CN0391 (Multi-channel Thermocouple)
For additional information check out the mbed page of the Analog Devices wiki: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
main.cpp
- Committer:
- adisuciu
- Date:
- 2016-11-07
- Revision:
- 0:74cd912392c3
File content as of revision 0:74cd912392c3:
/** * @file main.cpp * @brief Main file for the CN0357-example project * @author Analog Devices Inc. * * For support please go to: * Github: https://github.com/analogdevicesinc/mbed-adi * Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers * Product: www.analog.com/EVAL-CN0357-ARDZ * More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all ******************************************************************************** * Copyright 2016(c) Analog Devices, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * - Neither the name of Analog Devices, Inc. nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * - The use of this software may or may not infringe the patent rights * of one or more patent holders. This license does not release you * from the requirement that you obtain separate licenses from these * patent holders to use this software. * - Use of the software either in source or binary form, must be run * on or directly connected to an Analog Devices Inc. component. * * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ********************************************************************************/ #include "mbed.h" #include "Thermocouple.h" #include "CN0391.h" Serial pc(SERIAL_TX, SERIAL_RX); int main() { pc.baud(115200); //Thermocouple *tcarray[4] = {new Thermocouple_Type_E, new Thermocouple_Type_E,new Thermocouple_Type_B,new Thermocouple_Type_B} CN0391 cn0391(D10); pc.printf("Reset the AD7124\r\n"); cn0391.reset(); wait_ms(500); pc.printf("Init the AD7124\r\n"); cn0391.init(); wait_ms(500); pc.printf("Done\r\n"); cn0391.set_thermocouple_type(CN0391::CHANNEL_P1, new Thermocouple_Type_E); cn0391.set_thermocouple_type(CN0391::CHANNEL_P2, new Thermocouple_Type_B); cn0391.set_thermocouple_type(CN0391::CHANNEL_P3, new Thermocouple_Type_J); cn0391.set_thermocouple_type(CN0391::CHANNEL_P4, new Thermocouple_Type_S); pc.printf("Calibration current for channel 1: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P1)); pc.printf("Calibration current for channel 2: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P2)); pc.printf("Calibration current for channel 3: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P3)); pc.printf("Calibration current for channel 4: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P4)); while(1) { pc.printf("Thermocouple temperature channel 1: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P1)); pc.printf("Thermocouple temperature channel 2: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P2)); pc.printf("Thermocouple temperature channel 3: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P3)); pc.printf("Thermocouple temperature channel 4: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P4)); pc.printf("\r\n"); wait_ms(1000); } return 0; }