Dual CANbus monitor and instrumentation cluster

Eagle Schematic and Board design

/media/uploads/TickTock/canaryr5.zip

/media/uploads/TickTock/sch_r4.jpg /media/uploads/TickTock/lcdsch.jpg /media/uploads/TickTock/brd_r4.jpg

Parts List

qtyinstancepart #packagesupplierDescription
1BAT3Vhttp://www.ebay.com/itm/10x-CR2032-SMD-Battery-Holder-for-CR2032-Battery-/180938057979?pt=LH_DefaultDomain_0&hash=item2a20bfa8fbLithium 2032 coin battery holder
4C1-C4ECST1DC106R6032Tantalium capacitor 10uF
3FC1-FC3ZF1-20-01-T-WThttp://www.samtec.com/cable-systems/idc-ffc/ffc/zero-insertion.aspx20 conductor 1mm pitch flex cable connector (optional)
1FJ-20-R-08.00-4http://www.samtec.com/cable-systems/idc-ffc/ffc/zero-insertion.aspx8\" 20 conductor 1mm pitch flex connector, end reversed (optional)
2H1-H4(DON'T populate H1-H4 headers - solder mbed directly)
1H5http://www.ebay.com/itm/221186042943?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l26491x12 .1\" pitch header (optional)
1H62x6 .1\" pitch header (optional)
2IC1,IC2VP230LMDSOP8http://www.ebay.com/itm/130488665247?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649canbus transciever
1IC3LM1117-5VSOT2235V regulator
5JP*2 pin .1\" jumper header
1mbedLPC1768http://www.ebay.com/itm/200830573509?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649mbed uC
2Q1,Q22N2222SOT23General purpose NPN transistor
1R1R392M12063.9K resistor
4R2,R4-R6R102M12061K resistor
1R3R500M120650 Ohm resistor
2TR1-TR5ZJYS81R5-2PL51TG01http://www.digikey.com/product-detail/en/ZJYS81R5-2PL51T-G01/445-2223-1-ND/765232CM Choke
1Z11N5340BGC1702-15http://www.ebay.com/itm/150878122425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l26496V, 5W Zener Diode
1X1USBhttp://www.ebay.com/itm/New-Vertical-USB-2-0-A-pcb-connector-socket-USB-A-Type-/300553895292?pt=LH_DefaultDomain_0&hash=item45fa687d7cvertical USB connector
2LCD0,LCD1TFThttp://www.mikroe.com/add-on-boards/display/tft-proto/320x240 LCD with touch screen

Assembly

1) LCD Displays

I found ribbon cable is a nice way to organize the wires to the displays. You'll need 12 conductors and I connected them in the following order:

1LED+
2LED-
3RSTB
4MOSI
5SCLK
6CSB
7X+
8X-
9Y+
10Y-
11VDD
12GND

First I connected all the GND connections (IM0, IM1, IM3, & 2 GND). Do not connect the bottom GND until you have the ribbon cable connected. After making all the ribbon cable connections (connecting the GND of the ribbon cable to the bottom GND pad), solder the GND bar from the previous step to the back of the bottom GND connection. Finally, make a connection from the back side 3.3V pin to IM2. Take a break and repeat for the second display. /media/uploads/TickTock/lcdtop.jpg /media/uploads/TickTock/lcdbot.jpg Once the two displays are complete combine all wires except CS0, CS1, X+, X-, Y+, and Y-. Connect X- of the left display to X+ of the right. Similarly connect Y- of the left display to Y+ of the right. Insulate any exposed wires.

2) PCB

Refer to the schematics to place all the components on the board. If you plan to install into the CANary 3D enclosure, DO NOT install the battery holder or the socket for the mbed and, instead, connect two wires to the VB and GND pads nearby. You will have to install the battery holder against the back wall to avoid interfering with the right-hand display and the mbed will have to be directly soldered. I have not found a socket with a low enough profile to fit in the space provided (depth of enclosure is limited by the space behind the center console). Also, I recommend keeping as much lead as possible on the Zener diode (bending it as shown to clear the back wall). Although it is operating well within parameters, the Zener gets quite hot during extended operation and the leads help dissipate the heat and keep it away from the PCB and other components.

