Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.

Dependents:   1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB

Fork of mbed by mbed official

Revision:
107:4f6c30876dfa
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_hal_usart.h	Wed Sep 16 15:32:31 2015 +0100
@@ -0,0 +1,788 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_usart.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    26-June-2015
+  * @brief   Header file of USART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_USART_H
+#define __STM32L4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+  * @{
+  */
+
+/**
+  * @brief USART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the Usart communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                              Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))). */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref USARTEx_Word_Length. */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref USART_Stop_Bits. */
+
+  uint32_t Parity;                   /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref USART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref USART_Mode. */
+
+  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref USART_Clock_Polarity. */
+
+  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref USART_Clock_Phase. */
+
+  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref USART_Last_Bit. */
+}USART_InitTypeDef;
+
+/**
+  * @brief HAL USART State structures definition
+  */
+typedef enum
+{
+  HAL_USART_STATE_RESET             = 0x00,    /*!< Peripheral is not initialized                  */
+  HAL_USART_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use       */
+  HAL_USART_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                 */
+  HAL_USART_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing           */
+  HAL_USART_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing              */
+  HAL_USART_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission Reception process is ongoing */
+  HAL_USART_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                  */
+  HAL_USART_STATE_ERROR             = 0x04     /*!< Error                                          */
+}HAL_USART_StateTypeDef;
+
+/**
+  * @brief  HAL USART Error Code structure definition
+  */
+typedef enum
+{
+  HAL_USART_ERROR_NONE      = 0x00,    /*!< No error            */
+  HAL_USART_ERROR_PE        = 0x01,    /*!< Parity error        */
+  HAL_USART_ERROR_NE        = 0x02,    /*!< Noise error         */
+  HAL_USART_ERROR_FE        = 0x04,    /*!< frame error         */
+  HAL_USART_ERROR_ORE       = 0x08,    /*!< Overrun error       */
+  HAL_USART_ERROR_DMA       = 0x10     /*!< DMA transfer error  */
+}HAL_USART_ErrorTypeDef;
+
+/**
+  * @brief  USART clock sources definitions
+  */
+typedef enum
+{
+  USART_CLOCKSOURCE_PCLK1      = 0x00,    /*!< PCLK1 clock source     */
+  USART_CLOCKSOURCE_PCLK2      = 0x01,    /*!< PCLK2 clock source     */
+  USART_CLOCKSOURCE_HSI        = 0x02,    /*!< HSI clock source       */
+  USART_CLOCKSOURCE_SYSCLK     = 0x04,    /*!< SYSCLK clock source    */
+  USART_CLOCKSOURCE_LSE        = 0x08,    /*!< LSE clock source       */
+  USART_CLOCKSOURCE_UNDEFINED  = 0x10     /*!< Undefined clock source */
+}USART_ClockSourceTypeDef;
+
+
+/**
+  * @brief  USART handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                 *Instance;        /*!<  USART registers base address        */
+
+  USART_InitTypeDef             Init;             /*!< USART communication parameters      */
+
+  uint8_t                       *pTxBuffPtr;      /*!< Pointer to USART Tx transfer Buffer */
+
+  uint16_t                      TxXferSize;       /*!< USART Tx Transfer size              */
+
+  uint16_t                      TxXferCount;      /*!< USART Tx Transfer Counter           */
+
+  uint8_t                       *pRxBuffPtr;      /*!< Pointer to USART Rx transfer Buffer */
+
+  uint16_t                      RxXferSize;       /*!< USART Rx Transfer size              */
+
+  uint16_t                      RxXferCount;      /*!< USART Rx Transfer Counter           */
+
+  uint16_t                      Mask;             /*!< USART Rx RDR register mask          */
+
+  DMA_HandleTypeDef             *hdmatx;          /*!< USART Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef             *hdmarx;          /*!< USART Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef               Lock;            /*!<  Locking object                      */
+
+  __IO HAL_USART_StateTypeDef   State;           /*!< USART communication state           */
+
+  __IO uint32_t                 ErrorCode;       /*!< USART Error code                    */
+
+}USART_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+  * @{
+  */
+
+/** @defgroup USART_Stop_Bits  USART Number of Stop Bits
+  * @{
+  */                                                                                             
+#define USART_STOPBITS_1                    ((uint32_t)0x00000000)                            /*!< USART frame with 1 stop bit    */   
+#define USART_STOPBITS_1_5                  ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< USART frame with 1.5 stop bits */ 
+#define USART_STOPBITS_2                    ((uint32_t)USART_CR2_STOP_1)                      /*!< USART frame with 2 stop bits   */ 
+/**
+  * @}
+  */
+
+/** @defgroup USART_Parity    USART Parity
+  * @{
+  */
