Avnet_IoT / Mbed OS avnet-client-example

This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.

Fork of mbed-os-example-client by mbed-os-examples

docs/radio_module_identify.md

Committer:
davyu
Date:
2017-10-20
Revision:
110:bed4b048cfd9
Parent:
0:7d5ec759888b

File content as of revision 110:bed4b048cfd9:

## Radio module identification

* Make sure that you are using the same radio modules on both server and client sides:

	* If the radio module on the gateway router supports the 2.4 GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a 2.4 GHz radio module (such as Atmel AT86RF233).

	* If the radio module on the gateway router supports the sub-GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a sub-GHz radio module (such as Atmel AT86RF212B).

* An easy way to identify which frequency band your setup uses is to check the **Antenna size** on the radio module:

	* The sub-GHz band antenna is larger than the 2.4 GHz antenna.

	* For the client side (mbed 6LoWPAN shield connected to an FRDM-K64F board), see the image below:
  ![](img/Radio_Identifications.png) 

	* For the gateway router, see the image below:
  ![](img/Radio_Identifications_GW.png)