Diff: commandset.h

Revision:

0:8ad47e2b6f00

Child:

21:bc8c1cec3da6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/commandset.h	Sat Jan 30 13:00:39 2016 +0000
@@ -0,0 +1,60 @@
+//e. procedures, which are used in el_gld.asm //r. ïðîöåäóðû, èñïîëüçóåìûå â el_gld.asm
+#ifndef COMMANDSET
+#define COMMANDSET
+
+#include  "stdint.h"
+	
+		//e. ===== command codes, received from a line ========== //r. ===== êîäû êîìàíä, ïðèíèìàåìûõ ñ ëèíèè ==========
+#define  COMMAND_PREFIX	  0xCC			//e. attribute of command  //r. ïðèçíàê êîìàíäû
+#define  BROADCAST_ADDRESS 0x1f  		//e. the broadcasting address ( shared for 3 GLD ) //r. øèðîêîâåùàòåëüíûé àäðåñ (îáùèé äëÿ 3-õ ÃËÄ)
+
+
+#define  CMD_DELTA_PS    	0xa000          //e. the code of the B_DeltaPS command //r. êîä êîìàíäû B_DeltaPS
+#define  CMD_DELTA_BINS  	0xb000          //e. the code of the B_DeltaBINS command //r. êîä êîìàíäû B_DeltaBINS
+#define  CMD_DELTA_SF	  	0xb200          //e. the code of the B_DeltaSF command //r. êîä êîìàíäû B_DeltaSF
+#define  CMD_DEV_MODE    	0xA500          //e. the code of the Device_Mode command //r. êîä êîìàíäû Device_Mode
+#define  CMD_BIT_MODE    	0xA700          //e. the code of the B.I.T. command //r. êîä êîìàíäû B.I.T.(âñòîðîåííîãî òåñòèðîâàíèÿ)
+#define  CMD_RATE        	0x0000          //e. the code of the Rate command //r. êîä êîìàíäû Rate  
+#define  CMD_DELTA       	0x0f00          //e. the code of the Delta command //r. êîä êîìàíäû Delta
+#define  CMD_D_PERIOD_W  	0xf000          //e. the code of the D_Period_W command //r. êîä êîìàíäû D_Period_W
+       
+#define  CMD_MAINT       	0x9999          //e. the code of the Maintenance mode command //r. êîä êîìàíäû Maintenance mode
+
+#define  SUBCMD_M_STIMUL    0x0a00          //e. the code of the Stimul command //r. êîä êîìàíäû Stimul    
+#define  SUBCMD_M_RESET     0x8000          //e. software device reset(restart) //r. ïðîãðàììíûé ñáðîñ (ðåñòàðò) ïðèáîðà
+#define  SUBCMD_M_CLEAR     0xda00          //e. reset of the register of errors of line 485 //r. î÷èñòêà ðåãèñòðà îøèáîê ëèíèè 485  
+#define  SUBCMD_M_MIRR      0xda01          //e. return previous contents of the receiver buffer //r. âîçâðàò ïðåäûäóùåãî ñîäåðæèìîãî áóôåðà ïðèåìíèêà  
+#define  SUBCMD_M_LDPAR_F   0xda02          //e. load GLD parameters from Flash-memory //r. çàãðóçèòü ïàðàìåòðû ÃËÄ èç ôëýø-ïàìÿòè
+#define  SUBCMD_M_LDPAR_D   0xda03          //e. set GLD parameters by procedure of initialization //r. óñòàíîâèòü ïàðàìåòðû ÃËÄ ïðîöåäóðîé èíèöèàëèçàöèè 
+#define  SUBCMD_M_START     0xda04          //e. switch on the GLD //r. âêëþ÷èòü ÃËÄ          
+#define  SUBCMD_M_STOP      0xda40          //e. switch off the GLD //r. âûêëþ÷èòü ÃËÄ
+#define  SUBCMD_M_PULSE     0xda0a          //e. generation of the light-up pulse //r. ãåíåðàöèÿ èìïóëüñà ïîäæèãà
+                                                                              
+#define  SUBCMD_M_CTL_R     0xd900          //e. reading the control register of the device //r. ÷òåíèå ðåãèñòðà óïðàâëåíèÿ óñòðîéñòâà  
+#define  SUBCMD_M_CTL_M     0xd800          //e. modification of bit of the control register //r. ìîäèôèêàöèÿ áèòà ðåãèñòðà óïðàâëåíèÿ 
+#define  SUBCMD_M_RATE      0xdd00          //e. delivery of a stack of parameters M_Rate (Rate2, Rate3) //r. âûäà÷à íàáîðà ïàðàìåòðîâ M_Rate  (Rate2, Rate3)
+
+#define  SUBCMD_M_TMP_W     0xe000          //e. writing to the AD7714 circuit (temperature sensors) //r. çàïèñü â ñõåìû AD7714 (èçìåðèòåëè òåìïåðàòóðû) 
+#define  SUBCMD_M_TMP_R     0xe100          //e. reading from the AD7714 circuit (temperature sensors) //r. ÷òåíèå èç ñõåì AD7714 (èçìåðèòåëè òåìïåðàòóðû) 
+#define  SUBCMD_M_E5R_W     0xe200          //e. writing to the register of a mode of the Elio5 card //r. çàïèñü â ðåãèñòð ðåæèìà ïëàòû Elio5  
+#define  SUBCMD_M_ADC_R     0xe300          //e. reading data from the ADC of the Elio5 card //r. ÷òåíèå äàííûõ èç ÀÖÏ ïëàòû Elio5
+#define  SUBCMD_M_VIB_W     0xe400          //e. loading of the oscillation period of the dither drive //r. çàãðóçêà ïåðèîäà êîëåáàíèé âèáðîïðèâîäà  
+#define  SUBCMD_M_CNT_R     0xe500          //e. reading data from the counters of the Elio5 card //r. ÷òåíèå äàííûõ èç ñ÷åò÷èêîâ ïëàòû Elio5
+#define  SUBCMD_M_GPH_W     0xe600          //e. loading gain factors of photodetector channels //r. çàãðóçêà êîýôôèöèåíòîâ óñèëåíèÿ êàíàëîâ ôîòîïðèåìíèêà  
+#define  SUBCMD_M_FLG_R     0xe700          //e. reading data from the register of input flags  //r. ÷òåíèå äàííûõ èç ðåãèñòðà âõîäíûõ ôëàãîâ
+#define  SUBCMD_M_PARAM_W   0xe800          //e. writing working parameter to the data memory //r. çàïèñü ðàáî÷åãî ïàðàìåòðà â ïàìÿòü äàííûõ          
+#define  SUBCMD_M_PARAM_R   0xe900          //e. reading working parameter of the GLD from the data memory //r. ÷òåíèå ðàáî÷åãî ïàðàìåòðà GLD èç ïàìÿòè äàííûõ 
+#define  SUBCMD_M_E5RA_W    0xea00          //e. writing in 1st additional (A) register of a mode of the Elio5 card //r. çàïèñü â 1-ûé äîïîëíèòåëüíûé (À) ðåãèñòð ðåæèìà ïëàòû Elio5  
+
+	//e. system global variables //r. ñèñòåìíûå ãëîáàëüíûå ïåðåìåííûå	
+	
+extern	uint32_t	blt_in_test; //e. self-test register //r. ðåãèñòð ñàìîòåñòèðîâàíèÿ
+extern  uint32_t 	BIT_number;
+extern  uint32_t 	Is_BIT;
+
+void decode_CMD(void);
+void GLD_Output(void);
+
+#endif // EL_GLD
+
+