Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F303RE/stm32f3xx_hal_comp_ex.h
- Committer:
- elijahorr
- Date:
- 2016-04-14
- Revision:
- 121:672067c3ada4
- Parent:
- 93:e188a91d3eaa
File content as of revision 121:672067c3ada4:
/**
******************************************************************************
* @file stm32f3xx_hal_comp_ex.h
* @author MCD Application Team
* @version V1.1.0
* @date 12-Sept-2014
* @brief Header file of COMP HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F3xx_HAL_COMP_EX_H
#define __STM32F3xx_HAL_COMP_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal_def.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
/** @defgroup COMPEx COMP Extended HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup COMPEx_Exported_Constants COMP Extended Exported Constants
* @{
*/
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F302xE/STM32F303xE/STM32F398xx/STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3,
PE8 for COMP4, PD13 for COMP5, PD10 for COMP6,
PC0 for COMP7) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5,
PB15 for COMP6) connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_IO2))
/**
* @}
*/
#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_IO1))
/**
* @}
*/
#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC2_CH1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_CH1_OUT connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_0) /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_1) /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT ((uint32_t)(COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0)) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 ((uint32_t)COMP_CSR_COMPxINSEL_2) /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0)) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1)) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC2_CH1 ((uint32_t)COMP_CSR_COMPxINSEL) /*!< DAC2_CH1_OUT connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
/**
* @}
*/
#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
/* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
PA0 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5,
PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F302xB/xC, STM32F303xB/xC, STM32F358xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
((((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2))))
#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMPxNONINSEL | COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
/**
* @}
*/
#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP2_CSR_COMP2INPDAC /*!< DAC ouput connected to comparator COMP2 non inverting input */
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F301x6/x8, STM32F302x6/x8, STM32F318xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP2) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define COMP_CSR_COMPxNONINSEL_MASK (COMP2_CSR_COMP2INPDAC) /*!< COMP_CSR_COMPxNONINSEL mask */
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F373xB/xC, STM32F378xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
/**
* @}
*/
#elif defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xE/STM32F303xE/STM32F398xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
PA0 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F302xE/STM32F303xE/STM32F398xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define COMP_CSR_COMPxNONINSEL_MASK (COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
/**
* @}
*/
#else
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (Other Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
connected to comparator non inverting input */
/*!< Non inverting input not available */
#define IS_COMP_NONINVERTINGINPUT(INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
#define COMP_CSR_COMPxNONINSEL_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
/**
* @}
*/
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F302xC)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F302xC Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP1, COMP2, COMP4, COMP6 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2_BRK2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 */
/* Output Redirection common for COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
/* Output Redirection common for COMP1,COMP2 and COMP4 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4))
/**
* @}
*/
#elif defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP1...COMP7 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */
#define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */
/* Output Redirection common for COMP1, COMP2 and COMP3 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
/* Output Redirection common for COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP3 */
#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */
#define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */
#define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */
#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP5 */
#define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */
#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
#define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */
#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
/* Output Redirection specific to COMP7 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
#define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */
#define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */
#define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
/**
* @}
*/
#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
/**
* @}
*/
#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F373xC/STM32F378xx Product devices)
* @{
*/
/* Output Redirection common for all comparators COMP1 and COMP2 */
#define COMP_OUTPUT_NONE ((uint32_t)0x0000) /*!< COMP output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM3 OCREF Clear */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x0400) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP output connected to TIM2 OCREF Clear */
/* Output Redirection specific to COMP1 */
#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM15 Break Input */
#define COMP_OUTPUT_TIM5IC4 ((uint32_t)0x0600) /*!< COMP output connected to TIM5 Input Capture 4 */
#define COMP_OUTPUT_TIM5OCREFCLR ((uint32_t)0x0700) /*!< COMP output connected to TIM5 OCREF Clear */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM16 Break Input */
#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM4 Input Capture 1 */
#define COMP_OUTPUT_TIM4OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM4 OCREF Clear */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN))
/**
* @}
*/
#elif defined(STM32F302xE)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F302xE Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP1, COMP2, COMP4, COMP6 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2_BRK2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 */
