File content as of revision 3:e38a115af1dd:

//gps.cpp
//for use with Adafruit Ultimate GPS
//Reads in and parses GPS data

#include "mbed.h"
#include "MBed_Adafruit_GPS.h"

Serial * gps_Serial;
Serial pc (USBTX, USBRX);

int main() {
   
   pc.baud(115200); //sets virtual COM serial communication to high rate; this is to allow more time to be spent on GPS retrieval
   
   gps_Serial = new Serial(PTC17,PTC16); //serial object for use w/ GPS
   Adafruit_GPS myGPS(gps_Serial); //object of Adafruit's GPS class
   char c; //when read via Adafruit_GPS::read(), the class returns single character stored here
   Timer refresh_Timer; //sets up a timer for use in loop; how often do we print GPS info?
   const int refresh_Time = 2000; //refresh time in ms
   
   myGPS.begin(9600);  //sets baud rate for GPS communication; note this may be changed via Adafruit_GPS::sendCommand(char *)
                       //a list of GPS commands is available at http://www.adafruit.com/datasheets/PMTK_A08.pdf
   
   myGPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCGGA); //these commands are defined in MBed_Adafruit_GPS.h; a link is provided there for command creation
   myGPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ);
   myGPS.sendCommand(PGCMD_ANTENNA);
   
   pc.printf("Connection established at 115200 baud...\n");
   
   wait(1);
   
   refresh_Timer.start();  //starts the clock on the timer
   
   while(true){
       c = myGPS.read();   //queries the GPS
       
       if (c) { pc.printf("%c", c); } //this line will echo the GPS data if not paused
       
       //check if we recieved a new message from GPS, if so, attempt to parse it,
       if ( myGPS.newNMEAreceived() ) {
           if ( !myGPS.parse(myGPS.lastNMEA()) ) {
               continue;   
           }    
       }
       
       //check if enough time has passed to warrant printing GPS info to screen
       //note if refresh_Time is too low or pc.baud is too low, GPS data may be lost during printing
       if (refresh_Timer.read_ms() >= refresh_Time) {
           refresh_Timer.reset();
           pc.printf("Time: %d:%d:%d.%u\n", myGPS.hour, myGPS.minute, myGPS.seconds, myGPS.milliseconds);
           pc.printf("Date: %d/%d/20%d\n", myGPS.day, myGPS.month, myGPS.year);
           pc.printf("Fix: %d\n", (int) myGPS.fix);
           pc.printf("Quality: %d\n", (int) myGPS.fixquality);
           if (myGPS.fix) {
               pc.printf("Location: %5.2f%c, %5.2f%c\n", myGPS.latitude, myGPS.lat, myGPS.longitude, myGPS.lon);
               pc.printf("Speed: %5.2f knots\n", myGPS.speed);
               pc.printf("Angle: %5.2f\n", myGPS.angle);
               pc.printf("Altitude: %5.2f\n", myGPS.altitude);
               pc.printf("Satellites: %d\n", myGPS.satellites);
           }
       }
   }
}


/*

//gps.cpp
//for use with Adafruit Ultimate GPS
//Reads in and parses GPS data

#include "mbed.h"
#include "MBed_Adafruit_GPS.h"

Serial * gps_Serial;
Serial pc (USBTX, USBRX);

int main() {
   
   pc.baud(115200); //sets virtual COM serial communication to high rate; this is to allow more time to be spent on GPS retrieval
   
   gps_Serial = new Serial(p28,p27); //serial object for use w/ GPS
   Adafruit_GPS myGPS(gps_Serial); //object of Adafruit's GPS class
   char c; //when read via Adafruit_GPS::read(), the class returns single character stored here
   Timer refresh_Timer; //sets up a timer for use in loop; how often do we print GPS info?
   const int refresh_Time = 2000; //refresh time in ms
   
   myGPS.begin(9600);  //sets baud rate for GPS communication; note this may be changed via Adafruit_GPS::sendCommand(char *)
                       //a list of GPS commands is available at http://www.adafruit.com/datasheets/PMTK_A08.pdf
   
   myGPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCGGA); //these commands are defined in MBed_Adafruit_GPS.h; a link is provided there for command creation
   myGPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ);
   myGPS.sendCommand(PGCMD_ANTENNA);
   
   pc.printf("Connection established at 115200 baud...\n");
   
   wait(1);
   
   refresh_Timer.start();  //starts the clock on the timer
   
   while(true){
       c = myGPS.read();   //queries the GPS
       
       if (c) { pc.printf("%c", c); } //this line will echo the GPS data if not paused
       
       //check if we recieved a new message from GPS, if so, attempt to parse it,
       if ( myGPS.newNMEAreceived() ) {
           if ( !myGPS.parse(myGPS.lastNMEA()) ) {
               continue;   
           }    
       }
       
