Simple code demonstrating how to configure MBed Network interface with DHCP or StaticIP (comment #define to switch between modes). Note: Demo program to be used on the GeekSessionLab Talk (November 2011). http://devrendezvous.com/?lang=en
Dependencies: EthernetNetIf mbed
main.cpp
- Committer:
- botdream
- Date:
- 2011-10-27
- Revision:
- 0:22c18588092c
File content as of revision 0:22c18588092c:
//--------------------------------------------------------------------------------------------- #include "mbed.h" #include "EthernetNetIf.h" //--------------------------------------------------------------------------------------------- DigitalOut myled(LED1); Serial pc(USBTX, USBRX); // tx, rx //--------------------------------------------------------------------------------------------- #define internaldebug // send debug messages to USB Serial port (9600,1,N) #define dhcpenable // auto-setup IP Address from DHCP router //--------------------------------------------------------------------------------------------- // Ethernet Object Setup //--------------------------------------------------------------------------------------------- #ifdef dhcpenable EthernetNetIf eth; #else EthernetNetIf eth( IpAddr(192,168,1,100), //IP Address IpAddr(255,255,255,0), //Network Mask IpAddr(192,168,1,254), //Gateway IpAddr(192,168,1,254) //DNS ); #endif //--------------------------------------------------------------------------------------------- // MAIN //--------------------------------------------------------------------------------------------- int main() { //-------------------------------------------------------- // Set Serial Port Transfer Rate pc.baud(115200); //-------------------------------------------------------- //-------------------------------------------------------- // Setting Ethernet //-------------------------------------------------------- #ifdef internaldebug printf("\r\nSetting up Ethernet interface!\r\n"); #endif // Create return object for error check EthernetErr ethErr = eth.setup(); if(ethErr) { #ifdef internaldebug printf("\r\nError %d in Ethernet setup.\r\n", ethErr); #endif return -1; } #ifdef internaldebug printf("\r\nEthernet setup completed with success!\r\n"); #endif //-------------------------------------------------------- // main loop while(1) { myled = 1; wait(0.5); myled = 0; wait(0.5); } } //---------------------------------------------------------------------------------------------