La Suno / Mbed 2 deprecated afero_poc15_180403R

Temporary Connector Reversed Version

Dependencies:   UniGraphic mbed vt100

afero_poc15_180403R , J1 のピン配置を反転させたヴァージョンです。

Color2系を使用するためには以下のピンをジャンパで接続してください。
J1-D7 <-> J1-D0
J1-D6 <-> J1-D1

(調査中) また、こちらでテストした範囲では、
FRDM-KL25Z の V3.3 を、Modulo2 の VCC_3V3 ピンに接続してやる必要がありました。

尚、J1-D1, D0 を使用するために UART を無効にしているため
ログは表示されません。

TFTモジュールについて　
aitendoのTFTモジュールはデフォルトでは8bit bus モードになっています。
/media/uploads/Rhyme/img_2364.jpg

半田のジャンパを変えて、SPIの設定にしてください。
/media/uploads/Rhyme/img_2363.jpg

サーミスタについて
POC1.5 では サーミスタは 25℃の時に抵抗値が 50.0kΩになる502AT-11 が
4.95kΩのプルアップ(実際は10kΩx2の並列)で使用されていました。

今回の試作では抵抗値が 10.0kΩの 103AT-11 が
5.1kΩのプルアップで使用されていますので、係数を合わせるために
SMTC502AT-11 のコンストラクタを　
R0 = 10.0
R1 = 5.1
B = 3435
T0 = 298.15
で呼ぶように変更しました。

edge_sensor/edge_pressure.cpp@1:6c54dc8acf96, 2018-04-24 (annotated)

Committer:
Rhyme
Date:
Tue Apr 24 12:18:10 2018 +0000
Revision:
1:6c54dc8acf96
Parent:
0:0b6732b53bf4 
to adjust with 103AT-11 with 5.1k pull-up, the constructor of 502AT-11 is called with R0=10.0, R1=5.1, B=3435, T0=298.15