       //check if enough time has passed to warrant printing GPS info to screen
       //note if refresh_Time is too low or pc.baud is too low, GPS data may be lost during printing
       if (refresh_Timer.read_ms() >= refresh_Time) {
           refresh_Timer.reset();
           pc.printf("Time: %d:%d:%d.%u\n", myGPS.hour, myGPS.minute, myGPS.seconds, myGPS.milliseconds);   
           pc.printf("Date: %d/%d/20%d\n", myGPS.day, myGPS.month, myGPS.year);
           pc.printf("Fix: %d\n", (int) myGPS.fix);
           pc.printf("Quality: %d\n", (int) myGPS.fixquality);
           if (myGPS.fix) {
               pc.printf("Location: %5.2f%c, %5.2f%c\n", myGPS.latitude, myGPS.lat, myGPS.longitude, myGPS.lon);
               pc.printf("Speed: %5.2f knots\n", myGPS.speed);
               pc.printf("Angle: %5.2f\n", myGPS.angle);
               pc.printf("Altitude: %5.2f\n", myGPS.altitude);
               pc.printf("Satellites: %d\n", myGPS.satellites);
           }
       }
   }
}
*/


/*

//gps.cpp
//for use with Adafruit Ultimate GPS
//Reads in and parses GPS data
 
#include "mbed.h"
#include "MBed_Adafruit_GPS.h"
 
Serial * gps_Serial;
Serial pct (USBTX, USBRX);

int main() {
    
    pct.baud(115200); //sets virtual COM serial communication to high rate; this is to allow more time to be spent on GPS retrieval
    
    gps_Serial = new Serial(PTC17,PTC16); //serial object for use w/ GPS
    Adafruit_GPS myGPS(gps_Serial); //object of Adafruit's GPS class
    char c; //when read via Adafruit_GPS::read(), the class returns single character stored here
    Timer refresh_Timer; //sets up a timer for use in loop; how often do we print GPS info?
    const int refresh_Time = 2000; //refresh time in ms
    
    myGPS.begin(9600);  //sets baud rate for GPS communication; note this may be changed via Adafruit_GPS::sendCommand(char *)
                        //a list of GPS commands is available at http://www.adafruit.com/datasheets/PMTK_A08.pdf
    
    myGPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCGGA); //these commands are defined in MBed_Adafruit_GPS.h; a link is provided there for command creation
    myGPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ);
    myGPS.sendCommand(PGCMD_ANTENNA);
    
    pct.printf("Connection established at 115200 baud...\n");
    
    wait(1);
    
    refresh_Timer.start();  //starts the clock on the timer
    
    while(true){
        c = myGPS.read();   //queries the GPS
        
        if (c) { pct.printf("%c", c); } //this line will echo the GPS data if not paused
        
        //check if we recieved a new message from GPS, if so, attempt to parse it,
        if ( myGPS.newNMEAreceived() ) {
            if ( !myGPS.parse(myGPS.lastNMEA()) ) {
                continue;   
            }    
        }
        
        //check if enough time has passed to warrant printing GPS info to screen
        //note if refresh_Time is too low or pc.baud is too low, GPS data may be lost during printing
        if (refresh_Timer.read_ms() >= refresh_Time) {
            refresh_Timer.reset();
            pct.printf("Time: %d:%d:%d.%u\n", myGPS.hour, myGPS.minute, myGPS.seconds, myGPS.milliseconds);
            pct.printf("Date: %d/%d/20%d\n", myGPS.day, myGPS.month, myGPS.year);
            pct.printf("Fix: %d\n", (int) myGPS.fix);
            pct.printf("Quality: %d\n", (int) myGPS.fixquality);
            if (myGPS.fix) {
                pct.printf("Location: %5.2f%c, %5.2f%c\n", myGPS.latitude, myGPS.lat, myGPS.longitude, myGPS.lon);
                pct.printf("Speed: %5.2f knots\n", myGPS.speed);
                pct.printf("Angle: %5.2f\n", myGPS.angle);
                pct.printf("Altitude: %5.2f\n", myGPS.altitude);
                pct.printf("Satellites: %d\n", myGPS.satellites);
            }
            
        }
        
    }
    
    
}

*/