/* Output Redirection common for COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4))
/**
* @}
*/
#elif defined(STM32F303xE) || defined(STM32F398xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xE/STM32F398xx Product devices)
* @{
*/
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP1...COMP7 */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */
#define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */
#define COMP_OUTPUT_TIM20BKIN ((uint32_t)0x00003000) /*!< COMP output connected to TIM20 Break Input (BKIN) */
#define COMP_OUTPUT_TIM20BKIN2 ((uint32_t)0x00003400) /*!< COMP output connected to TIM20 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2 ((uint32_t)0x00003800) /*!< COMP output connected to TIM1 Break Input 2, TIM8 Break Input 2 and TIM20 Break Input 2 */
/* Output Redirection common for COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM20OCREFCLR ((uint32_t)0x00003C00) /*!< COMP output connected to TIM20 OCREF Clear */
/* Output Redirection specific to COMP3 */
#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */
#define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */
#define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */
#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP5 */
#define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */
#define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */
#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
/* Output Redirection specific to COMP7 */
#define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */
#define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */
#define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM20OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
/**
* @}
*/
#endif /* STM32F302xC */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
#define COMP_WINDOWMODE_ENABLED COMP_CSR_COMPxWNDWEN /*!< Window mode enabled: non inverting input of comparator X (x=2,4,6)
is connected to the non inverting input of comparator X-1 */
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
#define COMP_WINDOWMODE_ENABLED ((uint32_t)COMP_CSR_COMPxWNDWEN) /*!< Window mode enabled: non inverting input of comparator 2
is connected to the non inverting input of comparator 1 (PA1) */
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
/**
* @}
*/
#else
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (Other Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled (not available) */
#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
#define COMP_CSR_COMPxWNDWEN_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
/**
* @}
*/
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
/** @defgroup COMPEx_Mode COMP Extended Mode
* @{
*/
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F373xC) || defined(STM32F378xx)
/* Please refer to the electrical characteristics in the device datasheet for
the power consumption values */
#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMPxMODE_0 /*!< Medium Speed */
#define COMP_MODE_LOWPOWER COMP_CSR_COMPxMODE_1 /*!< Low power mode */
#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMPxMODE /*!< Ultra-low power mode */
#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
((MODE) == COMP_MODE_MEDIUMSPEED) || \
((MODE) == COMP_MODE_LOWPOWER) || \
((MODE) == COMP_MODE_ULTRALOWPOWER))
#define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */
#else
/*!< Power mode not available */
#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
#define COMP_CSR_COMPxMODE_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
/**
* @}
*/
/** @defgroup COMPEx_Hysteresis COMP Extended Hysteresis
* @{
*/
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F373xC) || defined(STM32F378xx)
#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
#define COMP_HYSTERESIS_LOW COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */
#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */
#define COMP_HYSTERESIS_HIGH COMP_CSR_COMPxHYST /*!< Hysteresis level high */
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
#define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */
#else
#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
#define COMP_CSR_COMPxHYST_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
/**
* @}
*/
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
/* Blanking source for COMP2 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */
/* Blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6/8, STM32F318xx/STM32F328xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
((((INSTANCE) == COMP2) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
/**
* @}
*/
/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
* Elements values convention: XXXXZYYY
* - XXXX : Interrupt mask in the register list where Z equal 0x0
* - YYY : Interrupt mask in the register list where Z equal 0x1
* - Z : register index(4bits)
* - 0x0: EMR/IMR/RTSR/FTSR register
* - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
* @{
*/
#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
/**
* @}
*/
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xE) ||\
defined(STM32F302xC)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F302xE/STM32F302xC Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for comparator */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for comparator */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for comparator */
/* Blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for comparator */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for comparator */
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F302xB/STM32F302xC/STM32F302xE devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
/**
* @}
*/
/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F302xC Product devices)
* Elements values convention: XXXXZYYY
* - XXXX : Interrupt mask in the register list where Z equal 0x0
* - YYY : Interrupt mask in the register list where Z equal 0x1
* - Z : register index(4bits)
* - 0x0: EMR/IMR/RTSR/FTSR register
* - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
* @{
*/
#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
/**
* @}
*/
#endif /* STM32F302xE || */
/* STM32F302xC */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F303xE/STM32F398xx/STM32F303xC/STM32F358xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
/* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for comparator */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for comparator */
/* Blanking source common for COMP1, COMP2 and COMP5 */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC3 selected as blanking source for comparator */
