mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.h
- Revision:
- 85:024bf7f99721
- Parent:
- 81:7d30d6019079
- Child:
- 90:cb3d968589d8
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.h Mon May 19 18:14:09 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.h Wed Jun 11 15:14:05 2014 +0100
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f4xx_hal_eth.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 18-February-2014
+ * @version V1.1.0RC2
+ * @date 14-May-2014
* @brief Header file of ETH HAL module.
******************************************************************************
* @attention
@@ -85,24 +85,24 @@
and the mode (half/full-duplex).
This parameter can be a value of @ref ETH_AutoNegotiation */
- uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
This parameter can be a value of @ref ETH_Speed */
uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
This parameter can be a value of @ref ETH_Duplex_Mode */
- uint16_t PhyAddress; /*!< Ethernet PHY address
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
- uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
This parameter can be a value of @ref ETH_Rx_Mode */
- uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
This parameter can be a value of @ref ETH_Checksum_Mode */
- uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
This parameter can be a value of @ref ETH_Media_Interface */
} ETH_InitTypeDef;
@@ -124,78 +124,78 @@
When disabled, the MAC can send up to 16384 bytes.
This parameter can be a value of @ref ETH_Jabber */
- uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
This parameter can be a value of @ref ETH_Inter_Frame_Gap */
- uint32_t CarrierSense; /*!< Selects or not the Carrier Sense
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
This parameter can be a value of @ref ETH_Carrier_Sense */
- uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
- in Half-Duplex mode
+ in Half-Duplex mode.
This parameter can be a value of @ref ETH_Receive_Own */
- uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
This parameter can be a value of @ref ETH_Loop_Back_Mode */
uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
This parameter can be a value of @ref ETH_Checksum_Offload */
uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
- when a collision occurs (Half-Duplex mode)
+ when a collision occurs (Half-Duplex mode).
This parameter can be a value of @ref ETH_Retry_Transmission */
- uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
- uint32_t BackOffLimit; /*!< Selects the BackOff limit value
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
This parameter can be a value of @ref ETH_Back_Off_Limit */
- uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode)
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
This parameter can be a value of @ref ETH_Deferral_Check */
- uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering)
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
This parameter can be a value of @ref ETH_Receive_All */
- uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
This parameter can be a value of @ref ETH_Source_Addr_Filter */
uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
This parameter can be a value of @ref ETH_Pass_Control_Frames */
- uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
- uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
This parameter can be a value of @ref ETH_Destination_Addr_Filter */
uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
This parameter can be a value of @ref ETH_Promiscuous_Mode */
- uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
- uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
- uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
- uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
- uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
- uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
- automatic retransmission of PAUSE Frame
+ automatic retransmission of PAUSE Frame.
This parameter can be a value of @ref ETH_Pause_Low_Threshold */
uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
- unicast address and unique multicast address)
+ unicast address and unique multicast address).
This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
@@ -207,7 +207,7 @@
This parameter can be a value of @ref ETH_Transmit_Flow_Control */
uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
- comparison and filtering
+ comparison and filtering.
This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
@@ -221,54 +221,54 @@
typedef struct
{
- uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
- uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
This parameter can be a value of @ref ETH_Receive_Store_Forward */
- uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
This parameter can be a value of @ref ETH_Flush_Received_Frame */
- uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
This parameter can be a value of @ref ETH_Transmit_Store_Forward */
- uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
- uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
This parameter can be a value of @ref ETH_Forward_Error_Frames */
uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
and length less than 64 bytes) including pad-bytes and CRC)
This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
- uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
This parameter can be a value of @ref ETH_Receive_Threshold_Control */
uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
frame of Transmit data even before obtaining the status for the first frame.
This parameter can be a value of @ref ETH_Second_Frame_Operate */
- uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
This parameter can be a value of @ref ETH_Address_Aligned_Beats */
- uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
This parameter can be a value of @ref ETH_Fixed_Burst */
- uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
- uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
- uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
- uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
This parameter can be a value of @ref ETH_DMA_Arbitration */
} ETH_DMAInitTypeDef;
@@ -1290,9 +1290,9 @@
((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
-/**
- * @brief ETH_DMA_Enhanced_descriptor_format
- */
+/** @defgroup ETH_DMA_Enhanced_descriptor_format
+ * @{
+ */
#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080)
#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000)
@@ -1700,6 +1700,12 @@
/* Exported macro ------------------------------------------------------------*/
+/** @brief Reset ETH handle state
+ * @param __HANDLE__: specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
/**
* @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
* @param __HANDLE__: ETH Handle