/media/uploads/TickTock/pcbtop.jpg /media/uploads/TickTock/pcbbot.jpg

Once the PCB is populated, solder the LCDs to the PCB. CS0 connects to the right display and CS1 connects to the left. /media/uploads/TickTock/brddis.jpg

3) Testing

1)First step is to buzz out all connections from the LCDs to the pins in the main board
2)Next check the touch screen connections. On the main board, place an Ohm meter across X+ and X-. You should read 700 Ohms. Repeat for Y+ and Y-. Then test the resistance from X+ to Y+. With nothing touching the screens, it should read >100K Ohms and <1K when touching either screen.
3)When all connections are checked, solder in the mbed. Download and install the touch2 program http://mbed.org/users/TickTock/code/touch2/ to test the basic operation of the mbed and touch screens.
tips:
Touch screen is sensitive - excess flux on X+,X-,Y+,Y- connection on mbed can result in flakey operation
If touch is not working, double-check the LCD0_CS and LCD1_CS are not swapped. LCD0_CS must connect to the CS of the LCD that has X- & Y- connected to the mbed. LCD1_CS must connect to the CS of the LCD that has X+ & Y+ connected to the mbed.
4)Once touch2 works, it is time to connect to the OBD connector. I highly recommend double checking all connections from the OBD to the PCB with the cable in place before connecting to the Leaf. Buzz out all the pins in the OBS to make sure none are shorting to each other, Check that the 12V goes to the Zener (and nothing else) and the switched 12V to the resistor divider (and nothing else). Test the ground connection properly connects to ground and nothing else.
5)Once you are confident there are no shorts or wrong connections from the OBD connector, take a deep breath and plug it into your leaf. Touch2 program should come up and function. Unplug and install the latest CANary firmware. Test all features before installing into the enclosure (gids, cellpair, menu system, logging) since installing and removing from the enclosure is a PITA.

/media/uploads/TickTock/pcbdone.jpg /media/uploads/TickTock/functioning.jpg

4) Enclosure

The 3D printer leaves a lot of powder behind - I used a strong spray of water to get it out of all the cracks. The enclosure comes with a rather rough finish. I recommend convincing yourself you like it, then simply lightly sand then paint before assembly. Sanding is very difficult - the nylon is very nicely fused and doesn't want to sand. I tried sandblasting and that didn't work either. I had some limited success with filler and then sanding, but only on the outside - it is too difficult to sand the face.