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Rhyme 0:0b6732b53bf4 1 #include "mbed.h"
Rhyme 0:0b6732b53bf4 2 #include "edge_sensor.h"
Rhyme 0:0b6732b53bf4 3 #include "edge_time.h"
Rhyme 0:0b6732b53bf4 4 #include "edge_reset_mgr.h"
Rhyme 0:0b6732b53bf4 5 #include "PSE530.h"
Rhyme 0:0b6732b53bf4 6 #include "edge_pressure.h"
Rhyme 0:0b6732b53bf4 7 #include <ILI9341.h>
Rhyme 0:0b6732b53bf4 8 #include "edge_chart.h"
Rhyme 0:0b6732b53bf4 9 // #include "SO1602A.h"
Rhyme 0:0b6732b53bf4 10
Rhyme 0:0b6732b53bf4 11 // extern SO1602A *display ; /* OLED display on I2C */
Rhyme 0:0b6732b53bf4 12 extern ILI9341 *display ;
Rhyme 0:0b6732b53bf4 13
Rhyme 0:0b6732b53bf4 14 #define LOW_THR 0.2
Rhyme 0:0b6732b53bf4 15 #define HIGH_THR 0.3
Rhyme 0:0b6732b53bf4 16 #define MIN_TEMP 12.0
Rhyme 0:0b6732b53bf4 17 #define MAX_TEMP 30.0
Rhyme 0:0b6732b53bf4 18
Rhyme 0:0b6732b53bf4 19 /**
Rhyme 0:0b6732b53bf4 20 * SMC PSE530 pressure sensor
Rhyme 0:0b6732b53bf4 21 * analog output 1.0V - 5.0V
Rhyme 0:0b6732b53bf4 22 * 1.0V : 0
Rhyme 0:0b6732b53bf4 23 * 5.0V : 1MPa
Rhyme 0:0b6732b53bf4 24 * (at 0.6V : -0.1MPa)
Rhyme 0:0b6732b53bf4 25 * Our sensor I/F converts 0-5V to 0-1
Rhyme 0:0b6732b53bf4 26 * So we suppose V = Analog Float Value : Pressure
Rhyme 0:0b6732b53bf4 27 * 0.2 = 0
Rhyme 0:0b6732b53bf4 28 * 1.0 = 1MPa
Rhyme 0:0b6732b53bf4 29 */
Rhyme 0:0b6732b53bf4 30
Rhyme 0:0b6732b53bf4 31 float temp2expected(float temp)
Rhyme 0:0b6732b53bf4 32 {
Rhyme 0:0b6732b53bf4 33 const float coef_A = 0.089 ;
Rhyme 0:0b6732b53bf4 34 const float coef_B = 0.831 ;
Rhyme 0:0b6732b53bf4 35 float pressure ;
Rhyme 0:0b6732b53bf4 36
Rhyme 0:0b6732b53bf4 37 pressure = temp * coef_A + coef_B ;
Rhyme 0:0b6732b53bf4 38 return( pressure ) ;
Rhyme 0:0b6732b53bf4 39 }
Rhyme 0:0b6732b53bf4 40
Rhyme 0:0b6732b53bf4 41 edge_pressure::edge_pressure(PSE530 *pse, DigitalOut *en)
Rhyme 0:0b6732b53bf4 42 {
Rhyme 0:0b6732b53bf4 43 _pse = pse ;
Rhyme 0:0b6732b53bf4 44 _en = en ;
Rhyme 0:0b6732b53bf4 45 _value = 0.0 ;
Rhyme 0:0b6732b53bf4 46 _interval = 30 ;
Rhyme 0:0b6732b53bf4 47 _thr_mode = 0 ;
Rhyme 0:0b6732b53bf4 48 _thr_high = HIGH_THR ;
Rhyme 0:0b6732b53bf4 49 _thr_low = LOW_THR ;
Rhyme 0:0b6732b53bf4 50 }
Rhyme 0:0b6732b53bf4 51
Rhyme 0:0b6732b53bf4 52 edge_pressure::~edge_pressure(void)
Rhyme 0:0b6732b53bf4 53 {
Rhyme 0:0b6732b53bf4 54 if (_pse) {
Rhyme 0:0b6732b53bf4 55 delete _pse ;
Rhyme 0:0b6732b53bf4 56 }
Rhyme 0:0b6732b53bf4 57 _value = 0.0 ;
Rhyme 0:0b6732b53bf4 58 }
Rhyme 0:0b6732b53bf4 59
Rhyme 0:0b6732b53bf4 60 float edge_pressure::get_value(void)
Rhyme 0:0b6732b53bf4 61 {
Rhyme 0:0b6732b53bf4 62 float value = 0.0 ;
Rhyme 0:0b6732b53bf4 63 value = _pse->getPressure() ;
