The following image is a breakout board to assist with rapid code development for a Displaytech 64128K COG FSTN GLCD (ST7565R controller). The LPC1768 (mbed) is to drive the GLCD in response to command sets received over a UART(Tx/Rx) port from a Main Board.
The following is a pin mapping from the mbed to the LPC1768 LQFP100 package:-
The plan is to prototype the above schematic in parallel with putting down a LPC1768FBD100 part with standard JTAG access, with 6-way FPC connector (UART comms + power to Main Board) and 64128K COG FSTN GLCD for formal product development.