5) Final Assembly

Committer:
TickTock
Date:
Sun Mar 03 18:06:53 2013 +0000
Revision:
15:a359fecf85ba
Parent:
13:62e0f7f39ff5
Child:
16:2a6ca248e1cb
Added config file (just touch cal values for now)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
TickTock 13:62e0f7f39ff5 1 // main.cpp
TickTock 13:62e0f7f39ff5 2
TickTock 4:8d7759f4fe7a 3 //To Do:
TickTock 12:8e42d7ba8468 4 // * USB device detect
TickTock 12:8e42d7ba8468 5 // * config file on local fs with touchscreen calibration
TickTock 12:8e42d7ba8468 6 // * user programmable message decode
TickTock 12:8e42d7ba8468 7 // * brake trainer
TickTock 12:8e42d7ba8468 8 // * write and read the Mode Data
TickTock 12:8e42d7ba8468 9 // * Date entry config screen (keypad)
TickTock 12:8e42d7ba8468 10 // * auto-poll option for cellpair data
TickTock 12:8e42d7ba8468 11 // * cellpair histogram
TickTock 12:8e42d7ba8468 12 // *
TickTock 13:62e0f7f39ff5 13
TickTock 12:8e42d7ba8468 14 #include "mbed.h"
TickTock 12:8e42d7ba8468 15 #include "CAN.h"
TickTock 12:8e42d7ba8468 16 #include "beep.h"
TickTock 12:8e42d7ba8468 17 #include "MSCFileSystem.h"
TickTock 12:8e42d7ba8468 18 #include "PowerControl.h"
TickTock 12:8e42d7ba8468 19 #include "EthernetPowerControl.h"
TickTock 12:8e42d7ba8468 20 #include "utility.h"
TickTock 12:8e42d7ba8468 21 #include "displayModes.h"
TickTock 4:8d7759f4fe7a 22
TickTock 13:62e0f7f39ff5 23 LocalFileSystem local("local");
TickTock 13:62e0f7f39ff5 24
TickTock 13:62e0f7f39ff5 25 // to write to USB Flash Drives, or equivalent (SD card in Reader/Writer)
TickTock 13:62e0f7f39ff5 26 MSCFileSystem fs("fs"); // to write to a USB Flash Drive
TickTock 13:62e0f7f39ff5 27
TickTock 13:62e0f7f39ff5 28 time_t seconds ;
TickTock 13:62e0f7f39ff5 29 Beep spkr(p21);
TickTock 13:62e0f7f39ff5 30
TickTock 13:62e0f7f39ff5 31 Ticker ticker;
TickTock 13:62e0f7f39ff5 32 Timer timer;
TickTock 13:62e0f7f39ff5 33
TickTock 13:62e0f7f39ff5 34 DigitalOut led1(LED1);
TickTock 13:62e0f7f39ff5 35 DigitalOut led2(LED2);
TickTock 13:62e0f7f39ff5 36 DigitalOut led3(LED3);
TickTock 13:62e0f7f39ff5 37 DigitalOut led4(LED4);
TickTock 13:62e0f7f39ff5 38
TickTock 13:62e0f7f39ff5 39 PwmOut dled(p24);
TickTock 13:62e0f7f39ff5 40
TickTock 13:62e0f7f39ff5 41 InterruptIn touchpad(p17);
TickTock 13:62e0f7f39ff5 42 CAN can1(p9, p10); // CAN1 (EV) uses pins 9 and 10 (rx, tx) and pin 8 (rs)
TickTock 13:62e0f7f39ff5 43 DigitalOut can1SleepMode(p8); // Use pin 8 to control the sleep mode of can2
TickTock 13:62e0f7f39ff5 44 CAN can2(p30, p29); // CAN2 (CAR) uses pins 30 and 29 (rx, tx) and pin 28 (rs)
TickTock 13:62e0f7f39ff5 45 DigitalOut can2SleepMode(p28); // Use pin 28 to control the sleep mode of can1
TickTock 13:62e0f7f39ff5 46
TickTock 13:62e0f7f39ff5 47 TOUCH_TFTx2 tt(p16, p17, p19, p20, p11, p12, p13, p6, p7, p5, "TFT"); // x+,x-,y+,y-,mosi, miso, sclk, cs0, cs1, reset
TickTock 13:62e0f7f39ff5 48
TickTock 13:62e0f7f39ff5 49 bool logEn = true,logOpen = false;
TickTock 15:a359fecf85ba 50 FILE *cfile;