Rhyme 0:0b6732b53bf4 64 return( value ) ;
Rhyme 0:0b6732b53bf4 65 }
Rhyme 0:0b6732b53bf4 66
Rhyme 0:0b6732b53bf4 67 void edge_pressure::reset(void)
Rhyme 0:0b6732b53bf4 68 {
Rhyme 0:0b6732b53bf4 69 _value = 0.0 ;
Rhyme 0:0b6732b53bf4 70 _sampled_time = 0 ;
Rhyme 0:0b6732b53bf4 71 }
Rhyme 0:0b6732b53bf4 72
Rhyme 0:0b6732b53bf4 73 void edge_pressure::prepare(void)
Rhyme 0:0b6732b53bf4 74 {
Rhyme 0:0b6732b53bf4 75 }
Rhyme 0:0b6732b53bf4 76
Rhyme 0:0b6732b53bf4 77 int edge_pressure::sample(void)
Rhyme 0:0b6732b53bf4 78 {
Rhyme 0:0b6732b53bf4 79 int result = 0 ;
Rhyme 0:0b6732b53bf4 80 *_en = 1 ; /* enable pressure sensor */
Rhyme 0:0b6732b53bf4 81 wait_ms(30) ;
Rhyme 0:0b6732b53bf4 82 _value = get_value() ;
Rhyme 0:0b6732b53bf4 83 _sampled_time = edge_time ;
Rhyme 0:0b6732b53bf4 84 *_en = 0 ; /* disable pressure sensor */
Rhyme 0:0b6732b53bf4 85 wait_ms(10) ; /* to avoid power transition effect remaining */
Rhyme 0:0b6732b53bf4 86 return( result ) ; /* this always success */
Rhyme 0:0b6732b53bf4 87 }
Rhyme 0:0b6732b53bf4 88
Rhyme 0:0b6732b53bf4 89 void edge_pressure::set_thr_high(int16_t thr_high)
Rhyme 0:0b6732b53bf4 90 {
Rhyme 0:0b6732b53bf4 91 switch(_thr_mode) {
Rhyme 0:0b6732b53bf4 92 case 0: /* absolute value */
Rhyme 0:0b6732b53bf4 93 _thr_high = (float)thr_high/100.0 ;
Rhyme 0:0b6732b53bf4 94 break ;
Rhyme 0:0b6732b53bf4 95 case 1: /* persentage */
Rhyme 0:0b6732b53bf4 96 _thr_high = (float)(thr_high/100.0) ;
Rhyme 0:0b6732b53bf4 97 break ;
Rhyme 0:0b6732b53bf4 98 default:
Rhyme 0:0b6732b53bf4 99 printf("Unknown Threshold mode %d\n", _thr_mode) ;
Rhyme 0:0b6732b53bf4 100 _thr_high = (float)thr_high/100.0 ;
Rhyme 0:0b6732b53bf4 101 break ;
Rhyme 0:0b6732b53bf4 102 }
Rhyme 0:0b6732b53bf4 103 // printf("thr_high = %.3f\n", _thr_high) ;
Rhyme 0:0b6732b53bf4 104 }
Rhyme 0:0b6732b53bf4 105
Rhyme 0:0b6732b53bf4 106 float edge_pressure::get_thr_high(float expected)
Rhyme 0:0b6732b53bf4 107 {
Rhyme 0:0b6732b53bf4 108 float thr_high ;
Rhyme 0:0b6732b53bf4 109
Rhyme 0:0b6732b53bf4 110 switch(_thr_mode) {
Rhyme 0:0b6732b53bf4 111 case 0: /* absolute value */
Rhyme 0:0b6732b53bf4 112 thr_high = expected + _thr_high ;
Rhyme 0:0b6732b53bf4 113 break ;
Rhyme 0:0b6732b53bf4 114 case 1: /* persentage */
Rhyme 0:0b6732b53bf4 115 thr_high = expected * (1.0 + _thr_high) ;
Rhyme 0:0b6732b53bf4 116 break ;
Rhyme 0:0b6732b53bf4 117 default:
Rhyme 0:0b6732b53bf4 118 printf("Unknown Threshold mode %d\n", _thr_mode) ;
Rhyme 0:0b6732b53bf4 119 thr_high = expected + _thr_high ; /* use this as default */
Rhyme 0:0b6732b53bf4 120 break ;
Rhyme 0:0b6732b53bf4 121 }
Rhyme 0:0b6732b53bf4 122 return (thr_high) ;
Rhyme 0:0b6732b53bf4 123 }
