simple test program to demonstrate a (random) stalling of the mbed on a call to the interface chip

Dependencies:   mbed

Watchdog.h

Committer:
uci1
Date:
2015-01-21
Revision:
0:fcbed0c42196

File content as of revision 0:fcbed0c42196:

#ifndef MB_Watchdog
#define MB_Watchdog

#define WDFAILSAFE  (1200u)

// Adapted from Simon's Watchdog code from
// http://mbed.org/forum/mbed/topic/508/
namespace Watchdog {
    
    // "kick" or "feed" the dog - reset the watchdog timer
    // by writing this required bit pattern
    inline
    void kick() {
        LPC_WDT->WDFEED = 0xAA;
        LPC_WDT->WDFEED = 0x55;
    }
    
    // Load timeout value in watchdog timer and enable
    inline
    void kick(const float s) {
//        LPC_WDT->WDCLKSEL = 0x1;                // Set CLK src to PCLK
        // WD has a fixed /4 prescaler, PCLK default is /4
//        static const float clk = static_cast<float>(SystemCoreClock / 16);

        LPC_WDT->WDCLKSEL = 0x00;                // Set CLK src to Internal RC
        static const float clk = static_cast<float>(1e6); // 4MHz / 4 for WD prescaler
        LPC_WDT->WDTC = static_cast<uint32_t>(s * clk);

        LPC_WDT->WDMOD |= 0x3;                   // Enabled and Reset
        kick();
    }
    
    inline
    bool didWatchdogReset() {
        return ( (LPC_WDT->WDMOD) & 0x4 );
    }
    
    inline
    void clearResetFlag() {
        LPC_WDT->WDMOD &= ~(0x4);
    }
    
    struct SnKickStarter {
        SnKickStarter(const float s) {
            Watchdog::kick(s);
        }
    };
 
};


#endif // MB_Watchdog