TickTock 13:62e0f7f39ff5 51 FILE *file;
TickTock 13:62e0f7f39ff5 52 char fileName[35] = "" ;
TickTock 13:62e0f7f39ff5 53 char writeBuffer[maxBufLen][13]; // buffer for USB write
TickTock 13:62e0f7f39ff5 54 char indexLastMsg[0x800]={0}; // index table for last message
TickTock 13:62e0f7f39ff5 55 CANMessage lastMsg[100]; // table to store last message of eachtype
TickTock 13:62e0f7f39ff5 56 unsigned char battData[256]={0};
TickTock 13:62e0f7f39ff5 57 unsigned char msgChanged[100]; // inidcates which bytes changed
TickTock 13:62e0f7f39ff5 58 char c;
TickTock 13:62e0f7f39ff5 59 volatile int writePointer = 0;
TickTock 13:62e0f7f39ff5 60 volatile int secsNoMsg = 0, secsNoTouch = 0;
TickTock 13:62e0f7f39ff5 61 volatile bool canIdle = false, userIdle = false;
TickTock 13:62e0f7f39ff5 62 bool touched=0; //flag to read touchscreen
TickTock 13:62e0f7f39ff5 63 char counter = 0;
TickTock 13:62e0f7f39ff5 64 unsigned char dMode[2] = {7,2}; //display mode
TickTock 13:62e0f7f39ff5 65 unsigned char sMode = 0; // setup mode
TickTock 13:62e0f7f39ff5 66 unsigned char lastDMode[2] = {0,0}; //last screen mode
TickTock 13:62e0f7f39ff5 67 char displayLog[20][40];
TickTock 13:62e0f7f39ff5 68 unsigned char displayLoc = 0;
TickTock 13:62e0f7f39ff5 69 unsigned char indexOffset = 1;
TickTock 13:62e0f7f39ff5 70 bool showCP = false;
TickTock 13:62e0f7f39ff5 71 bool pollCP = false;
TickTock 13:62e0f7f39ff5 72
TickTock 0:1596b8644523 73 int main() {
TickTock 2:71b1999a8ea5 74 int readPointer=0;
TickTock 4:8d7759f4fe7a 75 char sTemp[40];
TickTock 2:71b1999a8ea5 76 unsigned long secs;
TickTock 7:17bf9ceaf0aa 77 char i,j,display=0;
TickTock 7:17bf9ceaf0aa 78 point lastTouch;
TickTock 7:17bf9ceaf0aa 79
TickTock 8:67eed72f3e10 80 can1.monitor(true); // set to snoop mode
TickTock 8:67eed72f3e10 81 can2.monitor(true); // set to snoop mode
TickTock 2:71b1999a8ea5 82 can1.frequency(500000);
TickTock 2:71b1999a8ea5 83 can2.frequency(500000);
TickTock 7:17bf9ceaf0aa 84 can1SleepMode = 1; // Turn on Monitor_only Mode
TickTock 7:17bf9ceaf0aa 85 can2SleepMode = 1; // Turn on Monitor_only Mode
TickTock 0:1596b8644523 86 can1.attach(&recieve1);
TickTock 0:1596b8644523 87 can2.attach(&recieve2);
TickTock 4:8d7759f4fe7a 88
TickTock 3:3e879b043bc5 89 tt.set_orientation(1);
TickTock 3:3e879b043bc5 90 tt.set_font((unsigned char*) Arial12x12_prop); // select the font
TickTock 4:8d7759f4fe7a 91 tt.set_display(2); // select right display
TickTock 4:8d7759f4fe7a 92 tt.background(Black);
TickTock 3:3e879b043bc5 93 tt.cls();
TickTock 3:3e879b043bc5 94 tt.set_display(0); // select left display
TickTock 15:a359fecf85ba 95 //if(true){ // bypass calibration
TickTock 15:a359fecf85ba 96 // tt.setcal(5570, 34030, 80, 108, 33700, 5780, 82, 108, 32500);
TickTock 15:a359fecf85ba 97 //} else { // calibrate the touch
TickTock 15:a359fecf85ba 98 // tt.calibrate();
TickTock 15:a359fecf85ba 99 //}
TickTock 1:9dcd70c32180 100 tt.claim(stdout); // send stdout to the TFT display
TickTock 12:8e42d7ba8468 101 touchpad.rise(&touch_ISR);