Rhyme 0:0b6732b53bf4 124
Rhyme 0:0b6732b53bf4 125 void edge_pressure::set_thr_low(int16_t thr_low)
Rhyme 0:0b6732b53bf4 126 {
Rhyme 0:0b6732b53bf4 127 switch(_thr_mode) {
Rhyme 0:0b6732b53bf4 128 case 0: /* absolute value */
Rhyme 0:0b6732b53bf4 129 _thr_low = (float)thr_low/100.0 ;
Rhyme 0:0b6732b53bf4 130 break ;
Rhyme 0:0b6732b53bf4 131 case 1: /* persentage */
Rhyme 0:0b6732b53bf4 132 _thr_low = (float)(thr_low/100.0) ;
Rhyme 0:0b6732b53bf4 133 break ;
Rhyme 0:0b6732b53bf4 134 default:
Rhyme 0:0b6732b53bf4 135 printf("Unknown Threshold mode %d\n", _thr_mode) ;
Rhyme 0:0b6732b53bf4 136 _thr_low = (float)thr_low/100.0 ;
Rhyme 0:0b6732b53bf4 137 break ;
Rhyme 0:0b6732b53bf4 138 }
Rhyme 0:0b6732b53bf4 139 //printf("thr_low = %.3f\n", _thr_low) ;
Rhyme 0:0b6732b53bf4 140 }
Rhyme 0:0b6732b53bf4 141
Rhyme 0:0b6732b53bf4 142 float edge_pressure::get_thr_low(float expected)
Rhyme 0:0b6732b53bf4 143 {
Rhyme 0:0b6732b53bf4 144 float thr_low ;
Rhyme 0:0b6732b53bf4 145
Rhyme 0:0b6732b53bf4 146 switch(_thr_mode) {
Rhyme 0:0b6732b53bf4 147 case 0: /* absolute value */
Rhyme 0:0b6732b53bf4 148 thr_low = expected - _thr_low ;
Rhyme 0:0b6732b53bf4 149 break ;
Rhyme 0:0b6732b53bf4 150 case 1: /* persentage */
Rhyme 0:0b6732b53bf4 151 thr_low = expected * (1.0 - _thr_low) ;
Rhyme 0:0b6732b53bf4 152 break ;
Rhyme 0:0b6732b53bf4 153 default:
Rhyme 0:0b6732b53bf4 154 printf("Unknown Threshold mode %d\n", _thr_mode) ;
Rhyme 0:0b6732b53bf4 155 thr_low = expected + _thr_low ; /* use this as default */
Rhyme 0:0b6732b53bf4 156 break ;
Rhyme 0:0b6732b53bf4 157 }
Rhyme 0:0b6732b53bf4 158 return (thr_low) ;
Rhyme 0:0b6732b53bf4 159 }
Rhyme 0:0b6732b53bf4 160
Rhyme 0:0b6732b53bf4 161 int edge_pressure::deliver(void)
Rhyme 0:0b6732b53bf4 162 {
Rhyme 0:0b6732b53bf4 163 char str_buf[32] ;
Rhyme 0:0b6732b53bf4 164 char timestr[16] ;
Rhyme 0:0b6732b53bf4 165 int result ;
Rhyme 0:0b6732b53bf4 166
Rhyme 0:0b6732b53bf4 167 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 168 print_time(_sampled_time) ;
Rhyme 0:0b6732b53bf4 169 if (current_temp != 0) {
Rhyme 0:0b6732b53bf4 170 sprintf(str_buf, "GAS: %.3f kgf/cm2 @ %.1fC", _value, *current_temp ) ;
Rhyme 0:0b6732b53bf4 171 } else {
Rhyme 0:0b6732b53bf4 172 sprintf(str_buf, "GAS: %.3f kgf/cm2", _value ) ;
Rhyme 0:0b6732b53bf4 173 }
Rhyme 0:0b6732b53bf4 174 printf(" ") ;
Rhyme 0:0b6732b53bf4 175 printf(str_buf) ;
Rhyme 0:0b6732b53bf4 176
Rhyme 0:0b6732b53bf4 177 if (current_temp != 0) {
Rhyme 0:0b6732b53bf4 178 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 179 _expected = temp2expected(*current_temp) ;
Rhyme 0:0b6732b53bf4 180 _higher = get_thr_high(_expected) ;
