lwip 1.4 - DM9161A PHY

Homepage

After reading topic http://mbed.org/forum/mbed/topic/3684/?page=1#comment-18473, i created the lpc_phy_DM9161A.c file (used lpc_phy_lan8720.c as a template).

Partially working

Auto negotiation and DHCP are OK - ethernet communication is not working.

There seems to be a communication problem between the EMAC and PHY (timing?). Any ideas on how to resolve this issue are welcome.

A debug log is available at /media/uploads/frankvnk/tcpsocket_helloworld_with_dm9161a_phy_-_debug_log.txt. The log file indicates a pbuf problem. Further investigation led me to following webpage: http://www.lpcware.com/content/forum/lwip-sample-fail#comment-1785. I tried again with the mentioned modification but then DHCP does not work. I don't know if this modification also needs to be implemented (not present in the current lwip library).

How to test

import http://mbed.org/users/mbed_official/code/TCPSocket_HelloWorld/ into the mbed compiler.

Goto folder EthernetInterface\lwip-eth\arch#

Delete lpc_phy_dp83848.c.

Copy lpc_phy_DM9161A.c into this folder.

Add following MAC address definition in main.cpp (before 'EthernetInterface eth;').

       extern "C" void mbed_mac_address(char * mac)
       {
       // define your own MAC Address
         mac[0] = 0x00;  
         mac[1] = 0x1F;  
         mac[2] = 0x33;  
         mac[3] = 0x42;  
         mac[4] = 0xFC;  
         mac[5] = 0x6F;           
       };

When used with the Mini-DK hardware

Modify EthernetInterface\lwip-eth\arch\lpc_emac_config.h:

Change #define LPC_PHYDEF_PHYADDR 1 to #define LPC_PHYDEF_PHYADDR 19

On the Mini-DK, sometimes no IP address is obtained when the 'Reset' button is pressed after programming the device. Disconnect and reconnect the device and press the 'Reset' button again to restart.


All wikipages