TickTock 4:8d7759f4fe7a 102 tt.wfi(); // enable interrupt on touch
TickTock 7:17bf9ceaf0aa 103 dled = 0.8; // turn on display LED 80%
TickTock 2:71b1999a8ea5 104 timer.start() ;
TickTock 2:71b1999a8ea5 105 RTC_Init(); // start the RTC Interrupts that sync the timer
TickTock 1:9dcd70c32180 106 struct tm t; // pointer to a static tm structure
TickTock 7:17bf9ceaf0aa 107 //NVIC_SetPriority(TIMER3_IRQn, 1); //set ticker priority
TickTock 7:17bf9ceaf0aa 108 //NVIC_SetPriority(CAN_IRQn, 2); //higher than can (so RTC sync works)
TickTock 1:9dcd70c32180 109 seconds = time(NULL);
TickTock 1:9dcd70c32180 110 t = *localtime(&seconds) ;
TickTock 2:71b1999a8ea5 111 strftime(sTemp, 32, "%a %m/%d/%Y %X", &t);
TickTock 3:3e879b043bc5 112 //tt.locate(0,0);
TickTock 3:3e879b043bc5 113 //printf("\nCurrent time : %s\n", sTemp); // DAY MM/DD/YYYY HH:MM:SS
TickTock 1:9dcd70c32180 114
TickTock 1:9dcd70c32180 115 // is it a date before 2012 ?
TickTock 1:9dcd70c32180 116 if ((t.tm_year + 1900) < 2012 ) {
TickTock 1:9dcd70c32180 117 // before 2012, so the RTC probably lost power
TickTock 1:9dcd70c32180 118 // So, set a near-recent date in 2012
TickTock 1:9dcd70c32180 119
TickTock 1:9dcd70c32180 120 // enter people-values here
TickTock 2:71b1999a8ea5 121 t.tm_year = 2013 ; // 28 May 2012
TickTock 2:71b1999a8ea5 122 t.tm_mon = 3 ; // 1 to 12
TickTock 2:71b1999a8ea5 123 t.tm_mday = 5;
TickTock 1:9dcd70c32180 124 t.tm_hour = 12; // 12:59:56 PM (after noon)
TickTock 1:9dcd70c32180 125 t.tm_min = 59;
TickTock 1:9dcd70c32180 126 t.tm_sec = 56;
TickTock 1:9dcd70c32180 127
TickTock 1:9dcd70c32180 128 // adjust for tm structure required values
TickTock 1:9dcd70c32180 129 t.tm_year = t.tm_year - 1900;
TickTock 1:9dcd70c32180 130 t.tm_mon = t.tm_mon - 1;
TickTock 1:9dcd70c32180 131
TickTock 1:9dcd70c32180 132 // set the RTC
TickTock 1:9dcd70c32180 133 set_time(mktime(&t));
TickTock 1:9dcd70c32180 134 seconds = time(NULL);
TickTock 1:9dcd70c32180 135
TickTock 1:9dcd70c32180 136 // printf("Set RTC to:\n" );
TickTock 1:9dcd70c32180 137 // strftime(sTemp, 32, "%a %m/%d/%Y %X", localtime(&seconds));
TickTock 1:9dcd70c32180 138 // printf("%s\n", sTemp); // DAY MM/DD/YYYY HH:MM:SS
TickTock 0:1596b8644523 139 }
TickTock 15:a359fecf85ba 140
TickTock 15:a359fecf85ba 141 // Look for config file
TickTock 15:a359fecf85ba 142 cfile = fopen("/local/config.txt", "r");
TickTock 15:a359fecf85ba 143 if (cfile==NULL){ // if doesn't exist --> create
TickTock 15:a359fecf85ba 144 tt.calibrate();
TickTock 15:a359fecf85ba 145 cfile = fopen("/local/config.txt", "w");
TickTock 15:a359fecf85ba 146 fprintf(cfile,"x0_off %d\r\n",tt.x0_off);
TickTock 15:a359fecf85ba 147 fprintf(cfile,"y0_off %d\r\n",tt.y0_off);
TickTock 15:a359fecf85ba 148 fprintf(cfile,"x0_pp %d\r\n",tt.x0_pp);
TickTock 15:a359fecf85ba 149 fprintf(cfile,"y0_pp %d\r\n",tt.y0_pp);
TickTock 15:a359fecf85ba 150 fprintf(cfile,"x1_off %d\r\n",tt.x1_off);
TickTock 15:a359fecf85ba 151 fprintf(cfile,"y1_off %d\r\n",tt.y1_off);