Rhyme 0:0b6732b53bf4 181 _lower = get_thr_low(_expected) ;
Rhyme 0:0b6732b53bf4 182 printf(" (%.3f, %.3f) ", _higher, _lower) ;
Rhyme 0:0b6732b53bf4 183 }
Rhyme 0:0b6732b53bf4 184
Rhyme 0:0b6732b53bf4 185 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 186 printf(" %s\n", str_buf) ;
Rhyme 0:0b6732b53bf4 187 time2seq(_sampled_time, timestr) ;
Rhyme 0:0b6732b53bf4 188 // printf(str_buf) ;
Rhyme 0:0b6732b53bf4 189 // printf("\n") ;
Rhyme 0:0b6732b53bf4 190 sprintf(_str_buf,
Rhyme 0:0b6732b53bf4 191 "{\"DEVICE\":\"PRESS\",\"PN\":\"PSE530\",\"VAL\":\"%.3f\",\"UNIT\":\"kgf/cm2\",\"T\":\"%s\",\"E\":\"%d\"}",
Rhyme 0:0b6732b53bf4 192 _value, timestr, _error_count) ;
Rhyme 0:0b6732b53bf4 193 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 194 result = afero->setAttribute(1, _str_buf) ;
Rhyme 0:0b6732b53bf4 195 return( result == afSUCCESS ) ;
Rhyme 0:0b6732b53bf4 196 }
Rhyme 0:0b6732b53bf4 197
Rhyme 0:0b6732b53bf4 198 int v2x(float value)
Rhyme 0:0b6732b53bf4 199 {
Rhyme 0:0b6732b53bf4 200 int result ;
Rhyme 0:0b6732b53bf4 201 if (value < 0) {
Rhyme 0:0b6732b53bf4 202 result = 20 ;
Rhyme 0:0b6732b53bf4 203 } else if (value > 4) {
Rhyme 0:0b6732b53bf4 204 result = 300 ;
Rhyme 0:0b6732b53bf4 205 } else {
Rhyme 0:0b6732b53bf4 206 result = 20 + (int)(70 * value + 0.5) ;
Rhyme 0:0b6732b53bf4 207 }
Rhyme 0:0b6732b53bf4 208 return( result ) ;
Rhyme 0:0b6732b53bf4 209 }
Rhyme 0:0b6732b53bf4 210
Rhyme 0:0b6732b53bf4 211 int press_v2y(float value, edge_chart_type *p)
Rhyme 0:0b6732b53bf4 212 {
Rhyme 0:0b6732b53bf4 213 int y ;
Rhyme 0:0b6732b53bf4 214 if (value < p->min) {
Rhyme 0:0b6732b53bf4 215 value = p->min ;
Rhyme 0:0b6732b53bf4 216 } else if (value > p->max) {
Rhyme 0:0b6732b53bf4 217 value = p->max ;
Rhyme 0:0b6732b53bf4 218 }
Rhyme 0:0b6732b53bf4 219 y = p->top + p->height - 2
Rhyme 0:0b6732b53bf4 220 - (int)((p->height - 2) * ((value - p->min) /(p->max - p->min))) ;
Rhyme 0:0b6732b53bf4 221 return( y ) ;
Rhyme 0:0b6732b53bf4 222 }
Rhyme 0:0b6732b53bf4 223
Rhyme 0:0b6732b53bf4 224 /**
Rhyme 0:0b6732b53bf4 225 * drawPointer
Rhyme 0:0b6732b53bf4 226 *
Rhyme 0:0b6732b53bf4 227 * draw a triangle pointer at value place
Rhyme 0:0b6732b53bf4 228 * in GAS pressure display mode
Rhyme 0:0b6732b53bf4 229 */
Rhyme 0:0b6732b53bf4 230 void edge_pressure::drawPointer(int c)
Rhyme 0:0b6732b53bf4 231 {
Rhyme 0:0b6732b53bf4 232 float delta_x ;
Rhyme 0:0b6732b53bf4 233 int x[2], y, i ;
Rhyme 0:0b6732b53bf4 234 const int top = 75 ;
Rhyme 0:0b6732b53bf4 235 const int pointer_height = 15 ;
Rhyme 0:0b6732b53bf4 236 for (i = 0 ; i < pointer_height ; i++ ) {
Rhyme 0:0b6732b53bf4 237 y = top + i ;
Rhyme 0:0b6732b53bf4 238 delta_x = i * 5.0 / 8.0 ;