+#define USART_PARITY_NONE                   ((uint32_t)0x00000000)                      /*!< No parity   */
+#define USART_PARITY_EVEN                   ((uint32_t)USART_CR1_PCE)                   /*!< Even parity */
+#define USART_PARITY_ODD                    ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))  /*!< Odd parity  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Mode   USART Mode
+  * @{
+  */                                                                                    
+#define USART_MODE_RX                       ((uint32_t)USART_CR1_RE)                   /*!< RX mode        */ 
+#define USART_MODE_TX                       ((uint32_t)USART_CR1_TE)                   /*!< TX mode        */ 
+#define USART_MODE_TX_RX                    ((uint32_t)(USART_CR1_TE |USART_CR1_RE))   /*!< RX and TX mode */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Over_Sampling USART Over Sampling
+  * @{
+  */
+#define USART_OVERSAMPLING_16               ((uint32_t)0x00000000)          /*!< Oversampling by 16 */
+#define USART_OVERSAMPLING_8                ((uint32_t)USART_CR1_OVER8)     /*!< Oversampling by 8  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock  USART Clock
+  * @{
+  */
+#define USART_CLOCK_DISABLE                 ((uint32_t)0x00000000)        /*!< USART clock disable */
+#define USART_CLOCK_ENABLE                  ((uint32_t)USART_CR2_CLKEN)   /*!< USART clock enable  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Polarity  USART Clock Polarity
+  * @{
+  */
+#define USART_POLARITY_LOW                  ((uint32_t)0x00000000)       /*!< Driver enable signal is active high */
+#define USART_POLARITY_HIGH                 ((uint32_t)USART_CR2_CPOL)   /*!< Driver enable signal is active low  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Phase   USART Clock Phase
+  * @{
+  */
+#define USART_PHASE_1EDGE                   ((uint32_t)0x00000000)       /*!< USART frame phase on first clock transition  */
+#define USART_PHASE_2EDGE                   ((uint32_t)USART_CR2_CPHA)   /*!< USART frame phase on second clock transition */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Last_Bit  USART Last Bit
+  * @{
+  */
+#define USART_LASTBIT_DISABLE               ((uint32_t)0x00000000)       /*!< USART frame last data bit clock pulse not output to SCLK pin */
+#define USART_LASTBIT_ENABLE                ((uint32_t)USART_CR2_LBCL)   /*!< USART frame last data bit clock pulse output to SCLK pin     */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Request_Parameters  USART Request Parameters
+  * @{
+  */
+#define USART_RXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request  */
+#define USART_TXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Flags      USART Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define USART_FLAG_REACK                     ((uint32_t)0x00400000)    /*!< USART receive enable acknowledge flag  */  
+#define USART_FLAG_TEACK                     ((uint32_t)0x00200000)    /*!< USART transmit enable acknowledge flag */  
+#define USART_FLAG_BUSY                      ((uint32_t)0x00010000)    /*!< USART busy flag                        */  
+#define USART_FLAG_CTS                       ((uint32_t)0x00000400)    /*!< USART clear to send flag               */  
+#define USART_FLAG_CTSIF                     ((uint32_t)0x00000200)    /*!< USART clear to send interrupt flag     */  
+#define USART_FLAG_LBDF                      ((uint32_t)0x00000100)    /*!< USART LIN break detection flag         */  
+#define USART_FLAG_TXE                       ((uint32_t)0x00000080)    /*!< USART transmit data register empty     */  
+#define USART_FLAG_TC                        ((uint32_t)0x00000040)    /*!< USART transmission complete            */  
+#define USART_FLAG_RXNE                      ((uint32_t)0x00000020)    /*!< USART read data register not empty     */  
+#define USART_FLAG_IDLE                      ((uint32_t)0x00000010)    /*!< USART idle flag                        */  
+#define USART_FLAG_ORE                       ((uint32_t)0x00000008)    /*!< USART overrun error                    */  
+#define USART_FLAG_NE                        ((uint32_t)0x00000004)    /*!< USART noise error                      */  
+#define USART_FLAG_FE                        ((uint32_t)0x00000002)    /*!< USART frame error                      */  
+#define USART_FLAG_PE                        ((uint32_t)0x00000001)    /*!< USART parity error                     */  
+/**
+  * @}
+  */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+
+#define USART_IT_PE                          ((uint16_t)0x0028)     /*!< USART parity error interruption                 */   
+#define USART_IT_TXE                         ((uint16_t)0x0727)     /*!< USART transmit data register empty interruption */   
+#define USART_IT_TC                          ((uint16_t)0x0626)     /*!< USART transmission complete interruption        */   
+#define USART_IT_RXNE                        ((uint16_t)0x0525)     /*!< USART read data register not empty interruption */   
+#define USART_IT_IDLE                        ((uint16_t)0x0424)     /*!< USART idle interruption                         */   
+#define USART_IT_ERR                         ((uint16_t)0x0060)     /*!< USART error interruption                        */
+#define USART_IT_ORE                         ((uint16_t)0x0300)     /*!< USART overrun error interruption                */ 
+#define USART_IT_NE                          ((uint16_t)0x0200)     /*!< USART noise error interruption                  */ 
