Affordable and flexible platform to ease prototyping using a STM32F401RET6 microcontroller.

Flashing and running STM Nucleo board in Linux

23 Aug 2014

1. Install and start (as root from terminal) CuteCom to monitor /dev/ttyACM0 with baudrate settings 9600, 8, 1, No parity. 2. Copy your .bin file to /media/NUCLEO. Now you should see printf output of your sofware and mbed library error messages with CuteCom.

26 Aug 2014

Excellent! Thank you for the steps to make this work!

11 Oct 2016

I cannot see /dev/tyyACM0 in cutecom. I can open /dev/ttyUSB0 but this appears to have no output

11 Oct 2016

Ah I had to type it into cutecom. /dev/ttyACM0 was there when I did an "ls -l /dev"

Please log in to post a reply.