Rhyme 0:0b6732b53bf4 239 x[0] = c - delta_x ;
Rhyme 0:0b6732b53bf4 240 x[1] = c + delta_x ;
Rhyme 0:0b6732b53bf4 241 display->line(x[0], y, x[1], y, White) ;
Rhyme 0:0b6732b53bf4 242 }
Rhyme 0:0b6732b53bf4 243 }
Rhyme 0:0b6732b53bf4 244
Rhyme 0:0b6732b53bf4 245 void edge_pressure::show(void)
Rhyme 0:0b6732b53bf4 246 {
Rhyme 0:0b6732b53bf4 247 edge_chart_type *p = &edge_chart[ _id ] ;
Rhyme 0:0b6732b53bf4 248 uint16_t color = White ;
Rhyme 0:0b6732b53bf4 249 char str_buf[32] ;
Rhyme 0:0b6732b53bf4 250 int i, x, y, l, r, c, str_x ;
Rhyme 0:0b6732b53bf4 251 if (display) {
Rhyme 0:0b6732b53bf4 252 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 253 /* for debug */
Rhyme 0:0b6732b53bf4 254 // _value = _lower - 0.5 ; /* LOW */
Rhyme 0:0b6732b53bf4 255 // _value = (_higher + _lower) / 2 ; /* GOOD */
Rhyme 0:0b6732b53bf4 256 // _value = _higher + 0.2 ; /* HIGH */
Rhyme 0:0b6732b53bf4 257
Rhyme 0:0b6732b53bf4 258 if (_value > _higher) {
Rhyme 0:0b6732b53bf4 259 sprintf(str_buf, "HIGH") ;
Rhyme 0:0b6732b53bf4 260 color = Red ;
Rhyme 0:0b6732b53bf4 261 str_x = 60 ;
Rhyme 0:0b6732b53bf4 262 } else if (_value < _lower) {
Rhyme 0:0b6732b53bf4 263 sprintf(str_buf, "LOW") ;
Rhyme 0:0b6732b53bf4 264 color = Yellow ;
Rhyme 0:0b6732b53bf4 265 str_x = 60 ;
Rhyme 0:0b6732b53bf4 266 } else {
Rhyme 0:0b6732b53bf4 267 sprintf(str_buf, "GOOD") ;
Rhyme 0:0b6732b53bf4 268 color = Green ;
Rhyme 0:0b6732b53bf4 269 str_x = 35 ;
Rhyme 0:0b6732b53bf4 270 }
Rhyme 0:0b6732b53bf4 271 switch(display_mode) {
Rhyme 0:0b6732b53bf4 272 case DISPLAY_MODE_GAS:
Rhyme 0:0b6732b53bf4 273 display->BusEnable(true) ;
Rhyme 0:0b6732b53bf4 274 display->cls() ;
Rhyme 0:0b6732b53bf4 275 /* printf frame */
Rhyme 0:0b6732b53bf4 276 display->foreground(White) ;
Rhyme 0:0b6732b53bf4 277 display->line(20, 75, 300, 75, White) ;
Rhyme 0:0b6732b53bf4 278 for (i = 0 ; i <= 8 ; i++ ) {
Rhyme 0:0b6732b53bf4 279 x = 20 + i * 35 ;
Rhyme 0:0b6732b53bf4 280 if (i & 0x01) { /* odd */
Rhyme 0:0b6732b53bf4 281 display->line(x, 55, x, 95, White) ;
Rhyme 0:0b6732b53bf4 282 } else { /* even */
Rhyme 0:0b6732b53bf4 283 display->line(x, 45, x, 105, White) ;
Rhyme 0:0b6732b53bf4 284 }
Rhyme 0:0b6732b53bf4 285 }
Rhyme 0:0b6732b53bf4 286 display->set_font((unsigned char*) Arial28x28);
Rhyme 0:0b6732b53bf4 287 for (i = 0 ; i <= 4 ; i++ ) {
Rhyme 0:0b6732b53bf4 288 x = 12 + i * 70 ;
Rhyme 0:0b6732b53bf4 289 display->locate(x, 10) ;
Rhyme 0:0b6732b53bf4 290 display->printf("%d", i) ;
Rhyme 0:0b6732b53bf4 291 }
Rhyme 0:0b6732b53bf4 292 /* print expected area and current pressure */
Rhyme 0:0b6732b53bf4 293 l = v2x(_lower) ;
Rhyme 0:0b6732b53bf4 294 r = v2x(_higher) ;
Rhyme 0:0b6732b53bf4 295 c = v2x(_value) ;