+#define USART_IT_FE                          ((uint16_t)0x0100)     /*!< USART frame error interruption                  */ 
+/**                                                                                                      
+  * @}                                                                                                   
+  */
+
+/** @defgroup USART_IT_CLEAR_Flags    USART Interruption Clear Flags
+  * @{
+  */
+#define USART_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag          */
+#define USART_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag         */
+#define USART_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag        */
+#define USART_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag         */
+#define USART_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< IDLE line detected Clear Flag    */
+#define USART_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF                      USART_ICR_CTSCF           /*!< CTS Interrupt Clear Flag         */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Interruption_Mask    USART Interruption Flags Mask
+  * @{
+  */                                                                     
+#define USART_IT_MASK                             ((uint16_t)0x001F)     /*!< USART interruptions flags mask */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+  * @{
+  */
+
+/** @brief Reset USART handle state.
+  * @param  __HANDLE__: USART handle.
+  * @retval None
+  */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__)  ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief  Check whether the specified USART flag is set or not.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg USART_FLAG_REACK: Receive enable acknowledge flag
+  *            @arg USART_FLAG_TEACK: Transmit enable acknowledge flag
+  *            @arg USART_FLAG_BUSY:  Busy flag
+  *            @arg USART_FLAG_CTS:   CTS Change flag
+  *            @arg USART_FLAG_TXE:   Transmit data register empty flag
+  *            @arg USART_FLAG_TC:    Transmission Complete flag
+  *            @arg USART_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg USART_FLAG_IDLE:  Idle Line detection flag
+  *            @arg USART_FLAG_ORE:   OverRun Error flag
+  *            @arg USART_FLAG_NE:    Noise Error flag
+  *            @arg USART_FLAG_FE:    Framing Error flag
+  *            @arg USART_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the specified USART pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg USART_CLEAR_PEF
+  *            @arg USART_CLEAR_FEF
+  *            @arg USART_CLEAR_NEF
+  *            @arg USART_CLEAR_OREF
+  *            @arg USART_CLEAR_IDLEF
+  *            @arg USART_CLEAR_TCF
+  *            @arg USART_CLEAR_LBDF
+  *            @arg USART_CLEAR_CTSF
+  *            @arg USART_CLEAR_RTOF
+  *            @arg USART_CLEAR_EOBF
+  *            @arg USART_CLEAR_CMF
+  *            @arg USART_CLEAR_WUF
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief  Clear the USART PE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__)   __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF)
+
+/** @brief  Clear the USART FE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__)   __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF)
+
+/** @brief  Clear the USART NE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__)  __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF)
+
+/** @brief  Clear the USART ORE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__)   __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF)
+
+/** @brief  Clear the USART IDLE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__)   __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF)
+
+/** @brief  Enable the specified USART interrupt.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __INTERRUPT__: specifies the USART interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:   Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_PE:   Parity Error interrupt
+  *            @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief  Disable the specified USART interrupt.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __INTERRUPT__: specifies the USART interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:   Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_PE:   Parity Error interrupt
+  *            @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief  Check whether the specified USART interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:  Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ORE: OverRun Error interrupt
+  *            @arg USART_IT_NE: Noise Error interrupt
+  *            @arg USART_IT_FE: Framing Error interrupt
+  *            @arg USART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief  Check whether the specified USART interrupt source is enabled or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:  Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ORE: OverRun Error interrupt
+  *            @arg USART_IT_NE: Noise Error interrupt
+  *            @arg USART_IT_FE: Framing Error interrupt
+  *            @arg USART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+                                                   (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+                                                   (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief  Clear the specified USART ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt.