TickTock 15:a359fecf85ba 152 fprintf(cfile,"x1_pp %d\r\n",tt.x1_pp);
TickTock 15:a359fecf85ba 153 fprintf(cfile,"y1_pp %d\r\n",tt.y1_pp);
TickTock 15:a359fecf85ba 154 fprintf(cfile,"x_mid %d\r\n",tt.x_mid);
TickTock 15:a359fecf85ba 155 } else { // read params
TickTock 15:a359fecf85ba 156 fscanf(cfile, "x0_off %d\r\n", &tt.x0_off ) ;
TickTock 15:a359fecf85ba 157 fscanf(cfile, "y0_off %d\r\n", &tt.y0_off ) ;
TickTock 15:a359fecf85ba 158 fscanf(cfile, "x0_pp %d\r\n", &tt.x0_pp ) ;
TickTock 15:a359fecf85ba 159 fscanf(cfile, "y0_pp %d\r\n", &tt.y0_pp ) ;
TickTock 15:a359fecf85ba 160 fscanf(cfile, "x1_off %d\r\n", &tt.x1_off ) ;
TickTock 15:a359fecf85ba 161 fscanf(cfile, "y1_off %d\r\n", &tt.y1_off ) ;
TickTock 15:a359fecf85ba 162 fscanf(cfile, "x1_pp %d\r\n", &tt.x1_pp ) ;
TickTock 15:a359fecf85ba 163 fscanf(cfile, "y1_pp %d\r\n", &tt.y1_pp ) ;
TickTock 15:a359fecf85ba 164 fscanf(cfile, "x_mid %d\r\n", &tt.x_mid ) ;
TickTock 15:a359fecf85ba 165 }
TickTock 15:a359fecf85ba 166 fclose(cfile);
TickTock 15:a359fecf85ba 167
TickTock 12:8e42d7ba8468 168 //ticker.attach(&tickerISR, 60); //poll cellpair data every minute
TickTock 2:71b1999a8ea5 169 while (true) {
TickTock 4:8d7759f4fe7a 170 if (!logOpen) { // Open new file if one is not already open
TickTock 7:17bf9ceaf0aa 171 if(logEn){ //logging enable
TickTock 7:17bf9ceaf0aa 172 seconds = time(NULL);
TickTock 7:17bf9ceaf0aa 173 t = *localtime(&seconds) ;
TickTock 7:17bf9ceaf0aa 174 strftime(fileName, 32, "/fs/%m%d%H%M.alc", &t); //mmddhhmm.alc
TickTock 7:17bf9ceaf0aa 175 sprintf(sTemp,"Using file %s\n",fileName);
TickTock 4:8d7759f4fe7a 176 logMsg(sTemp);
TickTock 7:17bf9ceaf0aa 177 file = fopen(fileName, "ab");
TickTock 7:17bf9ceaf0aa 178
TickTock 7:17bf9ceaf0aa 179 if(file==NULL){
TickTock 7:17bf9ceaf0aa 180 sprintf(sTemp,"\nUnable to open %s\n\n\n\n",fileName);
TickTock 7:17bf9ceaf0aa 181 logMsg(sTemp);
TickTock 7:17bf9ceaf0aa 182 logEn=false;
TickTock 7:17bf9ceaf0aa 183 spkr.beep(1000,0.2);
TickTock 7:17bf9ceaf0aa 184 } else {
TickTock 7:17bf9ceaf0aa 185 logOpen = true;
TickTock 7:17bf9ceaf0aa 186 readPointer=writePointer;
TickTock 7:17bf9ceaf0aa 187 sprintf(sTemp,"Starting Can Log %s\n",fileName);
TickTock 7:17bf9ceaf0aa 188 logMsg(sTemp);
TickTock 7:17bf9ceaf0aa 189 logTS();
TickTock 7:17bf9ceaf0aa 190 spkr.beep(2000,0.2);
TickTock 7:17bf9ceaf0aa 191 }
TickTock 7:17bf9ceaf0aa 192 }//logging enabled
TickTock 15:a359fecf85ba 193 } else { // if (logOpen)
TickTock 7:17bf9ceaf0aa 194 if (((writePointer+maxBufLen-readPointer)%maxBufLen)>(maxBufLen/16)||canIdle) {
TickTock 7:17bf9ceaf0aa 195 // Dump buffer if > 1/16 full or canbus has stopped
TickTock 7:17bf9ceaf0aa 196 if (file == NULL) {
TickTock 7:17bf9ceaf0aa 197 logOpen = false;
TickTock 7:17bf9ceaf0aa 198 sprintf(sTemp,"Failed to append log file.\n\n");
TickTock 7:17bf9ceaf0aa 199 spkr.beep(1000,0.2);
TickTock 7:17bf9ceaf0aa 200 logMsg(sTemp);
TickTock 7:17bf9ceaf0aa 201 logEn=false;
TickTock 7:17bf9ceaf0aa 202 } else {
