ZigBee Modem Status example for mbed XBeeLib By Digi
Description
This example shows how to register a function callback to be aware of modem status changes. This library will call the registered callback whenever the XBee module radio modem changes its status
See Handling modem status changes chapter for more information.
Common Setup
Make sure you have a valid Example Common Setup
Example Setup
This example does not require any additional setup.
Running the example
Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.
It you set up a network as described in the Common Setup section, you should see following modem status in the debug interface:
- Modem Status 0x0: Corresponds to 'HwReset' meaning 'Hardware reset'
- Modem Status 0x2: Corresponds to 'JoinedNW' meaning 'Joined network (ZigBee routers and end devices)'
Note: You may not see the HwReset modem status if the device is joining to the coordinator fast (within the call to xbee.init())
If you now unplug the network coordinator you should see following modem status in the debug interface:
- Modem Status 0x3: Corresponds to 'Disassociated' meaning 'Disassociated (ZigBee)'
config.h@4:18ca486c0130, 2015-05-14 (annotated)
- Committer:
- hbujanda
- Date:
- Thu May 14 16:24:34 2015 +0200
- Revision:
- 4:18ca486c0130
- Child:
- 5:812eb41298b4
Automatic upload
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
hbujanda | 4:18ca486c0130 | 1 | |
hbujanda | 4:18ca486c0130 | 2 | #if !defined(__CONFIG_H_) |
hbujanda | 4:18ca486c0130 | 3 | #define __CONFIG_H_ |
hbujanda | 4:18ca486c0130 | 4 | |
hbujanda | 4:18ca486c0130 | 5 | /** Library configuration options */ |
hbujanda | 4:18ca486c0130 | 6 | #define ENABLE_LOGGING |
hbujanda | 4:18ca486c0130 | 7 | #define ENABLE_ASSERTIONS |
hbujanda | 4:18ca486c0130 | 8 | #define FRAME_BUFFER_SIZE 4 |
hbujanda | 4:18ca486c0130 | 9 | #define MAX_FRAME_PAYLOAD_LEN 128 |
hbujanda | 4:18ca486c0130 | 10 | #define ENABLE_PM_SUPPORT |
hbujanda | 4:18ca486c0130 | 11 | |
hbujanda | 4:18ca486c0130 | 12 | #define SYNC_OPS_TIMEOUT_MS 2000 |
hbujanda | 4:18ca486c0130 | 13 | |
hbujanda | 4:18ca486c0130 | 14 | //#define RADIO_TX NC /* TODO: specify your setup's Serial TX pin connected to the XBee module DIN pin */ |
hbujanda | 4:18ca486c0130 | 15 | //#define RADIO_RX NC /* TODO: specify your setup's Serial RX pin connected to the XBee module DOUT pin */ |
hbujanda | 4:18ca486c0130 | 16 | //#define RADIO_RTS NC /* TODO: specify your setup's Serial RTS# pin connected to the XBee module RTS# pin */ |
hbujanda | 4:18ca486c0130 | 17 | //#define RADIO_CTS NC /* TODO: specify your setup's Serial CTS# pin connected to the XBee module CTS# pin */ |
hbujanda | 4:18ca486c0130 | 18 | //#define RADIO_RESET NC /* TODO: specify your setup's GPIO (output) connected to the XBee module's reset pin */ |
hbujanda | 4:18ca486c0130 | 19 | //#define RADIO_SLEEP_REQ NC /* TODO: specify your setup's GPIO (output) connected to the XBee module's SLEEP_RQ pin */ |
hbujanda | 4:18ca486c0130 | 20 | //#define RADIO_ON_SLEEP NC /* TODO: specify your setup's GPIO (input) connected to the XBee module's ON_SLEEP pin */ |
hbujanda | 4:18ca486c0130 | 21 | //#define DEBUG_TX NC /* TODO: specify your setup's Serial TX for debugging */ |
hbujanda | 4:18ca486c0130 | 22 | //#define DEBUG_RX NC /* TODO: specify your setup's Serial RX for debugging (optional) */ |
hbujanda | 4:18ca486c0130 | 23 | |
hbujanda | 4:18ca486c0130 | 24 | #if !defined(RADIO_TX) |
hbujanda | 4:18ca486c0130 | 25 | #error "Please define RADIO_TX pin" |
hbujanda | 4:18ca486c0130 | 26 | #endif |
hbujanda | 4:18ca486c0130 | 27 | |
hbujanda | 4:18ca486c0130 | 28 | #if !defined(RADIO_RX) |
hbujanda | 4:18ca486c0130 | 29 | #error "Please define RADIO_RX pin" |
hbujanda | 4:18ca486c0130 | 30 | #endif |
hbujanda | 4:18ca486c0130 | 31 | |
hbujanda | 4:18ca486c0130 | 32 | #if !defined(RADIO_RESET) |
hbujanda | 4:18ca486c0130 | 33 | #define RADIO_RESET NC |
hbujanda | 4:18ca486c0130 | 34 | #warning "RADIO_RESET not defined, defaulted to 'NC'" |
hbujanda | 4:18ca486c0130 | 35 | #endif |
hbujanda | 4:18ca486c0130 | 36 | |
hbujanda | 4:18ca486c0130 | 37 | #if defined(ENABLE_LOGGING) |
hbujanda | 4:18ca486c0130 | 38 | #if !defined(DEBUG_TX) |
hbujanda | 4:18ca486c0130 | 39 | #error "Please define DEBUG_TX" |
hbujanda | 4:18ca486c0130 | 40 | #endif |
hbujanda | 4:18ca486c0130 | 41 | #if !defined(DEBUG_RX) |
hbujanda | 4:18ca486c0130 | 42 | #define DEBUG_RX NC |
hbujanda | 4:18ca486c0130 | 43 | #warning "DEBUG_RX not defined, defaulted to 'NC'" |
hbujanda | 4:18ca486c0130 | 44 | #endif |
hbujanda | 4:18ca486c0130 | 45 | #endif |
hbujanda | 4:18ca486c0130 | 46 | |
hbujanda | 4:18ca486c0130 | 47 | #endif /* __CONFIG_H_ */ |