+  *          This parameter can be one of the following values:
+  *            @arg USART_CLEAR_PEF: Parity Error Clear Flag
+  *            @arg USART_CLEAR_FEF: Framing Error Clear Flag
+  *            @arg USART_CLEAR_NEF: Noise detected Clear Flag
+  *            @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+  *            @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+  *            @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+  *            @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief  Set a specific USART request flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __REQ__: specifies the request flag to set.
+  *          This parameter can be one of the following values:
+  *            @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+  *            @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+  *
+  * @retval None
+  */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__)      ((__HANDLE__)->Instance->RQR |= (__REQ__))
+
+/** @brief  Enable the USART one bit sample method.
+  * @param  __HANDLE__: specifies the USART Handle.  
+  * @retval None
+  */     
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Disable the USART one bit sample method.
+  * @param  __HANDLE__: specifies the USART Handle.  
+  * @retval None
+  */      
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable USART.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable USART.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup USART_Private_Macros   USART Private Macros
+  * @{
+  */
+
+/** @brief  Report the USART clock source.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __CLOCKSOURCE__: output variable.
+  * @retval the USART clocking source, written in __CLOCKSOURCE__.
+  */
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
+  do {                                                         \
+    if((__HANDLE__)->Instance == USART1)                       \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART1_SOURCE())                   \
+       {                                                       \
+        case RCC_USART1CLKSOURCE_PCLK2:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2;         \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED;     \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+    else if((__HANDLE__)->Instance == USART2)                  \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART2_SOURCE())                   \
+       {                                                       \
+        case RCC_USART2CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1;         \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED;     \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+    else if((__HANDLE__)->Instance == USART3)                  \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART3_SOURCE())                   \
+       {                                                       \
+        case RCC_USART3CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1;         \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED;     \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+  } while(0)
+
+/** @brief  Check USART Baud rate.
+  * @param  __BAUDRATE__: Baudrate specified by the user.
+  *         The maximum Baud Rate is derived from the maximum clock on L4 (i.e. 80 MHz)
+  *         divided by the smallest oversampling used on the USART (i.e. 8).
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001)
+
+/**
+  * @brief Ensure that USART frame number of stop bits is valid.
+  * @param __STOPBITS__: USART frame number of stop bits. 
+  * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
+  */
+#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_1) || \
+                                         ((__STOPBITS__) == USART_STOPBITS_1_5) || \
+                                         ((__STOPBITS__) == USART_STOPBITS_2))
+
+/**
+  * @brief Ensure that USART frame parity is valid.
+  * @param __PARITY__: USART frame parity. 
+  * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+  */ 
+#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \
+                                     ((__PARITY__) == USART_PARITY_EVEN) || \
+                                     ((__PARITY__) == USART_PARITY_ODD))
+
+/**
+  * @brief Ensure that USART communication mode is valid.
+  * @param __MODE__: USART communication mode. 
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */ 
+#define IS_USART_MODE(__MODE__) ((((__MODE__) & (uint32_t)0xFFFFFFF3) == 0x00) && ((__MODE__) != (uint32_t)0x00))
+
+/**
+  * @brief Ensure that USART oversampling is valid.
+  * @param __SAMPLING__: USART oversampling. 
+  * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
+  */ 
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+                                             ((__SAMPLING__) == USART_OVERSAMPLING_8))
+
+/**
+  * @brief Ensure that USART clock state is valid.
+  * @param __CLOCK__: USART clock state. 
+  * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid)
+  */ 
+#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \
+                                   ((__CLOCK__) == USART_CLOCK_ENABLE))
+
+/**
+  * @brief Ensure that USART frame polarity is valid.
+  * @param __CPOL__: USART frame polarity. 
+  * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
+  */ 
+#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH))
+
+/**
+  * @brief Ensure that USART frame phase is valid.
+  * @param __CPHA__: USART frame phase. 
+  * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
+  */
+#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE))
+
+/**
+  * @brief Ensure that USART frame last bit clock pulse setting is valid.
+  * @param __LASTBIT__: USART frame last bit clock pulse setting. 
+  * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
+  */
+#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \
+                                       ((__LASTBIT__) == USART_LASTBIT_ENABLE))
+
+/**
+  * @brief Ensure that USART request parameter is valid.
+  * @param __PARAM__: USART request parameter. 
+  * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+  */
+#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \
+                                               ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST))
+
+/**
+  * @}
+  */
+
+/* Include USART HAL Extended module */
+#include "stm32l4xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+  * @{
+  */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+
+/**
+  * @}
+  */
+
+/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,  uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/**
+  * @}
+  */
+
+/* Peripheral Control functions ***********************************************/
+
+/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions
+  * @{
+  */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t               HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/