Rhyme 0:0b6732b53bf4 296 // display->fillrect(l, 70, r, 80, Red) ;
Rhyme 0:0b6732b53bf4 297 display->fillrect(l, 65, r, 74, Red) ;
Rhyme 0:0b6732b53bf4 298 // display->fillcircle(c, 75, 10, White) ;
Rhyme 0:0b6732b53bf4 299 drawPointer(c) ;
Rhyme 0:0b6732b53bf4 300
Rhyme 0:0b6732b53bf4 301 /* print status */
Rhyme 0:0b6732b53bf4 302 display->locate(str_x, 140) ;
Rhyme 0:0b6732b53bf4 303 display->set_font_zoom(3, 3) ;
Rhyme 0:0b6732b53bf4 304 display->foreground(color) ;
Rhyme 0:0b6732b53bf4 305 display->printf(str_buf) ;
Rhyme 0:0b6732b53bf4 306 display->set_font_zoom(1, 1) ;
Rhyme 0:0b6732b53bf4 307 display->BusEnable(false) ;
Rhyme 0:0b6732b53bf4 308 break ;
Rhyme 0:0b6732b53bf4 309 case DISPLAY_MODE_SUMMARY:
Rhyme 0:0b6732b53bf4 310 display->BusEnable(true) ;
Rhyme 0:0b6732b53bf4 311 display->set_font((unsigned char*) Arial12x12);
Rhyme 0:0b6732b53bf4 312 display->set_font_zoom(2, 2) ;
Rhyme 0:0b6732b53bf4 313 display->foreground(White) ;
Rhyme 0:0b6732b53bf4 314 display->locate(10, EDGE_SUMMARY_TIME_Y) ;
Rhyme 0:0b6732b53bf4 315 displayTime(_sampled_time) ;
Rhyme 0:0b6732b53bf4 316 // display->locate(10,50) ;
Rhyme 0:0b6732b53bf4 317 // display->printf(timestr) ;
Rhyme 0:0b6732b53bf4 318 display->locate(10, EDGE_SUMMARY_PRESS_Y) ;
Rhyme 0:0b6732b53bf4 319 display->printf("Press: ") ;
Rhyme 0:0b6732b53bf4 320 display->foreground(color) ;
Rhyme 0:0b6732b53bf4 321 display->locate(90, EDGE_SUMMARY_PRESS_Y) ;
Rhyme 0:0b6732b53bf4 322 display->printf("%.3f ", _value) ;
Rhyme 0:0b6732b53bf4 323 display->foreground(White) ;
Rhyme 0:0b6732b53bf4 324 display->printf("kgf/cm2") ;
Rhyme 0:0b6732b53bf4 325 display->BusEnable(false) ;
Rhyme 0:0b6732b53bf4 326 break ;
Rhyme 0:0b6732b53bf4 327 case DISPLAY_MODE_CHART:
Rhyme 0:0b6732b53bf4 328 x = p->left + p->index + 1;
Rhyme 0:0b6732b53bf4 329 y = press_v2y(_value, p) ;
Rhyme 0:0b6732b53bf4 330 display->BusEnable(true) ;
Rhyme 0:0b6732b53bf4 331 if (p->index == 0) {
Rhyme 0:0b6732b53bf4 332 draw_chart_frame(p) ;
Rhyme 0:0b6732b53bf4 333 }
Rhyme 0:0b6732b53bf4 334 display->foreground(color) ;
Rhyme 0:0b6732b53bf4 335 display->pixel(x, y, color) ;
Rhyme 0:0b6732b53bf4 336 display->set_font((unsigned char*) Arial12x12);
Rhyme 0:0b6732b53bf4 337 display->locate(p->left + 40, p->top + 5) ;
Rhyme 0:0b6732b53bf4 338 display->printf("%5s", str_buf) ;
Rhyme 0:0b6732b53bf4 339 display->foreground(White) ;
Rhyme 0:0b6732b53bf4 340 display->BusEnable(false) ;
Rhyme 0:0b6732b53bf4 341 p->index = (p->index + 1) % (p->width - 2) ;
Rhyme 0:0b6732b53bf4 342 break ;
Rhyme 0:0b6732b53bf4 343 }
Rhyme 0:0b6732b53bf4 344 }
Rhyme 0:0b6732b53bf4 345 reset_watch_dog() ;
Rhyme 0:0b6732b53bf4 346 }