/* Blanking source common for COMP3 and COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for comparator */
/* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */
#define COMP_BLANKINGSRCE_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for comparator */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for comparator */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for comparator */
/* Blanking source common for COMP6 and COMP7 */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for comparator */
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F303xE/STM32F398xx/STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP3) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP5) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \
|| \
(((INSTANCE) == COMP7) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
/**
* @}
*/
/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F303xE/STM32F398xx/STM32F303xC/STM32F358xx Product devices)
* Elements values convention: XXXXZYYY
* - XXXX : Interrupt mask in the register list where Z equal 0x0
* - YYY : Interrupt mask in the register list where Z equal 0x1
* - Z : register index(4bits)
* - 0x0: EMR/IMR/RTSR/FTSR register
* - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
* @{
*/
#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
#define COMP_EXTI_LINE_COMP3_EVENT ((uint32_t)0x20000000) /*!< External interrupt line 29 Connected to COMP3 */
#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
#define COMP_EXTI_LINE_COMP5_EVENT ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to COMP5 */
#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
#define COMP_EXTI_LINE_COMP7_EVENT ((uint32_t)0x00001002) /*!< External interrupt line 33 Connected to COMP7 */
/**
* @}
*/
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F373xC) ||defined(STM32F378xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F373xC/STM32F378xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
#define IS_COMP_BLANKINGSRCE(SOURCE) ((SOURCE) == (SOURCE)) /*!< Not available: check always true */
/* STM32F373xB/STM32F373xC/STM32F378xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE))
#define COMP_CSR_COMPxBLANKING_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
/**
* @}
*/
/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F373xC/STM32F378xx Product devices)
* Elements values convention: XXXX0000
* - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
* @{
*/
#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
/**
* @}
*/
#endif /* STM32F373xC || STM32F378xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
/* CSR register reset value */
#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
#define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF)
#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE)
/* CSR COMP1/COMP2 shift */
#define COMP_CSR_COMP1_SHIFT 0U
#define COMP_CSR_COMP2_SHIFT 16U
#else
/* CSR register reset value */
#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
#endif /* STM32F373xC || STM32F378xx */
/* CSR masks redefinition for internal use */
#define COMP_CSR_COMPxINSEL_MASK COMP_CSR_COMPxINSEL /*!< COMP_CSR_COMPxINSEL Mask */
#define COMP_CSR_COMPxOUTSEL_MASK COMP_CSR_COMPxOUTSEL /*!< COMP_CSR_COMPxOUTSEL Mask */
#define COMP_CSR_COMPxPOL_MASK COMP_CSR_COMPxPOL /*!< COMP_CSR_COMPxPOL Mask */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup USARTEx_Exported_Macros USART Extended Exported Macros
* @{
*/
#if defined(STM32F373xC) ||defined(STM32F378xx)
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __FLAG__: specifies the COMP Exti sources to be checked.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval The state of __FLAG__ (SET or RESET).
*/
#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
/**
* @brief Clear the COMP Exti flags.
* @param __FLAG__: specifies the COMP Exti sources to be cleared.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
/**
* @brief Enable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
/**
* @brief Disable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
/**
* @brief Enable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
/**
* @brief Disable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
/**
* @brief Enable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
/**
* @brief Disable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
/**
* @brief Init a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @note The common output selection is checked versus the COMP instance to set the right output configuration
* @retval None.
*/
#define COMP_OUTPUT_COMP2_TIM2IC4 ((uint32_t)0x0400) /*!< COMP2 output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_COMP2_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP2 output connected to TIM4 OCREF Clear */
#define COMP_OUTPUT_COMP2_TIM3IC1 ((uint32_t)0x0600) /*!< COMP2 output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_COMP2_TIM3OCREFCLR ((uint32_t)0x0700) /*!< COMP2 output connected to TIM3 OCREF Clear */
#define COMP_INIT(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
uint32_t compoutput = (__HANDLE__)->Init.Output; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
switch((__HANDLE__)->Init.Output) \
{ \
case COMP_OUTPUT_TIM2IC4: \
compoutput = COMP_OUTPUT_COMP2_TIM2IC4; \
break; \
case COMP_OUTPUT_TIM2OCREFCLR: \
compoutput = COMP_OUTPUT_COMP2_TIM2OCREFCLR; \
break; \
case COMP_OUTPUT_TIM3IC1: \
compoutput = COMP_OUTPUT_COMP2_TIM3IC1; \
break; \
case COMP_OUTPUT_TIM3OCREFCLR: \
compoutput = COMP_OUTPUT_COMP2_TIM3OCREFCLR; \
break; \
default: \
break; \
} \
} \
\
MODIFY_REG(COMP->CSR, \
(COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, \
((__HANDLE__)->Init.InvertingInput | \
(__HANDLE__)->Init.NonInvertingInput | \
compoutput | \
(__HANDLE__)->Init.OutputPol | \
(__HANDLE__)->Init.Hysteresis | \
(__HANDLE__)->Init.Mode) << regshift); \
\
if((__HANDLE__)->Init.WindowMode != COMP_WINDOWMODE_DISABLED) \
{ \
COMP->CSR |= COMP_CSR_WNDWEN; \
} \
} while(0)
/**
* @brief DeInit a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_DEINIT(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
MODIFY_REG(COMP->CSR, \
COMP_CSR_RESET_PARAMETERS_MASK << regshift, \
COMP_CSR_RESET_VALUE << regshift); \
} while(0)
/**
* @brief Start a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_START(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
} while(0)
/**
* @brief Stop a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_STOP(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
} while(0)
/**
* @brief Lock a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_LOCK(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); \
} while(0)
#else
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __EXTILINE__: specifies the COMP Exti sources to be checked.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval The state of __FLAG__ (SET or RESET).