TickTock 7:17bf9ceaf0aa 203 while (readPointer != writePointer) {
TickTock 7:17bf9ceaf0aa 204 for (j = 0; j<13; j++){
TickTock 7:17bf9ceaf0aa 205 fprintf(file,"%c",writeBuffer[readPointer][j]);
TickTock 4:8d7759f4fe7a 206 }
TickTock 7:17bf9ceaf0aa 207 if(++readPointer >= maxBufLen)
TickTock 7:17bf9ceaf0aa 208 readPointer=0;
TickTock 4:8d7759f4fe7a 209 }
TickTock 7:17bf9ceaf0aa 210 led4 = !led4;
TickTock 7:17bf9ceaf0aa 211 }
TickTock 7:17bf9ceaf0aa 212 } // if > 1/16 full, canbus has stopped, or PB1 pressed
TickTock 4:8d7759f4fe7a 213 } // if logOpen
TickTock 4:8d7759f4fe7a 214 if (canIdle&&userIdle) { // canbus idle --> sleep to save power
TickTock 4:8d7759f4fe7a 215 if (logOpen){
TickTock 7:17bf9ceaf0aa 216 fclose(file);
TickTock 7:17bf9ceaf0aa 217 } // if (logOpen)*/
TickTock 4:8d7759f4fe7a 218 sprintf(sTemp,"Putting uC to sleep.\n");
TickTock 4:8d7759f4fe7a 219 logMsg(sTemp);
TickTock 4:8d7759f4fe7a 220 //LPC_RTC->CIIR=0x00; // block RTC interrupts
TickTock 4:8d7759f4fe7a 221 led1=0;
TickTock 4:8d7759f4fe7a 222 led2=0;
TickTock 4:8d7759f4fe7a 223 led3=0;
TickTock 4:8d7759f4fe7a 224 led4=0;
TickTock 4:8d7759f4fe7a 225 dled=0; // turn off display
TickTock 4:8d7759f4fe7a 226 secs = time(NULL); // seconds past 12:00:00 AM 1 Jan 1900
TickTock 4:8d7759f4fe7a 227 while (secsNoMsg>canTimeout && secsNoTouch>userTimeout) {
TickTock 4:8d7759f4fe7a 228 //DeepPowerDown();
TickTock 12:8e42d7ba8468 229 tt.wfi(); //enable touch interrupt
TickTock 7:17bf9ceaf0aa 230 __wfi(); // freeze CPU and wait for interrupt (from canbus or touch)
TickTock 7:17bf9ceaf0aa 231 //Sleep();
TickTock 4:8d7759f4fe7a 232 //DeepPowerDown();
TickTock 4:8d7759f4fe7a 233 }
TickTock 4:8d7759f4fe7a 234 canIdle=secsNoMsg>canTimeout;
TickTock 4:8d7759f4fe7a 235 userIdle=userIdle>userTimeout;
TickTock 7:17bf9ceaf0aa 236 dled=0.8; // turn on display LED
TickTock 4:8d7759f4fe7a 237 sprintf(sTemp,"Waking uC.\n");
TickTock 4:8d7759f4fe7a 238 logMsg(sTemp);
TickTock 4:8d7759f4fe7a 239 if (time(NULL)>(secs+1800)) {
TickTock 4:8d7759f4fe7a 240 logOpen = false; // Start new file if asleep for more than 30 minutes
TickTock 4:8d7759f4fe7a 241 if (secsNoTouch>100) secsNoTouch = 100; // also mostly reset user Idle counter
TickTock 7:17bf9ceaf0aa 242 } else if (false){ // insert timestamp on each wake if logging enabled (disabled for now)
TickTock 7:17bf9ceaf0aa 243 file = fopen(fileName, "ab");
TickTock 4:8d7759f4fe7a 244 logTS();
TickTock 4:8d7759f4fe7a 245 }
TickTock 4:8d7759f4fe7a 246 } // if idle
TickTock 4:8d7759f4fe7a 247
TickTock 15:a359fecf85ba 248 if(touched){ // call touchscreen procedure if touch interrupt detected
TickTock 7:17bf9ceaf0aa 249 lastTouch = tt.get_touch();
TickTock 7:17bf9ceaf0aa 250 lastTouch = tt.to_pixel(lastTouch); // convert to pixel pos
TickTock 12:8e42d7ba8468 251 touched = false; // clear interrupt flag
TickTock 7:17bf9ceaf0aa 252 }
TickTock 15:a359fecf85ba 253
TickTock 4:8d7759f4fe7a 254 if (!userIdle) {
TickTock 4:8d7759f4fe7a 255 if (secsNoTouch<2) {// Recently touched
