Sophie Dexter
/
Just4Trionic
Just4Trionic - CAN and BDM FLASH programmer for Saab cars
Diff: main.cpp
- Revision:
- 4:682d96ff6d79
- Parent:
- 3:92dae9083c83
- Child:
- 5:1775b4b13232
--- a/main.cpp Tue Jun 07 12:23:28 2011 +0000 +++ b/main.cpp Wed Sep 11 11:55:51 2013 +0000 @@ -28,9 +28,21 @@ ******************************************************************************** +Version 1.4 (07/2013) + +Changes since Verion 1.3 + Progress indication shown as a percentage, slightly slower but more informative + T8 BDM Functionality + +Changes since Verion 1.3 + T7 CAN FLASH algorithm changed to only send 4 Bytes at a time + Slightly slower but more reliable especially with I-Bus connection + +******************************************************************************** + Version 1.3 (06/2011) - Basic T7 CAN support and faster T5 CAN bootloader -Changes since Verion 1.1 +Changes since Verion 1.2 New T7 CAN menu provides some very basic T7 CAN DUMP and FLASH functions T5 CAN uses Mybooty version 2 for 1 Mbps CAN speed Get MyBooty version 2.x from forum.ecuproject.com @@ -116,6 +128,7 @@ #include "can232.h" #include "t5can.h" #include "t7can.h" +#include "t8can.h" // constants #define CMD_BUF_LENGTH 32 ///< command buffer size @@ -127,9 +140,10 @@ uint8_t execute_just4trionic_cmd(); void show_just4trionic_help(); -int main() { +int main() +{ // fast serial speed -// pc.baud(921600); + //pc.baud(921600); pc.baud(115200); // the address of the function to be attached (leds_off) and the interval (0.1 seconds) @@ -144,6 +158,14 @@ while (pc.readable()) rx_char = pc.getc(); +#ifdef DEBUG + printf("*************************\r\n"); + printf("** RUNNING DEBUG BUILD **\r\n"); + printf("*************************\r\n"); +#else + printf("Running... this is a release build.\r\n"); +#endif + show_just4trionic_help(); // main loop @@ -194,7 +216,8 @@ @return command flag (success / failure) */ -uint8_t execute_just4trionic_cmd() { +uint8_t execute_just4trionic_cmd() +{ // uint8_t cmd_length = strlen(cmd_buffer); @@ -215,6 +238,9 @@ case '7': t7_can(); return TERM_OK; + case '8': + t8_can(); + return TERM_OK; case 'h': case 'H': return TERM_OK; @@ -226,13 +252,15 @@ return TERM_ERR; } -void show_just4trionic_help() { +void show_just4trionic_help() +{ printf("Just4Trionic Command Menu\r\n"); printf("=========================\r\n"); printf("b/B - Start BDM interface\r\n"); printf("o/O - Open Lawicel CAN232 type interface\r\n"); printf("5 - Start Trionic5 ECU CAN interface\r\n"); printf("7 - Start Trionic7 ECU CAN interface\r\n"); + printf("8 - Start Trionic8 ECU CAN interface\r\n"); printf("\r\n"); printf("h/H - show this help menu\r\n"); printf("\r\n");