*/
#define __HAL_COMP_EXTI_GET_FLAG(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 & (__EXTILINE__)) : (EXTI->PR & (__EXTILINE__)))
/**
* @brief Clear the COMP Exti flags.
* @param __EXTILINE__: specifies the COMP Exti sources to be cleared.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_CLEAR_FLAG(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 = (__EXTILINE__)) : (EXTI->PR = (__EXTILINE__)))
/**
* @brief Enable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 |= (__EXTILINE__)) : (EXTI->IMR |= (__EXTILINE__)))
/**
* @brief Disable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 &= ~(__EXTILINE__)) : (EXTI->IMR &= ~(__EXTILINE__)))
/**
* @brief Enable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 |= (__EXTILINE__)) : (EXTI->RTSR |= (__EXTILINE__)))
/**
* @brief Disable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 &= ~(__EXTILINE__)) : (EXTI->RTSR &= ~(__EXTILINE__)))
/**
* @brief Enable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 |= (__EXTILINE__)) : (EXTI->FTSR |= (__EXTILINE__)))
/**
* @brief Disable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) \
((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 &= ~(__EXTILINE__)) : (EXTI->FTSR &= ~(__EXTILINE__)))
/**
* @brief Init a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_INIT(__HANDLE__) \
do { \
__IO uint32_t csrreg = 0; \
\
csrreg = READ_REG((__HANDLE__)->Instance->CSR); \
MODIFY_REG(csrreg, COMP_CSR_COMPxINSEL_MASK, (__HANDLE__)->Init.InvertingInput); \
MODIFY_REG(csrreg, COMP_CSR_COMPxNONINSEL_MASK, (__HANDLE__)->Init.NonInvertingInput); \
MODIFY_REG(csrreg, COMP_CSR_COMPxBLANKING_MASK, (__HANDLE__)->Init.BlankingSrce); \
MODIFY_REG(csrreg, COMP_CSR_COMPxOUTSEL_MASK, (__HANDLE__)->Init.Output); \
MODIFY_REG(csrreg, COMP_CSR_COMPxPOL_MASK, (__HANDLE__)->Init.OutputPol); \
MODIFY_REG(csrreg, COMP_CSR_COMPxHYST_MASK, (__HANDLE__)->Init.Hysteresis); \
MODIFY_REG(csrreg, COMP_CSR_COMPxMODE_MASK, (__HANDLE__)->Init.Mode); \
MODIFY_REG(csrreg, COMP_CSR_COMPxWNDWEN_MASK, (__HANDLE__)->Init.WindowMode); \
WRITE_REG((__HANDLE__)->Instance->CSR, csrreg); \
} while(0)
/**
* @brief DeInit a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_DEINIT(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->CSR, COMP_CSR_RESET_VALUE)
/**
* @brief Start a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_START(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
/**
* @brief Stop a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_STOP(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
/**
* @brief Lock a comparator instance
* @param __HANDLE__: specifies the COMP handle
* @retval None.
*/
#define COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxLOCK)
#endif /* STM32F373xC || STM32F378xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__: specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
COMP_EXTI_LINE_COMP6_EVENT)
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xE) || \
defined(STM32F302xC)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__: specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
COMP_EXTI_LINE_COMP6_EVENT)
#endif /* STM32F302xE || */
/* STM32F302xC */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__: specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3_EVENT : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
((__INSTANCE__) == COMP5) ? COMP_EXTI_LINE_COMP5_EVENT : \
((__INSTANCE__) == COMP6) ? COMP_EXTI_LINE_COMP6_EVENT : \
COMP_EXTI_LINE_COMP7_EVENT)
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F373xC) ||defined(STM32F378xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__: specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
COMP_EXTI_LINE_COMP2_EVENT)
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/* Initialization and de-initialization functions ****************************/
/* IO operation functions *****************************************************/
/* Peripheral Control functions ***********************************************/
/* Peripheral State and Error functions ***************************************/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F3xx_HAL_COMP_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/