TickTock 4:8d7759f4fe7a 256 secsNoTouch +=2; // increment to prevent double touch
TickTock 4:8d7759f4fe7a 257 if (lastTouch.x>320){
TickTock 4:8d7759f4fe7a 258 i=1;
TickTock 4:8d7759f4fe7a 259 lastTouch.x-=320;
TickTock 4:8d7759f4fe7a 260 } else {
TickTock 4:8d7759f4fe7a 261 i=0;
TickTock 4:8d7759f4fe7a 262 }
TickTock 7:17bf9ceaf0aa 263 if (lastTouch.y>btn11y1 && lastTouch.y<btn11y2) {
TickTock 5:ebf6fa994b78 264 if(sMode==1){
TickTock 5:ebf6fa994b78 265 if (lastTouch.x>btn31x1 && lastTouch.x<btn31x2) {
TickTock 12:8e42d7ba8468 266 dMode[i]=dMode[i]>0?dMode[i]-1:maxScreens;
TickTock 5:ebf6fa994b78 267 } else if (lastTouch.x>btn32x1 && lastTouch.x<btn32x2) {
TickTock 5:ebf6fa994b78 268 secsNoTouch = userTimeout; // immediately exit config mode
TickTock 5:ebf6fa994b78 269 } else if (lastTouch.x>btn33x1 && lastTouch.x<btn33x2) {
TickTock 12:8e42d7ba8468 270 dMode[i]=dMode[i]<maxScreens?dMode[i]+1:0;
TickTock 5:ebf6fa994b78 271 }
TickTock 5:ebf6fa994b78 272 } else sMode=1;
TickTock 5:ebf6fa994b78 273 } else {
TickTock 12:8e42d7ba8468 274 if (dMode[i]==monitorScreen||dMode[i]==changedScreen) {
TickTock 7:17bf9ceaf0aa 275 if (lastTouch.x>btn31x1 && lastTouch.x<btn31x2) {
TickTock 5:ebf6fa994b78 276 indexOffset=indexOffset>4?indexOffset-4:1;
TickTock 7:17bf9ceaf0aa 277 } else if (lastTouch.x>btn32x1 && lastTouch.x<btn32x2) {
TickTock 7:17bf9ceaf0aa 278 for(j=0;j<100;j++) msgChanged[j]=0; // clear changed data
TickTock 7:17bf9ceaf0aa 279 lastDMode[i]=99;//force refresh
TickTock 7:17bf9ceaf0aa 280 } else if (lastTouch.x>btn33x1 && lastTouch.x<btn33x2) {
TickTock 5:ebf6fa994b78 281 indexOffset=indexOffset<77?indexOffset+4:80;
TickTock 7:17bf9ceaf0aa 282 }
TickTock 12:8e42d7ba8468 283 } else if (dMode[i]==cpScreen) {
TickTock 8:67eed72f3e10 284 if (lastTouch.x>btn32x1 && lastTouch.x<btn32x2){
TickTock 12:8e42d7ba8468 285 pollCP=true;
TickTock 8:67eed72f3e10 286 }
TickTock 2:71b1999a8ea5 287 }
TickTock 8:67eed72f3e10 288 } //top of screen
TickTock 4:8d7759f4fe7a 289 }
TickTock 4:8d7759f4fe7a 290 } else { // userIdle
TickTock 8:67eed72f3e10 291 if(sMode==1){
TickTock 8:67eed72f3e10 292 sMode=0;
TickTock 8:67eed72f3e10 293 lastDMode[0]=99;
TickTock 8:67eed72f3e10 294 lastDMode[1]=99;
TickTock 8:67eed72f3e10 295 }
TickTock 4:8d7759f4fe7a 296 }
TickTock 15:a359fecf85ba 297
TickTock 15:a359fecf85ba 298 if(pollCP){ // We do this inside main loop instead of ticker so CAN RX will not be blocked
TickTock 12:8e42d7ba8468 299 sendCPreq(); // send cellpair data request.
TickTock 12:8e42d7ba8468 300 wait_ms(16);
TickTock 12:8e42d7ba8468 301 sendTreq(); //send temperature request
TickTock 12:8e42d7ba8468 302 wait_ms(16);
TickTock 12:8e42d7ba8468 303 pollCP=false;
TickTock 12:8e42d7ba8468 304 showCP=true;
TickTock 12:8e42d7ba8468 305 }
TickTock 15:a359fecf85ba 306
TickTock 7:17bf9ceaf0aa 307 display=display<1?display+1:0; // toggle display
TickTock 7:17bf9ceaf0aa 308 updateDisplay(display);
TickTock 2:71b1999a8ea5 309 } //while (true)
TickTock 0:1596b8644523 310 }